3D Printer Nozzle Cleaning Kit - 0.4mm Needles and Tweezers Toolkit - Stainless Steel Nozzle Cleaning Tool Kit - Alternative for 0.4mm Drill Bits for 3D Printer - Set of 11

Excellent tool kit to clean out air port clogged with dust particles.

My Bambu P1S got clogged, and I got it unclogged within minutes using this tool, make sure you heat up your nozzle first before you try to unclog it.

It's a very well made and useful kit. I tried 0.3 mm needles for my printer's 0.4 mm nozzle before and found them too loose (I'm new to 3D printing but already managed to clog the nozzle by playing with settings and switching from PLA to PET-G and back again). These ones have the exact size and fit perfectly. Be aware that low quality nozzles can vary in aperture diameter but it isn't the problem of this kit. I have a bunch of spare 0.4 mm nozzles from different manufacturers and aperture in some of them (about 2 from 10) is too small. Needles don't pass through them but as I said the reason is the quality of the nozzles. The original nozzle in my printer is absolutely compatible with the needle. I believe I can also use those needles to separate the good spare nozzles from the bad ones. Tweezers are very good to. The ones that come with my printer are flat and these ones are pointed that is useful sometimes.

I wish the handles of the bits were a bit longer and thicker. Theyre quite thin and can cause some hand cramping if i play with them for a long time with a nozzle. Easy to use other wise. For the price there should be an aray of sizes not just .4mm. Its like a nozzle cleaning kit for a oxy/acet torch, these come with many sizes.

LOVE the labeled storage container! The needles seem to be somewhat stronger and LONG enough to last longer than the previous ones I had, I find that any smaller diameter needles for .4mm nozzles are useless as they simply just tend to break too easily. Really love the cool looking storage container with a tight screw cap to keep them all neatly and safely together, makes them really stand out when you need them. The tweezers are a nice addition to the set though perhaps even a little too sharp for my liking they definitely help removing excess filament quickly when starting a print and the case provides proper protection for those thin tips as well. All in all a functional and safely packaged kit to keep .4mm nozzles unclogged with minimal effort, would highly recommend to any 3D printer owner! Get them before you need them.

I purchased this tool kit mainly to get the long reach angled tweezers, and overall am quite pleased with the quality of this tool. I have never used it yet to clear out a clogged printer nozzle, but I do use it every time I start a new print job in order to reach under the print head and peel away the first few strands of plastic goo that drip out the nozzle as it warms up. I particularly like the long reach of the angled tip for this purpose because it lets me get into an otherwise hard to access location. The tips of the tweezers are very sharp and perfectly aligned with each other; overall it's a great quality tool. I have not yet had any reason to use the needles (because my nozzle has not clogged) however I did measure them with my high-precision calipers and every single one came out at exactly 0.40mm no matter where I measured so I can say with confidence that the dimensional accuracy is good. Also I was impressed with how flexible the needles are, yet they spring back straight again right away.

Highly used & necessarily item

This is an excellent kit for cleaning 3d Printer nozzles. I am still new at 3D printing so I find that I am regularly clogging up the nozzles on my printer. I tried using small drill bits but they are have smooth sides and that makes it hard to twist and clean out the nozzle. Just received this kit and they work great! They are flexible so I can easily bend the needle to get it inserted into the nozzle. The textured handle makes it easy to grip and use. The tweezers are high quality and are useful for extracting bits of the filament. All of this comes in a handy storage tube. Highly recommend this tool kit

Clears my nozzle like a champ, the tweezers are real helpful. It comes in 2 tubes of 4 "needles" instead of 1 tube of 8. They are ofc flexible and can bend upto 70degree comfortably

aghi ben fatti e lunghi

Pour déboucher la buse de mon imprimante

I got a block in the 3D printer and was able to clean the nosels very easily.

Realmente cumple con lo exigido muy bien producto muy bueno la verdad