Husky Liners — Rear Wheel Well Guards | Fits 2017-2024 Ford F-250/F-350, Black, 2 pc. | 79131

With what these trucks cost these days, it's a huge foul that Ford doesn't include rear wheel well liners from the factory. It looks totally dumb that the front has a nice liner and the rear is just raw paint. These are a perfect fit on my 2024 F250 Lariat. Install was super easy. If you have strong hands you don't need a trim tool to work the liner behind the fender lip like is shown in the manufacturer's YT install video. The install literally took 10 minutes per side. I had one mounting hole in each liner that was off by about 1/8". Easily fixed with a box cutter. I enlarged that hole a smidge and done. Not docking the product for that little thing b/c the rest of the liner is flawless. The engineer that designed the molds for these plastic liners should get a raise. They fit that well. Looks 100% factory. Shame on you, Ford, for making me buy my own. These liners are made of thick plastic. I don't see them ever wearing out. I will advise cleaning your wheel well REALLY good before install. Particularly the lip/arch. Dirt just sits there even if you hose off the wheel well very well. I used compressed air to blow the dirt out of the arch. Then I used a big car wash sponge and my car wash detergent/bucket to soap up the wheel wells really good and scrubbed them down. Rinsed really well with the garden hose. Used compressed air to dry it and let the truck sit in the 90-degree heat for a few minutes to let the rest of the water evaporate. You don't want to trap dirt b/t the liner and the paint if you can help it. The truck looks so much better now. Amazing how such a small change can have such a large impact. Now, the truck just "looks normal." Nothing special. But BEFORE the liners your eyes were immediately drawn to that appearance imbalance between the front and rear. At least my eyes were. This is a super easy install A 10mm socket or wrench is the only tool you'll need, assuming you can muscle the liner behind the lip without a pry tool. Highly recommend these Husky liners.

These fit perfectly and really enhance the look of the wheel well. Installation is super easy. The price is nice compared to Ford. These are solid plastic not the "fuzzy" type Ford has. Similar to a drop in bed liner. Just know, the shipping box is HUGE... im not sure why that surprised me.

Keeps rocks from chipping paint . durable and well made.fits good.worth it

They fit my 2025 F350 SRW well and install easily. The only issue is with the front mud guards. They say to use the factory screws, but the factory screws are too short. If you have a newer F series, do yourself a favor and go buy four (4) 1 1/4” #8 screws and washers before you start the installation. It’s only a few dollars to buy what you need, but very irritating that the mid guards don’t come with all the needed hardware.

Pretty quick and easy installation for my 2021 F250. Saw a review recommending a heat gun to help get it over the fender. That helped for sure. As the instructions said, the clip does not fit for one of the bolts, but I just held it behind, and against the edge so as the bolt turned it seated on the frame. Worked fine. Looks much better with these installed now!

This is my second set of these. First set was for a 2018 F150 and this set was for my 2017 F250. They fit great. Tight fit but that is good. No shaking around or rattling or anything. On light colored trucks I feel they are a must have. Wheel wells should be black, in my opinion, and they look so much better with these liners.

Nothing to it... no wrinkles. Perfect fit. 10 minutes each side. Read the instructions!! There is a drivers side and passenger side. Those who left a negative review, never held a wrench or screwdriver and it shows!

Shop around before buying these Husky liners. They are decent quality however the fitment lacks some detail. I'm extremely particular so after spending some time making modifications I finally got the liners installed. The biggest issue was that they were not flat against the fender well which means "wrinkles". After heating them and redrilling holes I got them looking much better once fully installed. Not a terrible product but may want to take a look at others before purchasing.

They fit the truck perfectly and there were no issues with installation. I question how long the tape fastener is going to last but time will tell. If I have any issues with the tape I will advise you.

Un producto con una excelente calidad en su material y con un diseño a la media cien por ciento apegado a lo ofrecido.

Perfect fit for my 2022 F-350 XLT. The instructions were pretty good, and I had no issues with the installation. The installation took ~30 min.

Purchased for my 2017 F-350 dually. I know, it says will not fit. But, I trimmed about 1” off the rear where it bumps up against the outer fender. Fit perfectly, the trimmed end is covered by the outer fender liner. The only other modification was to the top 5 fir tree push pins holding the Ford outer fender liner. Cut them to about 5/8” and they will not interfere with the new inner liner. Always impressed with Husky quality. These are no exception, put the outer Ford liners to shame, with the bonus of a perfect fit.

Front and rear fit perfectly. I did not use the 3m paint protection film, it was not cut deep enough to come off in its shape, and I got finger prints on it. So I decided the heck with it. On the front I used the #10 screws in stock locations as the stock screws were not long enough. Then I used the stock screws for optional bolting locations. Used a stubby screw driver on back for the 2 screws in stock holes instead of removing wheels. Took me a couple hours, but I’m slow. Think the paint protection film would take that long, that process just seemed like a pia.