Waterproof Ceramic Glue - 30g Clear CA Glue for Pottery & Porcelain Repair, High Temperature Resistant, No Smell After Cure and Food Grade & Invisible Fix

This glue worked like a charm and the bond it made seems to be very strong ... I am not worried the piece will lose adhesion. I used this on poly-resin statue and the piece that needed to be repaired had a very small surface area to work with. I tried other super-glue type brands but they didn't hold and likely because they were specific to ceramic materials. This product did the job and was very fast in curing ... only a minute or two of me holding the pieces together is all it took. Also the pipe-like tubs that can be connect to the dispense tip was icing on the cake and allowed me to carefully dispense the liquid only where it was needed and no spill-over or cleanup needed. The bottle is a good amount so will last a while, if and when I run out I'll be re-purchasing this same brand.

This is cyanoacrylate glue in a well-designed package. The long flexible nozzles are critical for avoiding clogs and precise application. To get the most out of the package, here are instructions the seller forgot: Prep: * Blow compressed air through the nozzle to test if it is clogged. * Have scissors handy to trim the nozzle if it is clogged from last time * Before trimming, you can flex the nozzle around the clogged area to break up the clog and blow it out. You might avoid trimming this way. * Work on a disposable surface and wear disposable gloves. Have disposable paper towels handy for cleaning any stray drips. During: * Always use a nozzle. (3 included) Cleanup: * Blow compressed air through the nozzle immediately when you're done gluing so it doesn't clog. * Point the nozzle toward the disposable surface when clearing with compressed air so it catches the glue droplets. * Before putting the top on the bottle, place it upright and clear it by squeezing gently. Wipe off the glue from the top so the bottle is not clogged next time. Put the cap on immediately afterward. * Ensure the bottle is tightly capped. You can blow through the nozzles instead of using compressed air above, but then you risk getting glue in your mouth. The moisture from your breath can cause the glue to harden more rapidly.

This glue has saved my life since getting an orange kitten. He breaks something almost daily, and this has fixed 99% of the things he’s broken. Definitely recommend this glue, not so much an orange cat.

Works good and dries really fast, easy to apply- only issue is that it peels a little but still keeps the ceramic in place

Absolutely fabulous. Bought it to fix a ceramic mug and it’s held up for two months, being thought the microwave and dishwasher.

I've used this glue for practically everything, and it is exceptional. I even bought 100 additional applicators because I'm using it so frequently. BUT...I do want to confirm that although the glue is heat resistant up to 239 degrees, a glued mug will NOT hold up to a 350 degree oven. The three places I glued failed immediately, and butter flew everywhere. Nonetheless, 5 stars because the description does indeed specify a high-heat benchmark.

This sets within 10 seconds, and I've used I on everything from ceramic to plastic and rubber. Works well so far!

I used this to seal up a crack in a ceramic plate I made. This is clearly the WRONG product for this purpose because the glue flakes off. Super gross and scary; I don’t want to ingest this stuff! The glue has now mostly come off and the crack is back.

Strong bond! Fast drying. Takes one minute as described in the user manual. For peace of mind, I doubled the time to 2 minutes - just keep pressing it down. And it’s done. Can’t really see the glue and the joint under normal light condition. See the photo attached. Completely fixed my tea pot lid.