Niooliuk 10 Meters 33ft K Type Mini-Connector Thermocouple Temperature Probe Sensor Temperature Sensing Line K Type Thermocouple Wire Measure Range -50C to +180C Celsius

My 3D printer has been having Thermal value issues and I have been working hard to figure them out. This is exactly what I needed to get the values correct according to the resistance. I found that I am 5C off on the bed so far which can make a difference when printing certain materials.At 8.99 for 33FT you are getting a sweet deal!The material is also strong and good quality.it fit in my multimeter very well with a little looseness but still did the job and took the readings accurately.10/10 for what I need10/10 for price10/10 for material and how much you are given.

See the photo comparing another thermocouple in the same air temperature to this one. This one is off by about 18 degrees F (10 C)! I confirmed the accuracy of the top reading by comparing to another calibrated thermometer that is 1 F accurate. I also confirmed that all the meter channels read about the same temperature using this probe.Beyond that, even the spades on the connector are cheap. Instead of being flat and solid, a dimple has been stamped into the terminal to expand it to the normal thickness. The plastic of the connector is not the high quality glass-filled stuff, either, it's some cheap kind of plastic.There are no explicit specifications given for the maximum temperature of the braided insulation outside the wire. I would hope that it can go to 180 C. But the product page says "Material: Metal, Plastic; Net Weight: 78g". If the insulation is plastic (it's not metal), I'd be concerned about using it at higher temperatures.All in all, not that satisfying a product.

In what reality is this an acceptable way to ever make an electrical connection? Doing this on to a Thermocouple that is by nature extremely sensitive to voltage... It's an absolute disgrace.

I love to make my handles for all the knifes I make. Now I know how hot to the degree my oven is when I’m baking them.

its a really inexpensive K Type Thermocouple. I had low expectations for it. I needed a longer thermocouple to measure a container on the other side of the room. This was worth a shot.My main issues with it are that it reads about 2C off from my more expensive thermocouples. Its more of a hobby grade product than something I'd use for reliable and accurate measurements. My other issue is that the connectors seem to be a little too short and it sometimes loses connection/signal when plugged into my meter.If you need something hobby grade, this may work for you if the connectors work in your meter.