GT OMEGA Classic Wheel Stand - Compatible with Logitech G923, G29, & G920 and Thrustmaster T300, T500, TX & TH8A, Comes with a Chair Link

the stand came partially pre assembled, and putting the rest of it together was pretty easy. i wish the instructions were a tad more clear, but you can figure stuff out no problem. the stand works great (pretty sturdy), and my T300RS GT stuff bolted to it no problem. plus this thing folds up which is great for ppl with smaller places. i was VERY surprised that this stand came with both the gear shift/handbrake mount, AND a chair link (circled in red in the photos). i figured i’d have to buy that separately, but nah! i can use my office chair and not worry about sliding around. it’s super clutch. very good value for what you spend, esp considering i can fold this joint.

I've used this with both the Logitech g923 and the Fanatec CSL DD. For the former, it works great, especially if you have a chair that is stable enough to press into its back (when braking hard). This becomes a requirement when using load cell brakes (e.g. CSL Elite v2) and CSL DD, because most (all?) load cell brakes require a lot more force, which means that if you have a computer chair whose back you can't lock, then it will be difficult to be consistent with braking. When using this CSL equipment, the GT Omega Classic still holds up, but does not stay completely stable: under strong FFB (force feedback) with the direct drive 8nm base, it shakes around a bit. Not enough to impact racing, but enough to be annoying. I suspect it would do fine with a 5nm wheelbase. So it's still a great value, but if you want something more stable for 8nm+, my understanding is the slightly more expensive GT Omega Apex is a more stable choice for not much more money. As for folding up, it's possible -- if you know you will only race on weekends, then it's very doable. But if you race every other day, it will be tiring, because this thing is heavy. Others have noted it's difficult to fold and unfold with only one person, but I found those complaints to be overblown. In my experience, it was not difficult to unscrew the hand-held bolts one at a time and "catch" the wheelbase as it lowers; no help needed.

This thing is heavy so it keeps the wheel stable while in use, lots of adjustment and mounting options so you should be able to find a setup that works with basically any chair you want to use. The metal is pretty heavy gauge and all the hardware seems pretty good, no issues with rounding off the cap head screws or bending the metal while really clamping everything down tight. The stand has little feet pads that keep the thing in place decently well even on polished hardwood. Overall pretty happy with this wheel and pedal stand.

I like many reviewers that I read, wasn’t too sure how this stand would be. So to put it plainly…it’s great. Very sturdy and was easy to put together, which didn’t take long at all to do, and it came with a gear shifter attachment that can be used on the left or right and attach either from the steering platform or from the bottom frame. I use the bottom frame attach point. I have been looking for a good stand for a while that wouldn’t take up a lot of room and was sturdy enough to last. I had seen other stands that had just one pole that attached to the peddle platform, and to me it doesn’t look like that would be too good with steering and torqueing put on the wheel at times. That may not be, but that is why I did not buy one like that. When I bought it they gave a 5-7 day delivery time for this, and I didn’t think much about it until I noticed that it was coming from Great Britain. Well I got it in just a couple of days! So great price (since I presume being factory direct) and great shipping, and all in all a great stand for my wheel and peddles and it collapses down for storage when you need to. The only drawback that I have with this is that you cannot adjust the angle of the peddle plate, which is minor in comparison. So if you are looking to buy a sturdy stand that will last and has a shifter mount included, and is at a great price compared to several others, don’t wait… this will do the job!

Been looking to set up a driving simulator for a while now and was going back and forth about purchasing a lot more expensive unit. But did not want to purchase one of those package with everything including seat which brings up the price. So I decided to take a look at ones with that I can use my own chair. As you can see from the photos, my flooring is ceramic tiles so the chairs moves around quite a bit. So I put set tape on the wheels for that alleviates the issue with chair moving freely but only temporarily. So that was one of my first requirement. It needed a bin like this one that keeps the chair from moving around when using the foot pedals. Second, I needed some type of surface where I can mount a small keyboard and a mouse. But as you can see, I am using an Apple Wireless Magic Keyboard and Track Pad. They fit nicely on the surfaces that are available on this unit. So I can control my PC laptop remotely without having to get out of the sim which is a huge plus. I am using it mostly for ATS so it's good to have a keyboard close by to operate all of the extra functions of a truck. I used some cable looms and zip ties to tidy up all those wires and actually, I am quite pleased with how it turned out. The sim is actually quite sturdy and the price was just right. Relatively speaking, at this price point of $130, I think it was a bargain. I think it will last me quite a bit until I get tired of it and move to something else. But for now, this setup is really good in my opinion. It provides that extra realism when driving.

Went together well and smooth, fit the Logitech wheel and shifter as stated. Extra parts were included that weren't in instructions, not sure if they were to modify what is there or go elsewhere? At any rate, it did its job at a good price point.

anteriormente usaba una mesa de madera, donde puedes poner la botana o algo así, desde ya hacia bastante tiempo estaba pensando en comprar un cockpit que pudiera plegarse y super indispensable que sea rigido, ya que, muchos de los que venden tienen una olgura. Este cockpit es genial, tiene una olgura pero solo si tu la ves de fuera se nota, si tu eres quien esta conduciendo ni la percibes, es realmente bueno y ese extra que tiene para poder anclar la silla es un super puntazo. Lo unico que si debes de considerar es que por lo mismo que es rígido, es pesado (unos 15 kilos) por lo que te va a costar trabajo en manipular y/o desplazar. Como se pueden ver en las fotos, el espacio donde juego es bastante reducido y sin problemas lo puedo acomodar a una distancia considerable para jugar y tener una buena inmersión en el juego. Lo malo del cockpit es que si vas a tener que pensarle on el instructivo, biene pre-ensamblado, pero lo que tu tienes que ir poniendo si es casi para decifrar cómo los tornillos para anclar el volante y los pedales. Fuera de eso no hay ningun problema. Si lo vas a comprar considera donde lo vas a poner, cuantas veces al día lo piensas usar, si lo vas a desplazar mucha distancia y mas que nada si tu día tiene el suficiente tiempo para colocarlo frente al televisor jugar y volver a colocarlo en donde lo pretendes guardar. Una vez que hayas tomado en cuenta estos puntos yo te puedo recomendar este cockpit, estoy muy satisfecho con esta compra. Si lo compras espero que te satisfaga cómo a mi. Nos vemos en el circuito!!! X: Tchalla08

Excelente stand, tengo silla con rueditas y con cualquier otro stand hubiera estado batallando con mantenerla en su lugar, sin embargo, éste modelo en específico trae un riel para colocar las ruedas de la silla y eso hace toda la diferencia. El stand es de buena calidad, muy estable, no se mueve para nada y trae todo lo necesario para colocar volantes de distintas marcas. El único punto a tener en cuenta (que no considero que sea negativo del todo) es que para guardarlo tienes que quitar 2 tornillos y después volverlos a colocar una vez que lo dobles, sin embargo son fáciles de colocar ya que tienen unas palancas para ese mismo fin y no toma más de 2 minutos. Lo recomiendo ampliamente, yo lo uso para un G29.

Took a really long time to decide what stand to go with and this one had a good price and great reviews glad I ordered this one and it came super fast set it up really quick instructions weren't great but just needed some common sense everything fit with no issues and am really happy with the unit nice and heavy not cheap thin metal didn't have time to secure the wires but it even came with starps to secure the wiring to the frame great purchase for anyone getting into forza or american trucking simulator

A little tuff to figure out how to set up, that's the only reason I gave it 4/5. Otherwise, it is a very stable support for my Logitech G923 steering wheel, pedals, and manual stick. With better instructions it would've easily been 5/5. Also the price is great!