Dubili Full Tower Gaming Chassis (iBuildiShare Series) w/Preinstall ARGB Fan x 4 (Champagne Gold) (IW-CS-DUBILIASB-GLD)

自作PCケースはでかく、拡張性があるほうが、グラフィックボードなどが大きくなりがちな昨今では対応しやすく、エアフローもそんなに考えなくても済むので楽でいいです。 私は吉田製作所の動画をみて、こちらのシルバーを購入しました。開封時は商品紹介の画像と足・ハンドルになるパーツが逆・ゴム足もついた状態です。正直商品画像と同じ状態で組んでいてほしかった。昨今の器具不要で開けれるケースとは逆行して、サイドパネルなど外装の固定には六角ボルトが使用されており、毎回六角レンチが必要です。組んでしまえばそこまで気にならないかもしれませんが、組んで調整する際などはうっとうしいです。個体差かもしれませんが、ネジ位置が少しずれているのかサイドパネルの六角ボルトがすごく止めにくいです。 酷評していますが、組んでしまって使用している分には良いケースです。おすすめできるかというとフルタワーでもほかにいいケースはあるよと言います。

420mm support is great in this case. Using the Arctic Liquid Freezer 2 takes up pretty much the entire area front of the case and will move a large column of air about the size of the case. I'm using Noctua's 140mm 3000rpm fans in a push/pull on the rad in addition to the rear fan. Running a 4090 with a 7950x my idle temps for both are 34C/36C with 24C ambient on a quiet idle fan curve. Being modular helped with installation greatly. Though the Amazon versions of this case is not flat packed, disassembly is not difficult. I was able to install the motherboard effortlessly as the motherboard can be installed onto the inner panel completely separately. I was also able to remove the front face and mount it directly to the rad without having to hold the case, which is way better than trying to hold the entire rad within the case as with traditional PC cases. The titanium one is nice but if you prefer using the case where the aluminum brace is a handle rather than feet for the titanium color, it's a pain to remove the pads and its adhesive. I spent 30 minute rubbing goo-gone to get it nice and smooth. The overall quality is very nice, nothing is spray painted one side and the other is meant to not be seen. Though I wish the side glass panel wasn't very tinted as not a whole lot of light comes out. This is definitely a compromise to house RGB gaming aesthetic components in an industrial/minimalist style case I think. Overall this is a very very nice case and I hope to see mods for this case in the future. Something along the the lines of solid top/bottom panels or something crazy like an external radiator mount for the side panel.

This "champagne gold" colour they used does not look like neither gold, nor champagne. It is just a glorified name for a yellowish beige. If you consider the colour of the feet (orange-brownish) or the handlebar, it is clearly not a match made in heaven. I was very disappointed since I really wanted to make a gold-themed build, but there was none of it with that computer case. I guess the many videos I watched before buying used a very advantageous colour calibration. If you can get past the colour scheme of this PC case (at least in "gold"), the build quality looked very good (expected at this 300+ euro-price point). I did not bother to try it though, since the colour scheme was so far from what I expected.

Over the years I have used many case companies from Cooler master to corsair to lian li, and this case takes the cake and 5 stars. Amazing quality built, no case rattle, well throughout organization and just beautiful aesthetics. My only con is could be a little bit cheaper maybe, but you get what you pay for. Bottom line, this case will easily last you multiple builds and has tons of room to work with.

Will come back to finish this one up, but for the most part an excellent and solid PC case. The gold plated hardware looks awesome as well, but surprisingly the kit does not include a rubber coated hex wrench and just a regular wrench. Also, did not expect to have extremely slick hardware (screws) for the side panel access. These should definitely be surface knarled thumb screws for the side panel access. Maybe even aluminum anodized as well instead of plated pot metal. Like I said I will come back once I install the 4090 and components for a final take, but first impression is good….. minus the side panel screws being plated pot metal, with easily flaked off once used with the provided hex key. The back side also looks like it has ALOT of room for cable management! And included is about 10 zip ties, and 2-3 Velcro ties with hardware for mounting the Velcro ties wherever allowed. Excited to see how the included fans perform as well (not expecting a lot). Update 12/29/2025: The case is great! Fits the 4090 with plenty of extra room, and the GPU support bracket that comes with the case works great once you get it adjusted. The fans and airflow: The fans that come with this are actually impressive, move a lot of air, and not too loud, and the case includes a fan controller, with LED control input from your motherboard as well. The airflow is probably some of the best you can get with a case. The dust filters also do a great job and are magnetic for super easy cleaning. Pro-Tip: Get a small wire brush and vacuum out the assembly threads before assembly. For some reason, they paint the case sides AFTER tapping the threads. This means the screws have a tough time catching to screw in, and then the paint will pack into the screw threads. Overall a great case, and you can configure it however you want.