MBP Versatile Bike Block - Thru AXLE (15x110 12x100 15x100) & Quick Release 9x100mm - Bicycle Truck Bed/Storage

Fork Mounts for Disc Break bikes (AND RIM BREAK):I have been doing a ton of research about this, and have purchased multiple units in order to find something that fit the Cannondale System Six - Speed Release set up.I finally found some thing that is not only reasonably priced but seems as though it’s designed to fit virtually every set up out there. I have 13 bikes, and this unit fits every single different set up I own!!!It was just under $30 from Amazon and fits not only Thru AXLE 15x110, 12x100, 15x100 BUT ALSO Quick Release 9x100mm.For anyone out there still doing a bunch of research:The inner fork spacing on through axle bikes is almost always 100mm or 110mm. (Even when yours May say 140mm for the Speed Release, that is actually outer spacing not inner spacing) This unit covers BOTH of those spacing!!!!The thickness of the axle is almost always 12mm or 15mm for Thru Axle and 9mm for QR (Quick Release skewers)This is very reasonably priced, well-made, and secure!

Works perfectly for what it is. I initially tried purchasing a cheaper option that appeared to be the same thing and it was terrible (thru axle did not fit well, the cups that adjust the size and width of the axle would not go in straight). This one was perfect. The cups were easy to install and are snugly held in place with o-rings. Love it. I couldn't find a good rack for my mountain bike, but found that it fit in my car without the front tire on. I used this with a piece of 2x4 to build a little removable rack in my trunk that holds the bike in place. Saved me a bunch of money and no more need for a roof rack.

This clamp sits very low to the base plate; which is nice when parking your bike under the bed in your RV. But it makes it difficult to turn the thru bolt when attaching the front fork. The mount is only as solid as what you attach it to. I would recommend drilling out the mounting holes and using a 10 mm bolt.

This has given me so much piece of mind and security!!!!Mountain biking is life. I’ve been transporting 2 MTBs on a $500 kuat rack, on the back of my truck, for 8 years. Traveling to destinations all summer. I’ve had bikes stolen off this rack twice! Once in broad daylight at moab brewery. Once in idaho when I went in to get a coffee and breakfast burrito for 10 minutes. Professional thief's used cutting tools to grab 20k worth of bikes in 1 minute.I bought this and installed it in my truck bed that has a cap. Now, our 2 bikes are hidden in the truck bed. They aren’t exposed to the weather on a long drive. I’m not paranoid about bikes being rear ended on roads. I’m not worried about going inside the gas station to buy something. I’m not worried about theft when eating with friends after a ride while they go outside every 5 minutes to check.The attachments have fit all of my bikes thru axel/fork sizes as well as my friends bikes! One size has truly fit all!These have been through the ringer and held up. Attached bikes to them at least 200 times this summer.

I bought this to transport my new Trek Domane SL-6 in my motorhome. I mounted it to a 20” long 2x4. I then transport the bike inside the motorhome. The different size axle spacers make it work for most applications.

Solid item for what I needed it for and that was to allow me to transport my bike inside my SUV securely. When fastened to a simple 2x4 it worked amazingly. Pro tip, if you are looking for an option to transport your bike inside an SUV and use a 2x4 to stabilize it, staple a few pieces of Velcro to the 2x4 and it won’t go anywhere.

Solid product and nice to have the option to switch the axle type should you need to.Would be cool if they provided SRAM Torque Cap adapters for Rockshox forks though - it's a little hard to slide the axle through with the normal 15mm adapters since the fork doesn't self center due to the larger machined recesses for Torque Caps. Minor issue though.

The adaptors for 12 x 1000 axle are too big. Sorry I missed the reviews that had same experience.

This product is designed to be a mount for your bike in the back of a van or the bed of a truck, however with a little modification to my front roof bar it also works as a great roof mount - and much cheaper than a “proper” one! I had to drill 2 holes through my roof bar to bolt this mount onto it, and that’s it.It comes with a variety of adaptors to suit most hubs from a standard QR all the way up to a 15x110mm thru axle that simply push in. Although I’d recommend removing them and keeping them somewhere safe while driving when the mount is not in use especially if you’re mounting it to the roof like me, as they are quite easy to remove and may fall out without a bike mounted to them.It holds my bike securely and it hasn’t moved once while I’ve had it on the roof. Fitting the bike to it and removing it can be done in a couple of minutes. The only thing I had to do was to strap the rear wheel to the rear roof bar - mainly for my own peace of mind in case the rear of the bike bounced around up there as I drive a low car with quite stiff suspension.The quality seems good, and I haven’t had any issues with the finish fading or chipping away as some other reviews have stated, although it’s only been fitted for around a month now.Overall I’d recommend this product as I actually trust it more than I would a dedicated roof rack, as I have seen the outcome of the flimsy plastic that the clamps on them are made of failing. Coupled with the fact that it’s around half the price too and it was a no-brainer.

Er ist super passt fast an alle Gabeln durch die mitgelieferten Adapter. Leider ist die Halterung zu Klein für die Fox 40. Sonst ist die Halterung einfach massiv und leicht durch 3 Schrauben an Wand und sämtlichen Unterlagen zu befestigen.

Seems people are complaining about the tolerance. Mine seems exactly 110mm which is what I needed. Also the qr adaptors work fine on my bike with no rubbing.Havent had it for long so can say about the fading of the paint etc.Yes you may need to raise it on something to screw up common thread in through axle adaptors and it can be fiddly to mount.The adaptors fit pretty snugly on my unit but I would remove them and keep them out of the elements when not in use as the sun and heat will eventually ruin plastics and the orings making them fall out. I just keep them in the vehicle glove box.

Super schnelle Lieferung, Produkt entsprach den Erwartungen,im Verhältnis zu der Fahrradhalterung mit Schnellspanner etwas teuer,aber immer noch günstiger als fertig gekaufte Halterungssysteme

Unfortunately I returned the item as the block did not fit the front forks of the bike. When putting the 12mm thru axle bearings into the block and tightening up the block, the main casing diameter was too large and chipped the paintwork. Hence the return. A shame as it was a solid built, just not quite there.