LANSCOERY Acrylic Display Case with LED Light, Clear 5 Tier Organization, Dustproof White Display Box, Exclusive Showcase for Collectibles, Mini Figures and Funko Pop, 11.8x11x11.8inch

Disappointingly, of the two units I purchased, one arrived with an acrylic panel that was cracked, as if something heavy had been dropped point first onto the box. Since the damaged piece was the back panel, however, I decided that it didn't matter, and assembled my units anyway.I bought two of the 15 inch long units, planning on stacking them on top of each other. After I assembled them, I realized that I could remove the bottom board from the top unit and make them into a single, two storied unit, which worked beautifully. I highly recommend doing this if you plan on using more than one unit together. It's classy and secure!Now, first off, several people have left reviews stating that the holes in the wooden parts for the acrylic sheet tabs were too small, requiring them to widen them. I think that they failed to understand that the tightness of those holes is *intentional*. You don't want the tabs to drop in easily and rattle around. The tight fit keeps the unit more stable and secure. And it isn't difficult to get the tabs into those holes, even thought I did NOT receive the mallet that is shown in both listing and in the parts list that comes with the display case. The heel of my hand was plenty enough force to tap the pieces together, and as long as you are paying attention, and line things up so that you are only ever applying direct *downward* force without any angle to it, you really run no risk at all of "snapping off the tabs" like other people have complained.Seriously, the hardest part about this assembly was removing all of the film from all of the acrylic pieces before assembly! And they supply a tool to even help you do that!Fully assembled, the swinging doors were a little tight to close, needing me to flex the plexi a little to get them secured, but, honestly, that isn't really a complaint. That tightness keeps the doors from swinging open on their own, so I like it. My only *real* complaint is that the acrylic/plexi used is a little... soft. When loading up your case, don't let your items rub against them, because if they are made out of anything that is stronger, they will scratch the acrylic. A slightly higher quality plexi would fix that, but I think that would affect the price-point too much.The only things I would change at all about these units is that I wish the LEDs were COOL white, rather than warm, and I'll be looking into swapping them out, and I wish that for the swinging door types, that there was a hole drilled on BOTH sides so that I could choose which way the doors swing open. IF I end up completely re-doing all of the lighting in this unit, then that's a simple thing to do, by just flipping the wooden top and bottom around. That only works, though, if you don't plan on using the integrated lighting, otherwise, you're stuck with the hinge being on the left and opening from right to left.Overall, given the tightness of the fit of all the pieces when properly assembled, this unit is MUCH more sturdy and stable than I anticipated, and looks very nice. All of the included tools to help you with assembly - from white gloves, to film removal tool, to even a microfiber cleaning cloth! - really show the attention to detail for such an inexpensive piece. And the risers are better than shown in the videos, too, with extra cross-braces to make sure that your shelves don't sag!If you are on the fence about trying one of these out, then I recommend you give them a shot. They come in such a great variety of sizes, and are easy to assemble and look very nice, whether you're displaying toys, fine art, or anything in between.

This display case is actually quite sturdy once assembled, it's easy to move. It really shows off our collection well with the light. We've ordered a second one for the rest of the rocks.However - getting the plastic off the acrylic was not easy. For the light, we tried for a half hour then gave up.I wrote to the seller who told me: "The product is now available without the protective film on the top light. This is for the convenience of the customer." The instructions don't mention this at all, they say you have to peel the film from the light. You don't anymore.

The media could not be loaded. Overall, for the look, I would give this 100%. However, the quality isn’t really that good for the price. I spent $97 with a little discount for the promotion that is going on at the moment. The total price after tax is under $100. The acrylic is flimsy. The door doesn’t fit right. And you can see in my video it is hard for you to open and close the door. I have to lift the bottom up a little bit in order for it to fit right in. The panels are about 2 mm thick is bendable and can get scratched up easily. The light is positioned at a point that it can illuminate everything inside, which is nice very aesthetically pleasing.It can hold a lot. I’m ordering the large side with 6 rows and each row will hold about 6 to 7 figures depending on how closely you want them to stand together.Assembly is easy… the instruction is useless, but you probably won’t need it to put this together. The most painful part is removing the plastic wrap. They include a little tool which I did not realize until halfway done. So learn from my mistake look for that little round thing it will help you get removed the plastic wrap so much faster.

This display case is so beautiful! It is compact and holds a collection of small figurines that my parents collected. The light feature is a lovely addition. Great quality & value. Easy to assemble and to open and close.

The plastic is not sturdy, and the doors don't fit correctly. I had four adults trying to make them fit correctly. When they discovered how much I paid, they were shocked. It isn't worth the money nor did it appear as sturdy as the photo. The doors don't have a stopper to keep them from moving inward. The sides are not attached by anything other than the top and the bottom piece of wood. If the top or bottom comes off, the complete structure will collapse. Look closely at the handles. They are just holes in the plastic. I would take it back, but it is large and a lot of trouble to assemble.

Contrary to a lot of other reviews, I think this was pretty easy to put together. It looks good and it feels pretty stable. The holes to fit the acrylic pieces into the wood may seem too small at first, but you actually just have to press down pretty hard for the pieces to slot in. The tight fit makes it less likely to fall apart. Also I saw some reviews say the hole for the door was on the wrong side, but they just needed to flip the bottom over. The door is meant to open from the right and the holes should be on the left. It’s also easy to peel the protective film off if you use the little disk they give you to scrape up the edge. I would definitely recommend this case and I plan on buying another in the future.

Pros- simple look, nice lighting.Cons- cheaply made. You will not be able to move without it falling apart. You will need to glue connections. Takes about 30 minutes to put together. Frustratingly time consuming pulling protective film off of parts. Not sturdy at all. I’m giving it 2 stars because I’m going to use it. I will be super gluing connections so it will stay together if I need to move it. I’m just shocked at how cheaply made product is. I think someone made this in their garage. Don’t waste your money.

El producto llegó medio abierto, al momento de revisar las partes una de las "patitas" de la puerta estaba rota, la pude pegar pero ya quedó sensible por lo pequeño de la patita.La barra de luz de la parte superior de la vitrina se despegó al poco tiempo, el pegamento que usa el fabricante es de mala calidad.En resumen es barata, y por tanto de mala calidad, mejor inviertan en otra vitrina para sus figuras.

It is very easy to put together while maintaining very good protection on the plastic walls and surfaces. I have two of them. Highly recommended.

Parecía bonita e incluso compre otra. Pero poco después del mes dejó de encender la luz. Habra durado 10 minutos en total con luz. Pésimas compras.

This display box looks nice from far away . It is flimsy and will not hold together well on its own . The part that holds the door on broke as soon as I opened the door once . I need a few display box’s . This will not be the one I use

Taking the adhesive paper off each panel was very time consuming. The final product is good however.