CGOLDENWALL 300g Electric Grain Mill Grinder Safety Upgraded Spice Grinder Pulverizer Stainless Steel Machine for Dry Spices Herbs Grains Coffee Seeds Rice Corn Pepper 110V

This seller had the above and beyond customer support! I honestly couldn’t thank this seller enough for being so so patient and responding so quickly. Maybe I received a bad product the first time I’m not too sure but the second one was phenomenal! So I just want to say thank you so much for making things right, and again for being so patient with my response and still falling through with what was mentioned! Thank you!

This grinder does just what I need it to do. I purchased the upright 300g capacity grinder. After reading and following instructions, the machine grinded the rice like flour (see pictures). I used my thumb to push both screws all the way back (to make sure they were touching the conductor). Otherwise, it will not turn on. It is noisy (sounds like a blender or handheld mixer). The instructions state that you may experience an odor during the first use and to clean the machine with rice before use. I had some expired rice in the pantry that I used to clean it with; however, I didn’t smell any odor. Asked my daughter- she didn’t smell anything neither. I don’t like the 5-10 minutes cool down between each use, but it is needed to prevent overheating. Moreover, it does exactly what I need it to do. It arrived 3 days earlier than expected.

This machine has no start button, you twist the timer and machine starts immediately... On timer scale, number means minute, small gaps on scale each represents 10 secs, and any below 1 min has no scale and you have to measure either by look(and my timer "off" score is slightly off toward the "5" min side) or by counting yourself and unplug the power( I don't want to twist the timer because this timer is mechanical like the ones in pre-digital era oven). If you worry about unplugging, plug it on power strip, and now you have a grinder with on/off button!For lid, you have to rotate both lockup screws each time you open it, I suggest you to spend time trying out yourself, you can even completely unscrew it...don't do that. After experiment I realize it's just a weird size nut. So each time when I try to secure the lid I simply tight up both screw until it almost reach the top, then rotate the lid to close, push those 2 nuts in with your own finger and rotate the lock handle( if nuts are too tight you will have hard time to lock it, release a few degree when you do). As for rotation direction... Try it out since YOU WILL FORGET IT, if you have good eyes like me you can see the screw score direction.Update 2/06/2022Do not grind peanuts, I grind less than 5 sec at first, then less than 9 sec, when I opened up the lid, the button peanut already become peanut butters... no matter what your family told you, don't do it.

grind up grains and amendmentsbetter than VIVOR ,it has better documentation ,2 not one set of blades and the tool to change them.. I owned one liked it so much I bought a cheaper VIVOR one . returned it it was not made as well with only one safety (NBD)

The grinder is a safe machine and easy to use. We have bought five of these grinders for our metallurgical labs to homogenize and size reduction of various minerals. They work great for this purpose and saved us a lot of money instead of buying expensive pulverizing equipment. The blades have to be replaced often for hard minerals like silica and supplier has been very cooperative in supplying additional blades at their cost. I would not hesitate buying more grinders as we keep them separate for each minerals we grind to avoid contamination. These will certainly work great for grinding spices.

Update: (Review changed to 3 stars for now, will update on the next one.) After emailing back and forth with the company, they easily agreed that I did everything I could have to troubleshoot and that the materials I was trying to grind was within the products capabilities, I must have received a defective product, it happens. They agreed to send me a replacement grinder, which has already shipped and should be here tomorrow. Very fast customer service. As long as the one I receive works, I'll be happy.--Original review: (1 star) I bought this item for a business I'm starting where I need dried peppers (think like jalapenos) ground down into a fine powder. I received it today and put it to use a few hours later.In the manual it states that sparks and funny smells are normal at first but to keep using it and that will go away eventually. Ok, so right away it starts sparking and smelling burnt and smoke is coming out of it. I only used it for 30 seconds and dehydrated jalapenos aren't a big ask for a machine that purports to help able to grind actual pearls and ginseng. I let it sit for about 5 minutes while I read over the manual again to make sure it was ok that it was doing that. After being assured again by the manual, I started it for another 30 seconds. More smoke and sparks and bad smell. I had to open all the windows and turn on the fan above the stove. Then the little safety switch popped up.I haven't been able to get it to turn on fully since then. I go to start it and you can hear it start to spool up for 1 second maybe and then the safety switch pops and it winds back down. I have tried everything in the manual (replacing the brushes, making sure the lid is secure, making sure the blades aren't stuck, proper outlet, etc.) and nothing will make it work properly again. The machine was not overheated not did I run the motor too long nor were the contents of the tank too difficult or overfilled.When my boyfriend went to open the lid (with both hands) to help me troubleshoot, it electrocuted him. It was pretty scary and now I'm almost too freaked out to even use this. It's sitting unplugged on my counter because I'm tired of even dealing with it right now. Not what I expected from all the great reviews. I have been looking around for months for a good one of these for my business and this is what I get. Disappointed and frustrated and unable to do my work.I have emailed support using the email from the papers that came in the box. I'll update once we see what the outcome is of that. I hope it can be resolved without me having to pay a ton of money in shipping or some other nightmare scenario you hear about from other overseas sellers.