OVV3D Silk PLA Filament 1.75mm, Upgrade Silver PLA 3D Printer Filament, Silk Silver Metal 3D Printing Filament, 3D Filament 1.75 +/- 0.02mm, Silk 1.75 PLA Filament for 3D Printer

The Dual Color PLA Filament is a game-changer in the world of 3D printing. The unique combination of red and blue in every inch of this filament brings a magical touch to your prints, allowing you to achieve a full spectrum of colors even in the smallest of prints. The different effects that can be achieved with different prints are truly remarkable, adding a whole new level of creativity and enjoyment to your 3D printing projects. The Silk PLA Filament is another standout feature. Specializing in silk PLA filament ensures that the surface of your prints is incredibly smooth and shiny, just like the glossy images you see in the product pictures. The easy-to-print feature, with a diameter tolerance of +/- 0.02mm, ensures a smoother 3D printing experience, while the high toughness of the filament leaves room for your imagination. The upgraded raw material from Europe has been developed and modulated to give a charming gloss on the PLA, ensuring no jamming, no bubbles, no tangling, and no layer lines. The eco-friendly packaging, with paper spools and boxes, is a thoughtful touch, showing a commitment to protecting the environment. The vacuum packing with high-quality desiccant ensures the filament stays dry. This is a product that truly delivers on its promises.

Update (original review below). Manufacturer reached out to me after my review and discussed what printing settings I had tried. After some troubleshooting, they agreed to send me a new roll to try. The new roll arrived quickly and after a bit of fiddling I managed to get two great prints out of the new roll. I will say that the filament was a bit more finicky than normal PLA but once I got the settings right it looks great. I attached two pictures above, one showing the quality of prints of an octopus. The initial roll is in front and the completed print is in the background and the second picture. I highly recommend this filament and would not hesitate to buy it again despite the initial issues due to the manufacturer's excellent customer service. I will start off by saying that this filament looks great based on the layers that I could get to print properly. That being said, getting this to print without adhesion and clogging has been impossible for me with various settings. Adhesion to the bed seems great and the first few layers print very well. After a few layers though it seems like the filament begins to clog the nozzle and then skips layers, eventually ceasing to print entirely. I have tried adjusting temperature upward in increments and also slowed down the print speed, but I cannot get good layers. I also hear a popping noise from the nozzle which makes me think that the filament might contain excess moisture. I have tried the exact same file with both normal PLA and PETG and it prints fine which seems to indicate that the culprit is this filament. If you can get this to print successfully I think it would look fantastic, but I have not been successful so far.

The texture on this is absolutely stunning. Everything about this filament just works. It's durable, pretty, and I was very surprised with the smoothness of the final print without any tweaking or troubleshooting. It has a wonderful sparkly look that absolutely did my Flexi Turtle justice. This is an absolute go to for any Flexi Factory model!

Great look when finished. Darker so some deletes might not show. But really cool affect.

Worked well, we used it up in a month printing Christmas things. Happy with the filament, did not have issues like some cheaper versions. The color was really neat and good for Christmas things.

Update: I had originally had the issue below. The seller sent me a new roll and it's printing flawlessly. The first roll seemed like it might have a moisture problem. I could hear it popping when extruding thru the nozzle. The second roll has been printing with no problem at 200 degrees; 50mm/s! -10S , V6 Hotend, TH3D EZABL bed leveling, TH3D Tough Extruder; I could not get this to print for more than 2 hours without clogging. Same model prints fine with Amazon Brand Filament or Hatchbox Cool Gray. Tried temps of 200, 205, 215 degrees with .4mm nozzle and then switched to a new brand new .6mm and tried 200 and 210 degrees with no luck. Used almost half a roll attempting to dial it in. Going to refund if possible. Filament seems unusually moist -- lots of popping sounds as it is being extruded. Unfortunate that I could not get it to finish. It seems to be beautiful effect/color on the object up until it clogs.

not the best filament i have ever used this stuff printed nice the first couple prints but now extrudes looking lumpy and gross wont be buying from this brand ever again

This is an amazingly magical color