Professional Pull Press Sleeve Kit 28 pcs Remove Bushes Bushing Bearings Seals

I bought this to press out some suspension bushings and was surprised how well it actually worked. It isn't compact when assembled to work, so don't think you are getting it into tight spaces. I needed 4-6" both sides of the bush being removed.For the amateur mechanic that doesn't use the tool all that often, this was a good buy.

you need a 23mm wrench and a deep deep deep socketquality parts, very heavyhad every size for the big bushings but to big for the small bushings . i used an small impact socket as the pusher

After lots of effort removing the first bushing and the lots of effort to get it pressed straight. I could not get a second bushing removed as the sleeve kept going in at an angle. I eventually figured out it was because the spindle bent fairly badly. So it was helpful, but next time think I will use a hydraulic press and the sleeves might help for that. Also bought a new better m16 all thread, maybe that will work for bushings in parts I can’t remove and place in press.

Nice choices for size and appear to be strong but just too big for pulling cadillac srx rear end bushing out.

I haven't had a chance to use this yet but it seems like it should work. Looks to have everything I'll need to remove and install the upper control arm bushing in my ZJ.My set was missing the 12mm bar, nuts and washers, it did have an extra 10mm threaded rod but not the nuts and washers. Not a big deal for me since I don't need the 12mm and having an extra 10mm threaded rod around is never a bad thing.

Was able to use to press out, and press in Honda bushings.

This is heavier than you think. The quality was surprisingly good. Different diameter help select right one for the bushing. I used mine for bnw 535i differential bushings. Did outstanding work.

All threaded rod broke at first try. I kept it too long to miss the return period