Convenience Concepts X-Tra Storage 1-Door Cabinet, White

These shelves are pretty sturdy, easy to put together despite the lack of detailed instructions. With common sense, it's pretty straightforward lol. No damages as others have found, either prior to or while putting it together. I ordered 4 so far, but only buy when the price goes down. (Monitor price changes daily, got mine for $97 CAD).

amazing product, clear instruction to assemble, great seller :)

I was a little concerned with the mixed reviews of how difficult this was to put together, but this was exactly what we wanted and beat the prices of other Possibles we were considering. Ease of Assembly: it took less than 45 mins to put this together. I assembled on the bed to avoid scratching the finish and I recommend doing so. I started with one side, at the bottom and worked my way up, then snapped the other side on and finished up my adding the magnets and finally the doors. Quality: this is particle board, but very dense with a decent, tough, laminate finish, so it went together tight, good joins, sat level, and with tight tolerances. There is no slop or wobble, it’s a very sturdy unit. Appearance: unit looks good with our woodwork, perfect fit in our chosen spot, and very useful for what we needed. I did shim the bottom to make it level, but I don’t blame the unit, the home we are renting is quite old and the floors are not perfectly level. Recommendation: Very good unit at a fair price, if the size and capacity suit your needs, this is an easy one to recommend. The instructions are not step by step, but if you lay out the pieces as suggested, it is easy to see how you should start to be successful.

I love this little cabinet much more than I expected. Although it neatly fits well in a limited space area, the storage spaces within this cabinet are larger than I anticipated. Originally, I felt a little overwhelmed to assemble this unit. However, the directions are straightforward, and every piece had a designated number along with a diagram to follow. Therefore, the assembly went faster and easier than my initial reservations and it only took me a few hours during the evening to build the entire cabinet. My other concern was the ‘dings’, dents and other imperfections of the wood. However, once assembled most of them are not noticeable, and the visible imperfections just need a black magic marker to camouflage a few little flaws. Required Tools 1. Philips Head screwdriver 2. Black magic marker to fill in any dings (optional) 3. Vacuum Cleaner to clean up the Styrofoam bits (optional) General Description and Measurements: This cabinet has a finished black veneer along the front, sides, top and within the cubicle areas. However, the backside shows the brownish particleboard, so it would look best with the backside against a wall. The cubicles, which include the top open one and the three with the magnetic door closures, all have the same size and storage area. CABINET MEASUREMENTS: Height – a bit over 46.5” Length – (from side to side) - 16.5” Width – (coming out from the wall into the room) 12” THE CUBICLES – the open shelf and the 3 storage areas with the magnetic doors are all the same size, and below are the INSIDE measurements for each cubicle. Inside Cubicle Height: (storage area within the cubicle) 11.5” Inside Cubicle Length: (storage area from left to right side) - 15.25” Width: (inside shelf area from front to back) - 11.25” (However, the doors fit within the cubicle, and each door is ½” thick, therefore when the door is shut closed this will take off about ½” from the front to back depth measurement. The last thing to note is the ‘open door radius. The doors open from left to right and the clearance space needed for the unit with the door fully opened is about 26.5”. I am noting this fact in my review because I wanted this cabinet situated in tight corner of the room. I had to move the other furniture a couple inches away, to accommodate the extra space needed for opening the cabinet door. I am genuinely happy with this small storage cabinet. The assembly only took a few short hours and went smoothly, all the different parts had numerical labels and the directions were easy to follow. Although, there were a few small dents in the wood, a black magic marker camouflaged these imperfections. The cabinet is very sturdy on our carpet, and I like the magnetic doors that enclose the lower bottom three cubicles as it provides a little privacy for storage and my items within the cubicles do not gather dust. Furthermore, they line up perfectly and do not scrape at all. However, what I really appreciate is the spacious amount of storage area, which is a lot more than I expected. Currently, I have my large capacity essential oil diffuser on the top, which is a perfect height to run my diffuser. On the open shelf that’s below my diffuser are more than 50 bottles of my essential oils, which are now accessible, and I’ve attached a sensor light at the top which provides full visibility, because it was dark within the shelf. I keep my assorted jewelry boxes along with my jewelry-cleaning machine in the next two cubicles with the doors. This gives me a little privacy instead of having my jewelry visible right on top of my bureau. In the bottom cubicle, I’m storing an extra heavy blanket along with my portable space heater that I use in the winter. It took up too much room on my closet shelves and I didn’t like keeping it on the floor. This is a great little cabinet, it was easy to assemble, and it’s a good-looking organization unit. Although it’s small, it has a spacious amount of room to reduce a substantial amount of clutter, and the cubicles with the doors provide a bit of privacy.

This shelf provides more storage plus some for all products needed in bathroom. Very easy to assemble, adds a nice decor look as well. Definitely recommend!