Neoprene Adhesive Foam Sheets, 12'' W x 59'' L x 1/2'' Thick Sponge Self Adhesive Rubber Padding Sheet Closed Cell Foam Sheet Roll for DIY, Multi-Function Soundproof Rubber Mat, Black

Worked like I needed it to. Easy to use, just enough sticky stuff to hold it steady.

Couldn't get a replacement pad for Bosch 1/2 pad sander. No longer made. Cut it fit. Adheres. Yet to try out. Would have rather had a replacement pad with the holes but at least I can use the sander. the replacement is over $300.

As the title states it's soft that parts Great! However I need this to stay on my surfboard and it's just pretty weak and coming off with a medium tug on pad. So I'm buying some waterproof glue to try to get it to stay on and handle the water as well.Great product just wish it was sticking good

Worked great to cover the useless and ugly accordion plastic on the sides of my AC. Now they are sealed up so bugs don't crawl in and they actually have a slight thermal rating. Some of my ACs had wings that fit this material perfectly, and I just slid the material in paper and all. The ones that didn't have the wings I just used an exact knife to cut the paper so only the perimeter stuck to the plastic.

இ ԲμⓏʐᎽ Rating:ѾѾѾѾѾ Highly recommended with warm fuzzies! 😍✔ Positives:✓ The adhesive backing is quite sticky, for indoor use at least.✓ The sheet matches the advertised 12"x59"x0.5" size.✓ Although $25.99 is still expensive, it is less than what some other Amazon sellers are pricing 1/2"-thick neoprene.✘ Negatives:✗ Nitpick: The seller should also offer 0.75 and 1.0 inch thickness neoprene sheets.✗ Another minor nitpick: How come no one sells red, blue, green, purple neoprene sheets, and black or white are the only color options? You can often buy neoprene yoga mats in 6 or 10 different colors.I bought this 12"x59"x0.5" neoprene sheet to use as a base material for homemade mouse pads, wrist rest pads, and armrest pads for the home office. The adhesive backing is quite sticky - this is basically a neoprene sheet with a sticky double-sided tape applied to one side.Here is the technique that I use to install larger sheets of any adhesive-backed material such as neoprene or adhesive-backed shelf liner or contact paper: use one hand or use some masking tape to hold down one end of the longer side of the sheet and, after you have precisely positioned the sheet in the desired location, gradually peel off the backing and press the sticky side onto the surface, using one hand or a squeegee to smooth out the sheet and working your way from one end of the longer side of the sheet to the other end so you do not have any air pockets or wrinkles trapped inside the sheet. Unlike some shelf liner contact paper that can be unpeeled and repositioned, you do not want to lift up and reposition this neoprene because the double-sided tape may detach from the neoprene and then you lose some of its adhesion if you unpeel and reposition this neoprene. So stick this precisely and get it right the first time. If you want neoprene sheets for outdoor use, you should buy non-adhesive sheets and use your own stronger adhesive to glue the neoprene in an outdoor setting because most adhesive-backed neoprene sheets that are advertised for outdoor use still do not use a good enough adhesive, especially if water or freezing or really hot temperatures are present.I also wanted some pieces of 1-inch thick neoprene, but the few 1-inch thickness neoprene sheets being sold on Amazon were really expensive. So I stacked two layers of this 0.5" neoprene and the adhesive is holding both layers together quite firmly to give me a 1-inch thickness.I have seen a few reviews where some people complain either this is not real neoprene or that 1/16-inch thickness sheets rip too easily. This feels and smells like real closed-cell neoprene, and real neoprene having 1/16-inch thickness does tear easily. Wetsuits use neoprene that is laminated/bonded to layers of butyl rubber, lycra, and/or nylon for durability, so you cannot compare a thin neoprene sheet to wetsuit neoprene that is laminated with other materials.

Use it for my sewing projects, whenever foam is needed. Perfect thickness, easy to apply to fabrics as an interfacing.

Product is very thin, and flimsy. Just peeling the backing off you’ll have the adhesive ripping off. If the area is going to be touched at all, it will leave scratches, and gouges. It was a waste of money, highly do NOT recommend

It is very sticky which is good as I was adhering it to a cement surface. However, it rips very easily and once applied any nick would show up. I ended up covering it with another padding as this was not going to hold up long term.