P12 Slim PWM PST (3 Pack)

From a sheer performance perspective, and I'm talking pushing the most air through your case or into a heatsink, and doing so quietly, these fans are tough to beat. Considering they're only 15mm thick, I put them into my own best-of-class category. But while they do work great, they are on the flimsy side. I'll give you an example. After looking up the stats and reading some reviews, I decided to replace a competitor fan (name begins with 'Noc') with the P12 Slim in a sub-5 liter mini-itx case. I found the P12 to have slightly better performance by 2-3 degrees C in my case overall, with the noise the same as the Noc, at less than half the price. Only, when I first closed the case, the P12 wobbled at slow speeds, making an obvious noise along with it at startup and shutdown. This lasted for about 3 startups/shutdowns and just went away. I checked cables and all were clear, so it had to be coming from the fan. Considering its the same size as the other fan, which had no weird noise issues, I just felt the word flimsy came to mind. Maybe it twisted slightly to fit or something? I couldn't tell by looking. I'm not going to take a star off for this, but just be aware. I would have returned it if things didn't settle down. But it did, and it's been great, and mostly quiet, as the primary cooling fan for a Ryzen 9 7945HS. I'm not undervolting, and yet my temps are stable and well under 80C in normal use with temporary spikes up to 88C max. For the performance and value for the money, this is one of the best fans on the market at the 15mm height size.

I installed these two slim fans in the GPU bay of my Fractal Design Node 202 mini-ITX case to help cool an RTX 4070. They immediately dropped GPU temperatures by at least 10 degrees C under load, while also reducing overall noise because the noisy GPU fans no longer need to spin up as high. The cable length is generous and works well for the Node 202, and since these fans can be daisy chained, I didn't need any additional adapters to plug the fans into a single fan header on my motherboard. I went with these Arctic fans over Noctua, because they're nearly half the price and still very quiet. Overall, I'm very happy with them.

I prefer these over noctua fans and to me it is not as loud and haven't had any issues with them over the last 10 years. Also they're way cheaper

works just as expected and gave perfect clearance, fans PWM function works well and moves air close enough to full size fans. Same quality as old artic fans

I used 2 of these for a deshroud mod of a msi 6700xt mech 2 that was getting way to hot with tj temps hitting 110 emedietly under any load, I also repasted the core and put new thermal pads on everywhere, I also needed a set of gpu pwm fan header to 4pin fan header adapter, now I'm not directly put hate on the 6700xt this heat issue was entirely my fault I had put this already hot running card into the wierd mounting position of an h1 v1 Rev1.0(I replaced the fire starter pcie risser and destroyed the old one so no worrys) and that case had the gpu verticle long ways with the gpu io down so the whole heat threw the channel design of most high end gpus with "heat to the back to the io" simply is turned on its head in this case BUT these slim fans fit perfectly and altho i do still get high junction temps these fans can spin at full speed and there whisper quiet unlike the ones from msi which were the only things I could hear in the entire home office...unexceptable...but these bairly fit into the space between the mesh filter and the deshrouded heatsink of my gpu and they don't make any noise at all and they do infact keep the regular temps down a bit so that's a double win in my book, I can sustain full load on the gpu without throttling so that's a successfull deshroud mod in my opinion and for the cost..ya I like this build now with its 128gb of ddr4 4000mhz and 5800x3d it has evolved to be a very nice linux dev and gaming system for me...

The small size is great for itx builds, and it wasn't loud. Was really impressed with this as it was part of a solution to help a problem with a build. My daughter has a small itx machine (super small case) where I upgraded her video card from a low power NVidia 50 series to a 70series and there was some airflow issues. I couldn't move the top fan down to the exhaust because of the clearance of a standard fan wouldn't fit over the heatsink on the machine. This one came in clutch though and the extra PWM sharing cable made doing wiring super easy, mostly with the limited fan headers on the ITX board. The fan worked fine for me. They aren't Noctua's, but it did work without issues for me.

These fans are good if you need some air flow, but are limited by space. If you can fit 20 or 30mm fans, use those instead for much better airflow. That being said, if you need some fans and are limited by space these are a good option. They aren't the best for moving large amounts of air but they will create airflow. I'm using them in a SFF build to move a little bit of air over a thin radiator that compliments a regular 25mm radiator. So far they have helped bring my temps down by about 10C. Which is all that I was looking for. With just the one 240 radiator I was seeing temps get up to the high 70s and I wanted to bring them down. After some research I found that I could squeeze a thin 240 radiator and a set of these fans between the gpu and the side of the case. It's not optimal, and the fans are about 1mm from the gpu waterblock, but it's just enough to allow a little bit of airflow.

Needed these to use in a system build for the exhaust fans on the top of the case. The original fans acquired were regular Arctic P12 PWM PST fans (25mm) and the Antec N200M MATX case was just too tight a fit with the radiator in the front, exhaust in the back and the motherboard cables coming over the edge. The 10mm gain relieves tension on the cables and provides better clearance for the liquid cooler cables. No problems with installation or mounting. Excellent fans and worked like a charm.

Fait bien le job.

top. everything works as described

Excellent

J’ai acheté ce pack de ventilateurs ARCTIC P12 Slim PWM PST pour optimiser le refroidissement de mon boîtier compact, et je suis bluffé par leurs performances. Ces ventilateurs de 120 mm allient un design ultra-fin à une efficacité remarquable. Le système PWM PST permet une gestion intelligente de la vitesse, ce qui assure un fonctionnement silencieux, même en pleine charge. Ils déplacent une quantité impressionnante d’air tout en restant quasi inaudibles, parfait pour garder ma configuration au frais sans bruit gênant. Le montage est un jeu d’enfant grâce aux trous bien alignés et aux câbles bien pensés. Et avec ce pack de trois, j’ai pu couvrir l’ensemble des besoins de mon boîtier à un prix vraiment abordable. Que ce soit pour une mise à niveau ou un montage complet, je recommande vivement ces ventilateurs ARCTIC P12 Slim. Discrétion et efficacité assurées ! 💻❄️

Used this in the cooler master nrp200v2 case as bottom intake. Perfect. Brand is very good, quality is great, perfect size. They fit right under my graphics card and pull in fresh air. Not crazy about RGB so the simple black is nice. The sound is also not very loud. I set a quiet fan curve but still moves good amounts of air.