Convenience Concepts American Heritage Logan 1 Drawer End Table with Pull-Out Shelf, Mahogany

These tables are hard to beat below $100. Looked for a year or so, after seeing these, to find a similar table. Particularly like the pull out shelf and a small drawer, however this design seems to be a bit rare.Assembly was fairly easy and was performed on a large countertop height surface, much easier, rather than on the floor. The tables are sturdy too. Changed the procedure slightly for the 2nd table by installing all CAM screws into place to minimize time and movement when glue is applied to the specified dowels. It was together in less than a half hour.The white paint finish was spotty in a few areas mostly where the trim meets the front of the drawer. The knob threaded hole of one of the 2 table shelfs was split during manufacture.A true measure of great customer service is how the company reacts to an issue. Convenience Concepts responded quickly to resolve the issues and within a day or 2 after initial contact, sent out a replacement shelf and some touch up paint.Think these tables are a very good value at their price point. Obviously the materials, drawer hardware and finish is representative of the cost. They are not fine furniture but incredibly functional and fit the need perfectly, small size, a draw and a pull out shelf. Met expectations and Would buy again!

Sturdy, beautiful color. A winner!

Bought this as a nightstand for young nephew the drawer is perfect for remote and the pull out is great for a drink or anything else he wants to set near his bed

The media could not be loaded.  All in all cute

These are nice tables for the price. Keep in mind that they are mostly constructed with particle board so be careful while assembling. The color is mahogany. I wish it was a little darker and maybe less red but it still blends fine with my other furniture. The pull out tray is a nice feature along with the spacious drawer. Don’t forget to install the long screw that screws through the back side of the slide out tray as this is what keeps the tray from wobbling around. If you’ve ever assembled furniture than this table should be no trouble and even if you haven’t it wasn’t difficult.

I purchased this end table for use in my living room. The table I received looked just like the picture online. However, when I received the end table the drawer was missing a side rail and the pull-out slide was water damaged. I called Convenience Concepts and they responded professionally and within a few short days I received a replacement drawer and slide. All-in-all I am very pleased with my table and the service I received from Convenience Concepts.

So I ordered two. The first one I opened was damaged on the side. There were only two holes for the pegs on one part, completely missing the other two peg holes. The wood is dinged all over, needing to find a cherry wood pen somewhere to fix it. The drawer was completely a different color wood than the base. So I had to mismatch pieces together from two boxes just to get ONE complete table. After I assembled it, I was not going to disassemble it and will live with the small wood dents. These aren't worth the money they're charging. Probably worth half.I have ordered a replacement for the second and praying that there is nothing wrong with this one.

This is about the Logan End Table:After reading the reviews of how easy this table is to assemble I felt like a complete moron when I unpacked the box and looked at the “assembly directions”. I’m good at assembly and this little table was, at best, as challenging to put together as herding monkeys through a Walmart. A positive note, each piece was correctly and clearly labeled. It was the directions that were really confusing. To put it together here’s what I did: I finally stopped reading and, like a pro, looked at the pictures. Yay! A mystery tube of glue is included but by using my special super powers, used it on the numerous dowels That are used for attaching lots of parts (within the step by step instructions, glue is not mentioned but is instead addressed at the bottom of a page outside the parameters of any directions)I recommend putting all the pieces on a large raised surface so you’re not bending down while assembling this table.Familiarize yourself with the metal connectors and put ALL of them in the holes first.As you go, prior to attaching the parts, glue one end of each dowel in place and then add a drop of glue to the other end of the dowel then carefully align the parts to snap them together.I wish there was a video out there but nope.The table is lovely once you run the maze. It is exactly what I wanted and I would buy another (I’d have no issues assembling another). The color is perfect and exactly how the pictures reflects. It’s well packaged and was undamaged upon arrival. It’s far sturdier than I expected.I’d recommend a piece of glass 18”x18” to protect the top surface since it will damage easily.Good luck assembling it.

Given the price point, this is a great little bedside table. The assembly was relatively easy (my husband did it) and I am pleased with the way it looks. For the money, I dont think you can go wrong.

Happy

The paint job was not very good. Also dirt prints were on the top.

Table d'appointBelle apparenceMeuble à assembler mais la précision d'assemblement laisse à désirer, les accessoires pour l'assemblagesont pas de qualité, un accessoire a brisé et j'ai été obligé de réparer le tout.Table d'appoint trop dispendieuse pour la qualité livrée