POWERTEC 6" x 20' Dust Collection Hose, 6 Inch Dust Collector Hose for Woodworking and Wood Shop Dust Collection System (70267)

Very high quality - a little thick & stiff to work with may need a heat gun or hair dryer to warm the material before inserting fittings. But once installed very good durable flex hose. Highly recommend for dust collection system flex sections.

I have this installed on a CnC machine / dust collector. I was having problems with static using a standard hose so I decided to try this one. I was initially skeptical of the anti-static claims but I have noticed a huge improvement with this hose, no more static shocks (which didn't really concern me) and no more CnC glitches (which very much did concern me).

I used this to connect my backpack blower to a gutter cleaning kit so I could use 2 hands to hold the wand while cleaning the gutters out. Worked awesome. Tried to use the kit hooked directly to the blower but was too awkward to use. This hose and 2 large hose clamps made blowing out the gutters a walk in the park. Bottom line- It’s good stuff!

Warning, I drilled my opening with a 3 inch hole saw, and this hose would not go through the hole. I needed a 3 1/8" hole for a squeeze fit, or a 3 1/4" hole for a slide fit. I am using it with an inline 12Vdc bilge vent fan. It went on the fan intake and exhaust flanges so tightly, I did not need any clamps (but it did go on). Not cheap, but looks like it should last. Not sure it is fuel proof, so I would not splash fuel on it.

I have a straw blower that needed a new hose. I wasn’t sure that this would work for that application but figured that I would give it a try anyway because the hoses that I had found that were advertised as a straw blower hose were 5x the price. This hose is almost identical to the original hose other than it seems to be a bit thicker and higher quality. I am extremely happy with this product!

Perfect size for hotwheels track or to roll balls through. I have used a blower on one side to push the balls through or setup for gravity runs. Kid has been playing with the motorized train through this tube for 30 minutes and counting. It probably works fine for dust collecting if it has held up for my toddler. If play slows down, use it as an instrument.

Clear and flexible hose for my dust collection system. Internal wire can be used for grounding the hose.

The description says this item is 10 ft long, but in reality, it is only 4 ft. Even if you stretch it to the absolute maximum, it barely reaches 6 ft. This is very disappointing as the size is nowhere near what was promised. Do not buy if you actually need 10 feet.

Nous employons ce produit pour le système de ventilation de hottes de laboratoire parce qu'il possède les caractéristiques nécessaires pour cette fonction. C'est facile à manipuler et installer. Je ne peux toutefois me prononcer sur sa durabilité. C'est le temps qui le dire. On m'indique 50 pieds mais déployé, nous n'arrivons pas à cette mesure.

Justo lo q requería para proyecto recolección de polvo

So I have bough 2 of these now. My intension was to be able to connect to my dust collector and use as a Vacume hose. Well it is in fact 20 feet at full stretch but under suction it wants to be 10 feet…not kidding…so a got a second and joined the two. Perfect…next my wife made me this 40 ft log sleave out of an old shower curtain. Its now got some real protection from draging it on my cement floor. The material is anchored at each and and it just bunches up with the hose when not in use. I dont have a pic, but if I can add later to my review I will do that. Only 1 thing and no big deal…but one hose had a slightly larger ID then the other…Oh also…the banding my second one had on it actually permanently distorted the hose in a few places…thats a bummer..,

Tuyaux fragiles à déchiré

Well made product