LED Dimmer Switch, Trailing Edge Double Dimmer Light Switch for Dimmable LED/Halogen Lights, Rotary Push On/Off, 2 Gang 1 Way/2 Way, 3-150 Watts, White

This has replaced the old dimmer switches. Prior to changing to these the lights were flickering a lot. Bulbs were changed etc, then the thought was to change the switches- no more flickering now. They look fine.

Good product - dims well

I initially put a cheap EverReady dimmer switch in my office to control the main dimmable LED bulb that lights the room. The buzzing sound emitted from the light fitting was intolerably loud unless the light was on full. At the time I didn't know that you need a specific type of dimmer for dimmable LEDs. After some research I found that the best option was a trailing edge dimmer, and settled on this one specifically advertised as being compatible with low wattage LEDs.This switch has almost eliminated the buzzing entirely. It is still there but it is not really audible to me unless I sit in silence and really try to listen out for it. I am using a Philips B22 dimmable bulb, similar to model number 8719514323872 but rated for 7.5W 806lm (I think the bulb I have is discontinued now).The switch was very easy to install, and I am actually really happy with the faceplate. It is made from Bakelite (or something like it) rather than Nylon or whatever they're usually made of. It has a very nice subtly textured matte finish to it and a much nicer feel than the usual plastic switches. The two white plastic plugs that hide the screws are a nice touch too.I reluctantly knock 1 star off only because the buzzing is still present, albeit incredibly quiet. I suppose this could be to do with the wiring in my house, the light fitting or the bulb itself and it is so quite it's basically inaudible unless you try to hear it. Consider it a 4.5 star review.

Work great looks great easy to install

Installed this to dim my LED kitchen downlights.It works well.Please note you must have the special dimmable LED light bulb units, otherwise this will not work.

At 1/3rd the price of similar item from most DIY stores, this is fantastic value for money. easily fits to a standard switch back box. easy to wire in. No issues with this items manufacture or delivery, definitely recommendedone note of caution, note on paper the cables positioning in your old switch before undoing them, I didn't and got interrupted after taking off the old switch and connected to the new one in wrong order, took another 2 attempts to get the correct sequence. if its a single light switch for one light, that might not matter, but where you have 2 different switches, you really need them wired the correct way round.

No good for 50W dimmable LED fittings. Gets warm and turns off after five minutes, then on for a while, repeat. The lights only dim in two stages rather than linearly, and flicker badly in the middle. Also the earth lug has tiny spot weld and broke off. Off to buy better quality one, hoping it's not the light fittings at fault

Works perfectly well with a good clear "click" action for on/off.Only reason for less than 5 stars is that one of the screws seems malformed. None of my flat drivers were quite narrow enough to fit. Using a precision driver it also didnt want to "bite" into the fitting. Used on of my old screws from switch being removed.