VSTM OBD Interface ELM327 OBDII WiFi Diagnostic Wireless Scanner for Apple iPhone Touch
Description
- Notes: Does not support the Truck.
- SSID: WiFiOBD__IP: 192.168.0.10__ Subnet: 255.255.255.0__Port: 35000__Range: 50 ft (Line of sight)__Antenna: Internal__Power Consumption: 0.75 Watts__Wifi Standard: 802.11a/b/g__Operating Temperature: -15 to 100 Deg Celsius
- Only 2.7 x 1.25x 0.9 inches. It includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port.
- It is compatible with Most 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mode.
- Wifi ELM327 interface is able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode
With Proper Software Installed In The Host Device, You May Have Following Parameters Read Out From Your Vehicle: Vehicle Speed RPM Fuel Consumption* Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Vapor Pressure Fuel Trim Wireless ELM327 Multi-Protocol Support:ISO 9141-2 (5 baud init, 10.4 kbaud) ISO 14230-4 KWP (5 baud init, 10.4 kbaud) ISO 14230-4 KWP (fast init, 10.4 kbaud) ISO 15765-4 CAN (11 bit ID, 500 kbaud) ISO 15765-4 CAN (29 bit ID, 500 kbaud) ISO 15765-4 CAN (11 bit ID, 250 kbaud) ISO 15765-4 CAN (29 bit ID, 250 kbaud) SAE J1939 For Your Information: For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant. Most vehicles from 1996 in USA and Petrol cars from 2001,diesel cars from 2003/2004 in Europe are obd2 compliant. OBD II ELM327 Hardware Requirements: PC/iPhone/iPod/iPod Touch/iPad Important: Your PC requires wireless LAN router supporting WiFi 802.11 a/b/g for linking. ELM327 Software Requirements: - All ELM327 based software - iOS base software in Apple store: Rev / FUZZYCar / DashCmd / SpeedPORT / Nova Scan Attention: iOS base software are not included you must buy from Apple App Store! we only offer PC version software & Instructions manual (on the CD)
Common Questions
Trustpilot
1 day ago
2 weeks ago
