Dishwasher Door Seal Compatible with Frigidaire Gallery Kenmore Sears Electrolux, 154827601 Dishwasher Door Seal, 809006501 Bottom Door Gasket,154701001 Splash Shield

Arrived a couple days early! Black door gasket went in easily. A video showed to mark the center of the new gasket and then start at the top middle and work your way down on each side trimming excess at the end. Take note of small white "splash guard" at bottom corners.Door gasket (white flat) was a little tricky to get started into a groove you can't see. But feel around the bottom of door and start on right side and it will lock in place.Easy fix saved a very expensive repair if you brought someone in.Many helpful videos on YouTube.

Worried some about the fact this wasn’t OEM but since I was ready to junk the dishwasher & didn’t want to spend lots of $$ fixing it (its installed in a rental) this was worth a try. Door wouldn’t latch unless I pushed REALLY hard on it, and it leaked from both sides at bottom. Received the parts, installed them in no time flat after watching multiple videos on-line, door closed very easily, ran a rinse cycle, no leak! Very happy.

Seal fits but it takes awhile for it to form to the door. You’ll have to push hard to get the door to close securely for awhile.

Perfect fit and fixed our leaking dishwasher door

My dishwasher was leaking at the bottom. The lower seal helped, but I did have to cut the placement notch a little to the left as the left side of the seal was about 1/16th inch into the tub side. Based on what I am seeing, it might still leak a little. I think that is partly a Frigidaire design issue, but also the lower seal is not straight. Hopefully, that will improve with use. No issues so far with the tub seal, but I'm going to keep a close eye on it due to the other review showing a leak. My dishwasher did not have the splash shields, but I installed them anyway. I'll update if any issues encountered.*** Update: tub seal is too narrow. The dishwasher leaked in several places. The lower shield still fine. ***

Bought this for a Frigidaire dishwasher. It has a small hole on the bottom clear gasket that still allows water to go through. This doesn't work well for any dishwasher with an orbital arm in the bottom. The orbital arm is high pressure and forces water out of the hole.

Fixed my leaky dishwasher door. Only tool required is something to cut it to length.

I had a leak on my dishwasher and was thinking I needed to replace the dishwasher. After looking at what the cause could be, I realized that the seal and the small piece at the bottom needed to be replaced. Looking for the seal, I found this kit with everything I needed to replace all the seal components. I replaced all of them and my problem was solved. Only thing I would have liked to have, was the middle mark that the video said so I know where to start. But no problem, it was long enough, and I cut the excess at the bottom. This cost me so much less money than what the appliance part store wanted for just the seal, no other parts. Very happy I found this and my problem is solved.