PAUTIX COB LED Strip Light White CCT Tunable 6400LEDs,CRI90+ 32.8ft/10m Dimmable 2700K-6500K 24V LED Tape Light,for Under Cabinet Bedroom Kitchen TV Mirror DIY Lighting(Adapter & Dimmer NOT Included)

Better than I expected - colors are great, no gaps in lighting etc. Easy to install on an acrylic sign I fabbed. Great product!

This product was a replacement for an older LED strip I had installed above and below my kitchen cabinets. The old one I had was not COB and you could kinda see the individual LEDs on the wall above and below my cabinets. This one, however, is great. It’s just a solid, clean light that shines great. The controller works flawlessly. I installed the power plug in the cabinet above the microwave (same outlet the microwave is plugged into) and have the RF receiver sitting on top of the cabinets. I had to extend the power wire so I could get the strip to start at one end of my cabinets, but that was a very simple step of splicing in more wire. This also allowed me to have all the wiring and components for this LED strip to be hidden out of sight. The lights get very bright and I like the fact that you can dim them and change the color temperature. So far, the adhesion has been great. It is 3M tape and hasn’t fallen off like my old one did. One thing I noticed that was a little disappointing at first though, was that this is not a solid strand of LEDs. The strand I received had a lot of places where multiple strips we’re soldered together. This worried me at first, but the solder job they did was great and it had zero effect on the lights. No dark spots or issues with the operation. All in all, this was the perfect strip for my application. If you have a little bit of electrical know how and can solder, you can make this fit your needs well.

I bought these LED lighting to replace my old lighting that I used when I installed the kitchen 35 years ago. I installed there LED strip lights and I am very happy with the results. The color temperature is adjustable from 2700k to 5000k and also dimmable.

I purchased these lights for a home install of a book Nook surrounding a tv. I purchased the driver and controller separately. These lights worked great. There was no flickering and installation was not an issue. They are extremely good for the price and for the easier install, you really can't go wrong. The only issue is that they are not a cut anywhere LED strip. They are almost an inch between each connection point. Thankfully, almost all the installation points for my setup were within half an inch of a connection point so there isn't any gaps in illumination. I highly suggest getting connectors and not soldering to these pads. They are extremely small for the white balance and color temp pads. Unless you are using good soldering equipment, you're better off getting the splice connectors. The controller I used had no issue adjusting the color temperature and the brightness of these over the 32 ft on eight separate strands of LED. As of now, the LED adhesive backing has held up extremely well. I highly recommend cleaning the surface you intend to set these on before removing the adhesive backing. Over time, I expect the heat of the LED is to you where out the adhesive but as of now, I have seen no delamination from the surface they were installed on.

use this LED for my under cabinet lighting per my friend's suggestion. The pron for the COB light is that you get a streaming -light instead of spot-light. Well, you'll have to get corresponding power supply for it.

As advertised. Love the quality of the LED light and the ability to control and change it.

Let me start by saying I've tried several different types of these LED light strips. My criteria was one that had adjustable Kelvin settings and a remote. Of the several I tried this one is the best. That said quality control is an issue. I bough 5 of these. One of those five didn't light up 2/3 of the strip because of a poor solder point. I got a replacement from Amazon for that one and the replacement won't light up at all. So of the 6 I've tried 2 were duds; not great stats. Also the remotes only control that particular strip it comes with. So if like me you have 5 strips you need all five remotes to control them separately. I contacted the manufacture and they claim there is a way to sink them for one remote to control them all but it doesn't seem to work. I've tried what they recommended a couple of dozen times to no avail. I'm using them to light IKEA curio cabinets so I want them all on/off at the same time with the same brightness/Kelvin settings. I've had to set the brightness/Kelvin manually on each and then hook them up to a power strip that I plug and unplug when I want them on; so much for controlling on/off with a remote. I'm not really thrilled with these but like I said, I haven't found anything better. Considering how much more expensive they are than other options I don't think the quality justifies the price.

طلبته يكون cct يعني يمديك تغير درجة اللون الابيض وجاني لون واحد بس درجة 3000 والكنترولر غير عن الي بالصورة حق تعتيم بس الي جاني

muy buen producto, ilumina muy bien, fácil de instalar , las conexiones son muy pequeñas para cortar la línea y volver a soldarla pero si se puede

Fácil de instalar

تمام.. بس المشكلة في نوع الفيش ماقدرنا نلقى له نفس القابس

Se descompuso con a penas unos meses de uso, lo instale en un consultorio y ffunciono bien como 7 meses de ahi empezo a fallar el touch... como no hay muchos dimmers compatibles con la marca, nos amarrann las manos