BrowningBR1015-UHF Fully Enclosed NMO Hole Mount with Preinstalled UHF Male PL-259 Connector

Quick shipping and easy to install .

Sealed up well and seems to be of good quality. I like the waterproof connection underneath the nmo connector. Did an install in my SUV and I swap around between an EM Wave MX0450 and a COMET SS-680SBNMO and both are performing great!

I wouldn't cheap out when it comes to NMO mounts. The last thing you want is a leak in your vehicle or to ruin the paint on your vehicle. This NMO mount works great for me, and I'd highly recommend it. I would also recommend that you buy some silicone grease so that it helps insure a waterproof seal around the O-ring.

Seems to work well, thought when first installed, out of three, only one was "plug and play". The other two I couldn't get a cover or antenna to screw onto the mount. At first, I was a little displeased, but then I decided to sand the threads down a little using plumbers sanding paper (or whatever it is called). After taking off an unmeasurable small amount of thread depth, every cap or antenna I tried worked. Might have been a bad batch of nuts. Overall, pleased, especially with the cost and the easy fix to what I would call nothing more than a minor inconvenience.

I’ve had to replace multiple NMO ends due to being out in the weather. This one is 100% sealed up and should last forever.

I like this mount. I've installed many Larsen NMO mounts. This is my first Tram/Browning mount. It was easier to hold centered in the hole while tightening. The coax is well shielded, yet very flexible. The weatherproofing where the coax attaches seems pretty good. The threads where the antenna attaches are easier to get aligned with the threads in the antenna (using a Laird antenna at the moment).

I purchased 2 or 3 other Amazon NMO mounts, the quality just wasn’t there. This one is nice, definitely worth a few dollars more.It arrived with the cable coiled nicely, instead of bunched up tightly like the other cheap ones. This is much better for the cable and doesn’t leave kinks in it once it is laid out. The PL-259 connector has a very nice plastic strain relief on it.The mount itself has a much better “feel” to it than others, it has a little bit of weight. The soldered connection is covered securely.Highly recommend this mount.

Install is straightforward. Pull down the headliner, punch a 3/4” hole in the roof with a good hole saw, rub a little silicone on the o-ring. Then fish the cable in through the hole. You need a 15/16” wrench to tighten it. (Or a large Cresent hammer). Immediately after installing, I attached the antenna, and drove through a car wash. No leaks. I’m satisfied.

The cable arrived within 24Hrs of ordering and was exactly as advertised. 17 feet long and a PL259 connector on one end with an NMO on the other.Don't forget to unscrew the brass collar from the NMO to mount it on the vehicle bracket. Installation in my F150 was a synch and the cable is sufficiently pliable that I wasn't concerned too much about bent radius.For the money I paid, this is a no brainer to buy.

For an inexpensive choice, this cable appears well made and was super easy to install. I had no connection issues with any of my Larsen antennas. The connector for the radio is soldered and moulded onto the end of the cable with a strain relief. If you need to route the cable through tight areas in your vehicle this will be an issue. The simple fix of course is to simply cut the connector off and solder on a replacement after you route the cable. Overall, a 5 star thumbs up for a simple mobile application.

came in a timely manner and seems of decent quality

Comes as a complete unit, just add antenna. So far so good.

I bout this for my truck, I bought the appropriate antena for it as well, only problem is it did not come with anything to mount the antena to the truck. Does anyone know what or where I can get a universal mounting bracket for the antena ? I'm looking for one that can clamp onto the side of my hood on a 2019 Ram 1500. I called customer service and they apologized but could not point me in the right direction. They did give me a small discount and wished me luck on finding a solution. Any help muchly appreciated.