45.5in H x 36.5in W (2 Panels) No Dig Enclo Wilmington White Vinyl Privacy Screen, Outdoor Privacy Panels, Trash Can Enclosure, Air Conditioner Fence, Pool Equipment Enclosure, ZP19008

Great product if you're looking to screen some garbage cans or AC. Very easy to assemble and install. We only embedded the stakes in the soil and are going to see how that works over the year and then decide if we want to put in a concrete base but so far looks good. We had concern over the pvc stakes but they seem to be strong and also you don't have any corrosion problems over the years. I did tape the tops of the stakes so water doesn't fill them up and when it freezes in them would crack them. I also drilled a couple of holes on the bottom of the horiz. rail so that any water that got in would drain out and not allow frozen water to crack the PVC. Good product, others in our neighbor also purchased for their homes after seeing what we installed.

I absolutely love them. They look very nice and neat. They were not difficult to put together but the drill bit that was included was not sturdy it broke. We had another option. Highly recommend.

OK, so the end product was fantastic, but these panels were not easy. The first one I attempted took 2 hours and I had to start over twice. While the instructions aren't awful, they are hard to figure out. There's an important little clue that isn't mentioned in the directions. (See it in the third pic from the left.) There's a small outward notch, about 1/4" square-ish, that's on the inside, and at the TOP, of all 4 vertical poles. Make sure you have that at the bottom as you assemble it as shown...which is upside down. It's there for a good reason...to hold the top 4 caps on, which is the last step. I wasn't paying attention and had that pole upside down, at the bottom. Everything else on the side poles are identical, except for those little notches. So I had to take all of the slats out, disassemble everything and start all over. I also made the mistake of putting the middle horizontal, slat-holding beam, at the top. Oy-Vey! So that's what took me so long. Figuring out what was wrong and redoing it. So I thought the second lattice would be a snap to assemble...especially since I'd made so many errors (teaching moments) from the first one. But the 2nd one still took over an hour to put together. Here's a lesson I learned on that part. After sliding in all of the slats in the lower two horizontal bars, (see pic on the right) lay the whole assembly on the floor so you can move the slats up a smidge, from the bottom to fit into the top-bar horizontal slat holes. Gravity is not your friend if you try to do this while the assemble is vertical. This will make more sense when you get to this step. I'm not a novice at putting things together, but I did find most steps on this seemingly easy job difficult to do. Mostly b/c the instructions weren't that clear...and I effed up a bunch. However, it was worth the effort and looks great. I put the finished project in an L formation to block out our swimming pool heat pump. One last little thing that really makes this project shine is this.... I bought some plastic "leaves"...on Amazon of course, that come in 20" squares, 8 to a box. They fit the 48" lattice perfectly and can be easily attached with plastic ties to give the screen a fabulous look. (See pics 1 and 2 for examples.) Even without that extra foliage to hide whatever you want to hide, the 'picket screen' would have looked good. If you're a good DIY person you won't have any problems...but you do have to follow their directions...even those not mentioned.

I love this screen! It matches our home and deck so well. (Please excuse my flowerbed we are in the process of cutting back our plants for the season!) The quality is exactly what we were looking for without having to buy multiple panels. Also, assembly was a breeze, especially after we put our pride aside and read the install guide... But the middle rib is such a nice feature to prevent drooping or sagging. It went into the ground no problem. My husband and I put it together in about 30-45 minutes. I highly advise pushing your panel up against a wall or use a second person to brace the rail as you put the slats.

Looks great! I bought this to screen my garbage can from the neighborhood and it works perfect.

So I bought 2 sets of these hoping to hide my trash cans on the side of my house so my HOA would stop harassing me. This was not easy to install. I had to have my brother come over with his power tools. He was able to get one set together and we attempted put it up. We got the stakes in the ground but there was some overhang. Because there are tons of storms where I live, this product didn't last long. If I had to set up again, I would dig a small hole and put cement in ground for the stakes to have support and use a mallet to help them be more level with the ground. Because they didn't work right for me because I didn't have to proper installation doesn't mean it won't work for you. I just ended up paying someone to build a wooden fence with a gate.

Well built good quality plastic and bright white screen for my South Florida pool heater and pool equipment. Easy to assemble, took me 20 minutes and you can use a manual screwdriver. The included ground stakes go into the sand 12 inches. I'm buying another for my A/C. Quick delivery. Thanks!

I love how it hides my trash cans and divides my side yard to my patio! Highly recommending. The directions say it’s easier to assemble with two people and that is a TRUe FACT!!!!

Belle apparence et de bonne qualité Facile à assembler

Amazing product! Easy to put together easy to install & looks great. Contacted customer service about an issue I'd had & they went above & beyond. I'd HIGHLY recommend this product!

A little tricky to put together, but get product. We used ours to hide a hydro box in front of our home. Neighbours commented how nice it looks!

Product arrived with only 3 spikes instead of 4. I called Amazon, explained the problem, and within a couple of days I received a replacement. I removed the spike I needed and sent the product back. It was all so easy and efficient. It didn't take long to assemble the screen and place it to hide the heatpump. Thank you Amazon for your customer service.

Very quick and easy to build,and they look very nice. Very happy I ordered they give me privacy on my balcony.