Hard & Fast Metal Epoxy Putty, Sets Steel Hard in 10 Minutes, Colour: Grey, 50g stick

Brilliant stuff. Very strong repairEasy to use and provides and neat and firm repair for metal applications

We had a problem with the grill door on our caravan oven. They use round "rivnuts" in a thin sheet steel oven casing. The screws worked themselves loose on the grill door hinge. I went to tighten them up, but the screws just kept spinning. Round Rivnut is just spinning in the round hole, meaning the screws holding the hinge wouldn't tighten up. Potentially an "oven out" job to remove and replace the failed rivnuts. This meant disconnecting gas pipes etc - not a job I really wanted to do. Looked at a Rivnut puller, but potentially it was still an oven out job due to access. Done some research and settled on this metal putty from Evo Stick. You cut a strip off and mix it up. Its sort of dark and light grey as it comes, and the idea is you knead it until its all one colour. TOP TIP - the putty has a clear film around it, ensure you also remove this before you start kneading. I missed it, and it meant the putty had stringy parts inside it. Once mixed, I put a small amount on the back side of each of the rivnuts, gaining access with my finger through the square hole - photo 1. Prior to applying, I cleaned the area with IPA to remove any grease etc from the area. I squished as much of this stuff as I could over / around the back of these fixings, and left it to cure for a day. Upon my return, and a quick poke through the holes, I could feel it was rock hard. Re-inserted the 4 screws, managed to tighten them up meaning job done ! Stuff is great. Saved me a load of hassle. This was done back in September, door is still in place :) Worked form me and holds a worthy place in my toolbox. Cheers

Very good.

Dried very quickly so you do need to be quick, completely solid once set, not brittle like epoxy.Did the job I had to do brilliantly

Works but it's too thick so not suitable for what I needed it for. I used it but the leak did not stop and then I realised that it was a hairline Crack in the pipe. Bought another similar product which was more liquid than this and that did the job.