Maxpower330100 16-Inch Universal Power Rake/Dethatcher Lawn Mower Blade

This dethatching blade worked exactly the way I hoped it would. I had an area of my yard that was looking sparse and clumpy, and I wanted to get rid of matted leaves, thatch, dead weeds, and other stuff that was clogging up the ground and keeping the grass from filling in. I had to modify this a little to fit my LawnBoy Gold Pro 1997 mower. The drive shaft fit with one of the included washers, but the slots on the sides of it were a little too narrow for the tabs to engage, so I enlarged them in the proper spots with a dremel and grinding stone. It was quick, easy, and effective. For most mowers, this probably won't be necessary.Assembly was a little difficult in that the loops in the springs where you install the mounting bolts didn't line up perfectly, and the bolts were too short to get the nuts on. I fixed that by compressing them with a pair of pliers while I started the nuts. From there, it was very easy. Check to make sure you install them so that they're trailing the blade part when the blade is installed. I did it backwards the first time and had to take them off and redo it.I used this on an area of my yard about 500 sq. ft. to try it out. In followed the instructions and set the blade height so that the tips of the springs were just about at ground level (on concrete). I pushed the mower at a moderately quick speed and was thrilled to see it leaving trails of thatch and dead junk behind as I passed over an area. As other reviews may state, don't stop unless you tilt the mower up a little to lift the springs out of the ground, or you'll tear the heck out of a circular area. It did take out quite a bit of grass as well, leaving that part of the yard looking thin and terrible.I started to rake up the thatch and debris, thought better of it, installed my regular blade and bagging attachment, and went back over the area. The bagger picked up everything. This blade won't work with the bagger because there is no angle to the metal, so you need your normal or high-lift blade to do that. Made very quick work of the cleanup, though I had to empty the bagger frequently.What I really wish I had done was take pictures before, immediately after dethatching, and a couple months after overseeding the area. It looked bad initially, REALLY bad after dethatching, and now it is by far the best looking area of my yard. The overseeding helped fill in areas that were bare to begin with, but the major thing that happened was my Kentucky Bluegrass spread out to fill in most of the bare spots. It is amazing the transformation that this part of my yard has seen as a result of this treatment, and I plan to do the rest of my yard this fall.The only thing I would warn about is to look out for weeds taking over the newly exposed bare soil. Maybe hit it with a broadleaf killer a couple weeks after reseeding. I ended up having to pull a lot of mature weeds by hand because I failed to do this, but now there are almost none there, and it is all lush, green grass.I would very much recommend this blade. I did consider deducting one star because the assembly and instructions left a little to be desired, but in the end, it did such a good job so easily and for so little money, how could I really find any fault?

When it comes to lawn care, finding the right tools can make all the difference between a decently maintained yard and a stunning outdoor space. The Maxpower 330100B 16" Universal Power Rake/Dethatcher Lawn Mower Blade falls into the latter category, transforming your lawn care routine with its efficiency and ease of use.Installation: A BreezeOne of the aspects that immediately stood out to me was how easy it was to install the Maxpower 330100B blade onto my lawn mower. Even for someone who isn't particularly handy, the process was straightforward and quick. This ease of installation means less time fiddling with tools and more time getting the job done.Performance: Beyond ExpectationsFrom the first use, the effectiveness of this dethatching blade was evident. It tackled my yard with ease, removing thatch and promoting healthier lawn growth without damaging the grass. The blade's design seems to strike the perfect balance between being tough on debris and gentle on the lawn itself. It's satisfying to watch as the lawn begins to look more vibrant and healthy after just a couple of uses.The blade's universal fit is another significant advantage. It’s designed to work with most 16" lawnmowers, which adds to its versatility. This feature alone makes it a valuable addition to a homeowner's lawn care arsenal, especially if you own or plan to use different mowers over time.Durability: Built to LastAfter several uses, the Maxpower 330100B blade has shown no signs of wear and tear. It's crafted from quality materials that feel robust and durable. This is a tool built to last, even with regular use, which is exactly what you want when investing in lawn care equipment.Social Proof: The Talk of the NeighborhoodMy positive experience with this dethatching blade didn’t go unnoticed. After seeing the results in my own yard, several neighbors have been eager to borrow the Maxpower 330100B blade for their lawns. It's become somewhat of a neighborhood sensation, proving its effectiveness beyond just my initial impressions.Final ThoughtsThe Maxpower 330100B 16" Universal Power Rake/Dethatcher Lawn Mower Blade is a game-changer for anyone looking to maintain a beautiful, healthy lawn with minimal effort. Its easy installation, impressive performance, and robust construction make it a top recommendation for both novice and seasoned gardeners alike. If you’re in the market for a reliable dethatching solution, this blade should definitely be on your radar.

Works good, it is a bit short.

This is NOT universal. In fact, most mowers have a fitting that has a shape to it so that the blade moves properly. This blade has a circle fitting and really did a number on my blade fitting and also bent the blade itself. My fault, I thought it would work and didn't understand that the blade has to fit snug. Just wanted to warn others. Most mowers are going to be compatible with the Arnold thatching blade.

Grubs wiped out about 2/3rds of my bluegrass yard this year. I always put down grub killer as I've ran across this problem more times than I want to remember. They don't chomp on the next door neighbors fescue, they want bluegrass! The bag said it would be effective for 3 months controlling the little devils; wrong! I didn't get up the ambition to spread grub killer 3 times like I have in the past and my yard paid the price. Was hoping the dethatcher would rip the thatch from the dead spots and stir up the ground for new seed. It did rip up the dead grass, but only at ground level. Didn't stir up the soil at all. I ended up renting an over seeder. The bright spot is that the blade lifted the dead grass and left a patch of thatch that was good to hold moisture while new grass seed germinated. Overall I'm please with the results. I'll keep the blade around just in case, but hoping I'll never need to use it again. Recommended if you're looking for same results I got.

I pre-cut my yard one inch lower than normal at 2”. Then installed the dethatching blade. I made one pass with my mower set at 2” and nothing happened. I moved it down to 1.5 and the “blade” torn the grass blades but the tines just barely touched any thatch.This does way more harm than good to the lawn at least on cool season grasses.

Did about 3,000 sqft with little wear on tines. My older B&S mower could just handle it. Obviously some thick thatch might be a slow push or a more powerful mower would help.

Lo uso para quitar todo el pasto muerto de mi jardín. A primera vista destroza el jardín pero en poco tiempo sale un pasto saludable.

Was not to sure about it at first, but after seeing the youtube video on how to install and use it. It works just fine, it did a very good job of removing the moss from my lawn.

All good

I was worried about the fit on my Honda lawnmower. No problem. It jut mounts with the two side bolts. I didn't have to worry about the size of the centre hole at all, as the centre bolt stayed on the mower. Got lots of spare washers now. I tried it out with the springs just touching the driveway. On the uneven grass there was some tearing out of the grass as well as the moss. But I am going to over-seed and some scaring of the lawn but that will probably be an advantage.