Wire Harness Compatible with NOCO(R) GC002 X-Connect, M6 (1/4in) Eyelet Terminal Connector

Picked this up to be able to permanently attach to my generator battery and feed my trickle charger. Plugged right up and work flawlessly. Very good quality and price.

Once installed, it is good to go for future connestion

Used as a quick charge port for a power wheels with a larger capacity battery. Had to swap out the fuse for a 2A, but it works well.

Evident high quality to match Nico's chargers and maintainers. Very easy to install without modification. I permanently mounted this to a truck I use for towing, and since it is not driven regularly, I use a Noco maintainer on it.

This does work with the NOCO chargers, but the wiring is a smaller gauge and the ring terminals are smaller than the original NOCO part. They won't bolt up to most automotive battery terminals without replacing the ring terminals, but they will bolt up to the original NOCO battery clamps, so if you're just replacing a damaged harness and using the clamps this one is perfectly fine. If you're using the harness to hardwire your car/truck for quick charger connection then I recommend just cutting the rings off and replacing them with the necessary size for your installation. Other than that the harness is good quality and will be good for slow charging/battery maintenance but I wouldn't recommend it for use on a "booster" due to the small gauge wiring. I wouldn't hesitate to recommend this replacement harness to those needing to replace a worn/damaged NOCO harness, or wanting to hardwire multiple vehicles for quick charger connections (which is why I purchased these). This allows you to leave the harness attached to the vehicles and simply unplug the 2-pin connector and move the charger to whichever vehicle you want/need to charge. I have several cars and sometimes I won't drive a couple of them for weeks at a time so I like to plug them in when not in use and keep the batteries maintained and ready, then when I swap vehicles I just swap the charger over to the next vehicle in the rotation. Sure, you can use the "clamps" but they are just bulky, and on some vehicles the clamps don't allow the hood to close, or they simply don't fit onto the battery terminals or make good contact to charge, plus they wear out over time, but a hardwired connection rarely ever fails.

Connection from a 12V battery to a NOCO GENIUS 1 battery charger.

Easy install, saves a lot of time and effort to connect charger, specially in motorcycle since battery sometimes is hard to reach.

Used for battery charger for my truck