❄️ Chill Out and DIY Your Way to Coolness!
The DC 12V DIY Thermoelectric Peltier Refrigeration Cooling System Kit is a high-quality, durable cooling solution designed for easy installation and rapid cooling. Featuring a compact design and whisper-quiet operation, this kit is perfect for various applications, including computer cooling and small space refrigeration. With a maximum power of 72W, it efficiently cools without the need for refrigerants.
H**R
Thermoelectric refrigeration cooling unit
The cooler is well built, and I bought it to play with and see if I could add it to my mini fridge when I was done. You must remember that you will need a 5 amp power supply and a temperature control module. I had it running stand alone in open air for hours turning on and off. I could not add it to my mini frig, but I still have it around for another project.
J**O
Works well
The peltier works well. You can feel how cold the small heat sink gets. The large heat sink heats up pretty quickly so make sure that the large (computer fan) is always running when the peltier junction is connected to current.The only thing that needed to be adjusted was that the small fan rubs against the small heat sink and does not turn. The fan needs to be offset from the heat sink.This is not a problem in my application since I will replace the fan with another fan or larger heat exchanger
J**R
Bueno
Bueno
P**R
How can I properly wire it without damage to the parts damage to the
Ot was not quite the system I was expecting. No instructions or specs of any kind.
P**.
Poor cooling
The hot side heatsink is too small for this application. It needs to be able to dissipate the 60 or 70 watts burned by the device, causing it to run too hot. The device can only cool to a specified delta-t (the temperature difference between the hot side and the cold side), so if the hot side is too hot, the cold side isn't going to be very cold. I tested mine and after the hot side heatsink warmed up to steady state the cold side was close to room temp.
D**
Works perfect
It's working properly, you just need to add a temp control or for replacement. Capacity cooling is equal to 1 feet.
M**A
It's awesome 👌
Easy to use and install 👌
M**S
ugh!
Bent heat sink, screws half installed, burrs & sharp edges, and no documentation.
Trustpilot
4 days ago
5 days ago