Phanteks Enthoo PRO M Acrylic Window Computer Case, Titanium Green Edition PH-ES515PA_TG

For the most part, this is an amazing case... and at this price point, it's definitely one of the best!Pros:- LOTS of room to work with. This is easily the biggest mid-tower I've ever built in.- The ability to add/remove modular drive cages (purchased separately) allows for extra clean builds.- Wonderful cable management potential. (It even has built-in velcro straps on the back side.- Looks great, without being obnoxious.- Mounting liquid cooling for my CPU was never easier... the removable 'cage' for the radiator made this job incredibly easy!- Removable dust filters are a definite plus.Cons:- The case only comes with one (1) SSD sled. Most people (including myself) have multiple SSD drives, so I had to order extra sleds @ $9 US each. I feel like there should be at LEAST two included sleds. They probably only cost a few cents each to manufacture... come on!- The acrylic window does not fit flush against the case on all 4 edges. There's a distinctive "gap" between the window and the case... and it bothers me, haha.- The included case fans seem to be a bit noisy/cheap, and seem to only operate at one speed. (This is no surprise, as I usually have to order aftermarket fans for new cases.)All in all, it's a great case! You'll need to spend a little more money to make it perfect, but it will still be cheaper than buying a "premium" case from one of the bigger manufacturers.

Wow, this case is nice. I have put together a few computers in my time, and I have purchased a few cases. I always go back to using my old aluminum lian-li case with a removable motherboard tray(2001?)Well, I have a new case that I am thrilled with. For starters, the area behind the motherboard tray has plenty of room for all the wires you could possibly run. The basement feature hides any unused wires from your power supply, and this comes in handy when you don't want to shell out a lot of cash for a full modular unit. All the places where wires are run have rubber grommets. It is wide enough to fit the largest air cooler out there and has mounting options for water cooling radiators. It has one slot for a DVD mount(I still use one). The power supply vent does have a dust filter, as does the top and front. The top filter is magnetic and can be easily removed for exhaust purposes. I got this @ $80 and it is only $6 more now. It even has a full acrylic window to show off your stuff...and lack of wire clutter :)The front cover can be popped off, but I worry the plastic could wear and break if you do that too much. It looks like you have an option to screw it on if you had to. Overall this case is great and I love it. For the price and what you get...can't beat it.

This was my first time building a computer meant for gaming specifically and here are my thoughts about the case.Pros:-Big case-10/10 would pay 90$ for a case that has fairly silent stock fansDid I say fairly silent stock fans?Pretty silent.-Cable management couldn't be any easier especially for a big casecomes with Phanteks velcro straps when you open the non-acrylic window sideand various placements of feedings holes for your cables ^_^-The feet are well designed because they have a wide/long enough standing space for it to not fall or tip over so easily.-I love the front side panel of usb and audio/mic jacks.-This is a good case if you don't want to spend more than a 100$ on a case-Case feels it has quality to itCons:-Only 3 colors - I chose Titanium Green-Acrylic window can EASILY get scratched - not for the faint of heart in the short/long run.-Screwing and un-screwing the acrylic window may be a pain for some peopleI took my time looking for my case and this is what caught my eye out of all the rest and I am happy with my purchase though maybe when I get another case it won't have an Acrylic window for the sake of it easily being scratched or no window at all.

Good size, good amount of interior room, only possible downside is that some screws are hard to find - as an example, I had to examine the case for a while before I figured out where all the screws for the top fan mount bracket (which slides out) were so I could install the fans. Not much of a downside, really, it works great and feels solid. and speaking of screws, the case comes with a lot of extras for the many types used on this case.Cable management is also easy, it comes with a lot of zip tie points, includes a lot of rubber cable pass throughs to hid cabling on the "back" / side of the case, and includes velcro strips too.It actually came with 2 140mm fans which was nice, I thought I had read it comes with one. Dust filters cover the top, bottom (PSU intake) and even the front - I had seen some people were concerned as it also has intake vents on either side of the front, but these also have a filter / mesh behind them so they don't need to be covered up.The clear window is nice, it comes with a protective cover. When screwed onto the case it does tend to flex slightly in the middle (as attachment points are in the corners), but I can only tell by looking at the edges.

Preso a 98,88€, quindi sicuramente non regalato, mi è stato consegnato con largo anticipo rispetto alla tempistica indicata; quindi grande Amazon!!Perché magnifico? Perché è grande, spazioso e gira aria fresca (filtrata!) in quantità. Si possono agganciare ventole e radiatori un po' di tutte le misure, che, se disposti in modo ottimale, vi abbattono decisamente le temperature.Oggi, per la prima volta, nonostante la calura estiva, ho giocato a Bf1, tutto ad ultra ed a 1080p, per un ora e mezza, marcando 39 gradi di cpu costanti, contro i 47° di prima.Il tutto nel perfetto silenzio. Se lo avessi letto in una qualsiasi recensione, non ci avrei creduto....invece...!Eppure la mia build, è la stessa, con la sola differenza del case.Bel prodotto davvero.Se ci tenete al cable management, qui è una pacchia! Non avrete più bisogno delle fascette per cablaggio in plastica, perché ci sono già le fascette di Phanteks, predisposte nei punti nevralgici.I CONTRO:Le rifiniture, sono un po' da rivedere: viti che si avvitano a fatica, il pannello trasparente ,in acrilico, attira polvere e si riga subito.Lo stesso non è in quadro di almeno un paio di millimetri, quindi per toglierlo tutto bene, ma per rimetterlo, sono bestemmie.Le due fan da 140mm, sono molto efficienti, ma se superano gli 820 rpm cominciano a farsi sentire se ci si trova in un ambiente silenzioso.Conclusione: lo ricomprerei al volo!

Acquistato a 85€ il case è meraviglioso. Ha un sacco di spazio e feature, la pecca più grande come scritto nel titolo è il prezzo che varia fin troppo e rischia di rendere tutto il prodotto non conveniente.Inoltre il pannello in acrilico laterale è di scarsa qualità e tende a rigarsi facilmente.

Il case è arrivato 5 giorni dopo la prima data prevista.È un ottimo prodotto per il suo costo, perciò ve lo consiglio se avete limiti di budget oppure (come me) non volete spendere tanto per una cassa dove ospitare il pc. L'estetica non è male, grazie al suo pannello in acrilico.Lo spazio dentro è abbastanza da permettere ogni build e di installare pure gli impianti aio.Il cable management è una favola con gli straps dietro, lo spazio grande e i fori dove far passare i fili (non avrete problemi neanche con un alimentatore non modulare).L'unica pecca, per cui attribuisco 3 stelle, è trovarmi alla fine dell'assemblaggio (prima è sconsigliato togliere il rivestimento al pannello laterale) il cartone appiccicato al pannello in acrilico invece che una plastica per proteggerlo. Per rimuovere il cartone ho graffiato il pannello, non faccio il reso solamente per la fatica di aver assemblato tutto, ma cosi non si fa!.