Maxxima 72 in. Hardwired LED Under Cabinet Strip Light, 2760 Lumens, 3000K Warm White, Kitchen and Living Room 120V White Cove Lighting, No Power Supply Needed

Really am Happy with these lights. First off these lights ARE NOT LINKABLE. The one end is the wire leads, the other end, where you would link lights, has a cap with no option to receive wires to the next unit. So, they must be twisted together at the wire end and then connected to power to get multiple lights to work. This is probably why there is a note that says “people frequently return this item”. 2nd, these are REALLY NICE LIGHTS. I got them to replace some 20 year old LED rope lights. They are all connected to a motion sensor in the switch and turn on automatically. Once they were in and I turned them on the light in my kitchen turned into AMAZING. The light is bright but not blinding. The color temp is white but not that cold bright, hurt the eyes kind of white. Walking into the kitchen at 9pm and having them pop on is a new experience in light but I like it. I really don’t need to turn on the overhead lighting. Installation was easy and straight forward. On a couple of remote cabinets that had only one strip it was as easy as removing the old and attaching the new. But the main cabinets where I have 1 of the 18” between 2 of the 36” had to be twisted together at the center and then run a longer wire to the power. Not too hard. The clips that are included are great. The flat LED strip snaps right into it tightly. I mounted mine to face the back wall, NOT facing down like others may do. This washes the wall and bounces light all over the place lighting the area up like a professional set. I realize you can see the reflection in the marble (like the last set did) so I may cut an insert to cover up the wires. Overall I am very satisfied with the build quality, light brightness, and fit of these lights. I would definitely buy them again.

This improved the lighting over our kitchen sink. Much improved over the original and subsequent lighting fixtures, including florescent, halogen bulb and a battery powered rechargeable LED unit with proximity detection to turn it on. Clips supporting the strip work better than the magnetic clips for the rechargeable light, which were held to the cabinet bottom with thin double-sided adhesive pads. While I would have liked that it had an on/off switch like the prior fixtures, it is not a necessity.

Nice and bright! Good color match. Wire is a little thin but works fine. I didn’t use the clips.

Excellent. Seriously, get these. Easy to wire, and heavy duty. Mounted above my gas range. Two things to note: - They do put out some heat. Not crazy, but just enough to soften the plastic housing. - The material is fairly heavy, which I like! It’s not your flimsy LED ribbon that can easily break. However, once it warms up, it can sag a little between the plastic clips if you don’t use all of the clips. USE THEM ALL. Mine came with 9 clips. For measurements, I placed one at the furthest end on each side. I then had 7 left over which makes 8 spaces. Placing these at 5.75” intervals spaced them perfectly. No more sagging. Pics are before and after.

I bought 5 of these at different lengths, if you have hardwired option these are it. STOP looking for anything else. These are great quality, easy install, a lot brighter and just what the kitchen needed. I had bought puck lights from 2016 but they blew out and replaced with these. UPDATE: I added a dimmer and 100% functions and dims. For those that say it’s they are bright now you add dimmer problem solved!

These lights are great, with one small issue...they are VERY bright! I purchased 4, 3-36" and 1-24" for my average kitchen. The installation was easy, I actually used Gorilla brand double sided tape, 30 lb, so no holes were drilled. I spaced the sections about 6-8 inches apart, and easily wired them to my existing hard wires from my old flouresccent lights. When I turned the first one on to test, my wife commented she's gonna need sunglasses to work in the kitchen. After all four, I think we need welding glasses. I'm either going to replace the 36 in lengths with 24 or put some sort of light blockers every few inches. They're very nicely built, seems more durable than the continuous strips, just buy less than you think or spread them apart at least 12"-18".

work well, I have bought 5 of them

Nice bright light, easy to install. EDIT: Very sensitive to voltage fluctuations. Ran them off a true sine wave Victron inverter, and they had a bit of occasional flicker. They appear to be straight AC rectified to pulse DC and don't have any DC filtering included. Seems to have a slight color shading across the area being illuminated, but I've seen this before, especially in bare LED headlamps that don't have any kind of diffuser in front of the LED it self. Otherwise, the light works well.

Light strip works great , bright, easy to install and well make . I would highly recommend this product.

Good. No Power Supply Needed, hardwire directly to 120 Volt wiring.

Good sturdy quality. Nice and bright. Good price

Worked great but losing 1 star for the hardware being much too long for under cabinets

thre have a perfect brightness for the cabinet/counter area. was about the only solution for hardwired LED. we bought 2 to cover the L shaped corner. i do wish the cord was just a bit longer but i worked it out. i added wire clips to finish the job.