TotalBoat405721 Thixo Fast Cure 2:1 Epoxy System

After removing a four foot piece of corroded aluminum trim, I discovered I needed to grind out some old fairing compound from the top of my transom and fill the void with a high strength alternative. Thixco was the perfect solution. I applied it in two layers, making sure it was pushed all the way into the joint. It held its shape without sagging. When it dried the area was rock solid, needing no sanding or grinding into shape. The dried epoxy will prevent any water intrusion into the transom. I capped it with a new piece of 90 degree anodized aluminum using screws and sealed with life caulk. It looks just like new.

This is an amazing product. Does everything the company claims it will

Excellent product. Keep in mind this contains FOUR ounces of product.

I purchased this product on the recommendation of a popular woodworking YouTube channel. Product claims that it hardens within 2-3 hours. Six hours later, still wet. Very hard to squeeze the product out using the recommended caulking gun. I needed to put the handle in a vice to extract enough epoxy because I couldn’t squeeze the handle with my hands. Nice concept but poorly executed.

I used this product to fill in old transom holes. I prepared the holes by drilling them clean, applying expoy resin to the inside of cleaned hole allowing it to cure for 24hrs. Then I applied the Thixo thickened epoxy to fill the hole permanently. I also used Thixo to fill various old screw holes and chips in both wood and fiberglass.Before using the mix tips, squeeze the tube with your gun to ensure an even flow of material from both sides of the tube.Then put on your mix tips and use accordingly.Failure to follow instructions will result in uncured, soft sticky epoxy. Allow 24hrs for complete cure.Update:Using this product in high heat direct sunlight will cause the product to cure very fast within minutes, I recommend a cool 70-75 degree environment to allow for the time to dispense the product. I also recommend using a powered caulking gun to dispense for the quickest and consistent application of the product allowing for working time before is cures.

Simple to use and worked great

This epoxy does not look good on hardwood flooring.

Cures fast. Very hard.