MakerShotMagazine Speed Loader, Compatible with .45 ACP - Springfield XDS

I happened to get a universal one for my birthday and the so called “custom” one for Father’s Day and there is NO DIFFERENCE except the $3 extra for the one you choose a specific magazine. It works but 1 star for deception.

Your browser does not support HTML5 video. FIVE STARS I bought the Taurus PT111 Millennium G2 9mm and I love the handgun. But the magazines are hard for me to load by hand. I looked online and found this speedloader and decided that for $12.99 (shipping and all) I could hardly go wrong.It was very easy to use. I have two magazines and can load both in less than 1.5 minutes. No more sore fingers for me.Great product! I love it!!I've included a short video. The sound isn't so great, but it gets the point across.

The description claims these are fine tuned and designed for the specific firearm model. This is not true. You will receive a generic speed loader, in this case size B (Pics). The size is molded on the back ledge of the speed loader. They do not show this area in any of their pictures. However you can see this size in the customer pictures of allegedly different models that also have the B size, such as the SCCY CPX-1 / CPX-2 model.I would have given this a higher rating if it were to actually fit the Sig 365 magazines specifically as advertised. This size B model has a sloppy fit resulting in the internal ammunition depression column catching on the feed lips from time to time as it has side to side play (Pics). Also that same column is too thick, not allowing the rim of the ammunition to catch under the feed lips causing it to pop out again for some ammo and barely holding on for others (Pics).Don't waste your time with this generic model and find something made for the Sig 365.

If your hand size is that of a small child, and you have the strength of King Kong, it might work for you- but I wouldn't bet on it. Worst design, and execution, of a good idea. They should have paid royalties to Glock, for the loaders included with their weapon's purchases. It was marginally acceptable, but today, The Best, is the UpLULA. Period. These are absolutely worthless... Returning it, with hopes nobody else get's snookered...I fiddle around with the full size UpLULA, and have no problems. If there were an AMAZON WORST, this would be a very sincere candidate...Zero of Five Stars. Do not recommend in any way, shape, or form...

At first I found this to be somewhat awkward to use... But then I learned how to use it.The key is to slide the round in as far as you can (it bottoms out on the MakerShot plastic). As soon as the round stops, slide the MakerShot upward until the plastic clears the back of the round. A simple push with the thumb will seat the round fully into the clip and the process can be repeated for the next round. Once the moves are learned, reloading is an easy task.

I have rheumatoid arthritis in my hands and this makes loading the magazines so much easier. I can use in one hand and push down with the thumb. It also works good to set the magazine upright on a flat surface with this on the top and then push down. With my limited hand strength, I can only load one or two rounds with just my hands. I shot over 140 rounds yesterday with two magazines and loaded them all myself.Granted, if I was having a flare-up with my RA, I don't think I could use this... But I'm also not able to put socks on when that happens. Using this device did not trigger a flare-up, so I would definitely recommend this to anyone to try.

Just finished loading 30 rds of Armscor 22mag 40gr jacketed hollow points for 5th time into my PMR/CMR 30 magazine using the MAKERSHOT Custom Kel-Tec PMR Loader. All while sitting reclined in my EasyBoy, watching TWD marathon while waiting for my team's Big10 game to start.I've attached pictures to show NO DENTED Cartridges, or bent magazine lips so I have no Idea how these 1 star reviewers accomplished such self "operator errors" but it definitely was NOT from the function of the MAKERSHOT loader. Perhaps since I'm a Professionally trained Gunsmith as well as Certified Appraiser. But I do know how to follow the PMR/CMR 30 operator instructions regarding 1. Seating loads per 5rds2. Official ammo to use3. Only Official Kel-Tec brand magazines.No knock off magazines, no off brand cheap or reload ammo and no sloppy loading techniques.My advice is to ignore the one/two star reviews of this product. This is a quality product at a GOOD value that will help you in loading your PMR/CMR 30 magazines.

The Makershot custom speedloader for the Shield 9mm is simple, light, compact, and will easily fit in a shirt or pants pocket. It has no moving parts. It fits both 7 and 8 round mags. It slides over a mag and allows the user to depress the follower and slip a round into the mag just enough to catch the mag's feed lips. With the round partly inserted into the mag the user then slightly lifts the speed loader and finishes inserting the round. This action is repeated until the mag is full. Like most things, it gets easier with practice.So why only three stars? Two problems.... With work arounds.When loading the first round into the mag the speed loader has the tendency to cause the follower to rotate and jam inside the mag. The reason for this is the speedloader just catches the edge of follower and encourages it to rotate instead of depress. This problem can be avoided by manually inserting the first round.The second problem is when slightly raising the speed loader to finish inserting the round into the mag the round can occasionally pop out of the mag with some force. This can be avoided by using a finger to keep some pressure on the round. I also suspect the instances of this occurring will reduce with practice.So in summary, it is better than no speed loader, but not as easily to use as the slightly more complex and more expensive Maglula UPLULA. I plan to keep my MAKERSHOT speedloader in my range bag as a backup.

Premetto che ne ho comperate due tipi mi spiego:Il primo speedloader per una 1911 Kimber con caricatore monofilare è perfetto in quanto originale di fabbrica per tale modello.Il secondo speedloader per un caricatore bifilare glock 30 cal. 45 è stato chiaramente realizzato con una stampante 3D e i residui del prodotto plastico usato per la realizzazione di tale oggetto danno fastidio nella fase finale al caricamento rimanendo lo Speedloader incastrato nel caricatore e non va affatto per cui uno è utile il secondo affatto.Premetto che fossi più interessato a quest’ultimo che al primo in quanto caricare gli ultimi due proiettili cal 45 su una bifilare glock non è semplice peccato.Consegna Amazon comunque precisa e puntuale

Der Speedloader funktioniert einwandfrei, vor allem mit Walther PPQ-Magazinen. Bei der HK SFP9 schien es etwas unrunder zu laufen, das kann aber auch an meiner mangelnden Erfahrung damit liegen. Auf jeden Fall ist ein solcher Speedloader sehr hilfreich, wenn man einen langen Schießtag vor sich hat und aufgeschrubbelte Daumen vermeiden möchte. So leicht habe ich Magazine wirklich noch nie geladen (außer mit einem Laderahmen aus Holz für's G3 :-) ).

considerato il prezzo avevo aspettative pari allo 0 virgola ed invece mi sono dovuto ricredere... è perfetto per la mia steyr e considerato il costo si è rivelato un vero affare. la plastica è molto spessaunico neo la spedizione un pò lunga (circa 1 mese) perchè arriva direttamente dagli Stati Uniti.

Ben costruito di piccole dimensioni per un utilizzo comodo. Funziona alla perfezione. La plastica usata è di qualità e si nota immediatamente. A questo prezzo non si può pretendere davvero nulla di più!!!

Defiantly a good fit for the S&W, M&P 9mm. I bought it by mistake thinking it would fit the S&W SD9VE 9mm, being that a few items do work for both like the BlackHawk holster. I was wrong and contacted the seller, which in turn reimbursed me for the item. I did loose out on the shipping but hey, no problem. I'll have to keep looking.