AKIA SCREENS125 inch Edge Free Fixed Frame Projector Screen 125" Diagonal 16:9 8K 4K Ultra HD 3D Ready CINEWHITE UHD-B Black Projection Screen for Indoor Movie Video Home Theater AK-NB125H

I am very pleased with the final result of the 125-inch fixed frame series AKIA screen. I was able to fully assemble the screen alone. I originally was concerned that the screen material would not stretch over the frame, and was certain that I was sent the wrong size screen. I contacted customer support by phone and was given encouragement that convinced me to continue. I reviewed several videos on assembly of these type of screens that use springs and slowly but surely was able to complete the process.My setup may be different than most. I basically did a ceiling mount (Actually floated from L brackets), so the frame is about 8 inches from my wall. This was needed as I had 2 windows behind my wall that would limit the size of the screen. Previously I had a 82 inch custom build projection screen that fit between the 2 windows on the wall. I always wanted to go much bigger on the screen but originally felt that would not be possible. Here is what I finally did:I added 6 L-brackets to the top of my wall. Four of the brackets would be to support the screen using the supplied Wall Brackets. (The directions tell you to use 2 of the brackets for the top and 2 of the brackets for the bottom. I changed this and placed all 4 of the wall brackets on the top.I purchased a large curtain rod from Amazon that was adjustable from 120 to 170 inches. This Rod was simply supported on the top of the 6 L-Brackets. I also purchased 8 Theater Grade Extreme 100% Blackout Grommet Curtain Panels, 52” x 95”. 6 of the panels were black and for the ends, I used 2 red panels. This took care of blacking out the background from the 2 windows, and I was now able to have full light control in the room.I was able to make 4 custom metal bracket adapters that I painted flat black, which allowed me to mount the screen to the L-Bracket and wall mounting brackets to float the screen. Wire or other mounting options would have worked here as well.The screen had a tendency to angle in toward the wall slightly. For this reason, I placed 2 additional L-Brackets at the bottom of the screen hitting the Frame so that the screen was now perfectly vertical. The curtain panels completely hide all brackets and the screen has a nice floating look.I am considering adding 2 4x4 blocks cut to size from floor to the bottom of the screen to relieve any pressure on the bottom of the screen. In all honesty, I am not sure this is even needed as the frame this screen is supported on is very heavy duty, and I doubt any sagging would occur over time.Overall, I am very happy with how this has turned out and I believe the screen is of exceptional quality and a very good product. The only issues I had are as follows:Tension Rods: Horizontal rods, were fine with proper overlap. The 2 Vertical rods were too short. The rod length just matched the length of the outside holes of the fabric. This result on one of the sides tearing through the mounting hole. I ended up having to purchase 2 brass rods of the same diameter to get some overlap for the springs to attach to the frame.While nowhere in the manual is this mentioned, I found it much easier to mount the screens with the spring oriented in a certain direction. One end of the spring seems to make a perfect half circle (Better for tension rod), and the other end, is less angled, and that end seems to more easily mount to the metal frame. Also, I found that in many cases it was easier to first start the spring by attaching it to the frame, and then pull it over through the tension rod hole.The supplied Allen wrench was not of the greatest quality. It was starting to strip as I was tightening the screws. I switched to a much higher quality Allen wrench I had, which greatly improved my ability to tighten down all screws without slippage or striping.Overall, I am very pleased with the result. It is a bit of work, and my fingers are still a bit numb from stretching the springs into position, but the supplied tool does get the job done.

This is my first foray into home theater and I could not be happier. I got the silver ALR/CLR 100" version, paired with the new Philips Screeneo U5 UST 4K.Setup was, well, not exactly quick, but the directions were surprisingly clear and all went off without a hitch. You do need to be somewhat handy to mount it properly; MEASURE CAREFULLY and use a level extensively if you want it to look good. Assembly was a bit exhausting as there are dozens of hooks and springs, and hanging is a two person job. That said it's surprisingly lightweight and was very easy to hang. Also there were no flaws or other damage on the screen. It comes rolled in a tube with a protective sheet against the screen side. As long as keep the screen flat on the floor with the sheet under it during assembly there's no reason there should be any damage.The picture quality is outstanding. Contrast is excellent. Picture is amazing in a dark room of course but even during the day with blinds only (still a good amount of ambient light) I could see the picture just fine. Only when I had a bright ceiling light on did the picture become a little washed out, but I didn't even have the projector on the brightest possible setting and if I were watching something bright like a football game it would've been totally fine.I truly don't get why screens should cost $1000's. Maybe it's the difference between a $100 wine vs. a $1000 wine. How many people can actually appreciate the difference, and is it truly worth it? I can't imagine how this screen could be improved, and certainly not by an order of magnitude. My only regret is that 100" was the largest size I could fit in the room. :)

I had been projecting my Samsung LSP7T onto a plain white wall for a couple months while researching ALR/CLR screens for ultra short throw projectors. The picture quality was good, but very washed out during daylight hours. The projector is being used in a living room with 12' ceilings and 9' windows so it was no surprise, hence the need for a UST screen. I wasn't prepared to spend $2K+ on the higher tier options, but didn't want to go with entry level either. From my research, Akia Screens are produced by Elite Screens, and at $549 for the 103" it seemed like a good compromise.Bought it, built it in about 2 hours, hung it, and am pleased overall. It is tensioned all around using small springs to keep the screen perfectly flat. Make sure you alternate opposing sides as you put the springs in. If you've ever put together a trampoline for kids, it's the same theory. Put on spring on, then put one on the exact opposite side. This will keep the tension even. I actually did top middle and bottom middle. Then left middle and right middle. And worked my way out from there. Figured it was worth the extra time and effort to ensure a perfectly flat surface with no ripples. In the end, maybe it was overkill, but the results were perfect.Daylight viewing is great for bright content like sporting events. Not so much for movies especially with dark scenes. The black level is simply not good enough to overcome the ambient light from my large windows. To be fair, I don't think this is the fault of the screen of projector. The blacks can only be as dark as the viewing surface and the daylight coming in at screen level can't be overcome. However, I am pleased to be able to watch sports in good quality in the middle of the day with no blinds drawn and windows wide open.At night or with light control is where the screen really shines. It improves the contrast and sharpness against projecting on a plain white wall. Movies really pop and I have to turn down the brightness and contrast on the projector. The only reason I'm giving the overall rating four stars is the instructions to mount the screen are minimal at best. I measured thrice and drilled once, but still had to use the adjustments on the mounting brackets to make the screen fit perfectly without using image adjustments on the projector. You want to avoid image correction as much as possible for the best possible image and to prevent oversplash of light outside the borders of the screen.