M.2 NVMe SSD heatsink

I purchased two Western Digital 500GB WD Red SN700 NVMe SSDs for a RAID 1 setup in my QNAP TS-464 NAS, and paired them with these MHQJRH M.2 2280 SSD heatsinks. These heatsinks are an ideal match for double-sided NVMe drives like the SN700. Installation was quick and simple. The included thermal silicone pads applied easily and made good contact with the drive components on both sides. The aluminum heatsinks are thin but sturdy, and most importantly, they're slim enough to fit perfectly in the tight confines of the TS-464's M.2 slots without interfering with anything else. Temperatures remain stable even under moderate load, and I’m confident the heatsinks are helping maintain long-term reliability. If you’re using WD Red SN700s (or any other double-sided NVMe SSD) in a QNAP NAS or small form factor system, these heatsinks are a great value and a smart upgrade. Highly recommended.

I have two 2280 size M.2 NVMe SSDs in my new build and wanted to put heatsinks on them to, A. Help them live and perform as well as possible and, B. dress them up a bit and give them a finished look for my build. I chose these because they were inexpensive, appeared to be decently made, and had the right look for what I wanted. After receiving and installing them, I am so impressed by the superior quality and finish of these heatsinks that I'm writing this review of them, something I rarely ever do on Amazon. The heatsinks arrived in a very neat, high quality box a little bigger than a CD case with two clear adhesive seals, as per typical. The box included some warranty and instructional paperwork (printed in english) the two piece heatsink, three silicone thermal pads (one spare), a little ziplock bag with the six screws needed to assemble the heatsink (there were actually seven, a spare was included here too), and a little phillips head screwdriver for the screws. The inclusion of the screwdriver was a really nice touch, as the screws are quite small and many people may not have a driver small enough - I didn't and I have a pretty comprehensive set of tools so this was a lifesaver really. All of these items were neatly arranged into a perfectly cut, dense foam rubber insert in the box. The packaging gives the impression that this is some kind of delicate and expensive photographic instrument or something, not a little $12 M.2 heatsink, but that's the kind of quality were talking about here. No blow molded PTFE packaging here, the way my DDR4 RAM sticks and other, much more expensive components were packaged. I digress. The heatsink is a two piece, black anodized aluminum 'sandwich', the top half is clearly machined from aluminum billet, the bottom is thin metal so probably just watercut or punched, but was still nicely finished and anodized black and had white manufacturer printing on the bottom. Even this rather insignificant detail, which you will never see once this is installed, is of high quality and nicely done. The M.2 drive fits (obviously) in between these two pieces with a silicone thermal pad on each side. The pads not only facilitate heat conduction from the drive to the heatsink (as per usual) but also compensate nicely for any slight variations in thickness of 2280 length M.2 drives from different brands. The tolerances, machining quality and finishing of the heatsink parts is, as expected by now, superb and my two drives, one a Samsung and one Crucial, which were not precisely identical in thickness, mounted perfectly and very snugly into the heatsinks and looks very "OEM" and proper with these installed. I don't want to give the impression from all this that these are fancy or elaborate in any way, because they're not. There's no RGB, no visible nameplates, or any other extraneous bells and whistles, they are just simple and beautifully made and are a very nice aesthetic touch to your build, in addition their functional nature of helping dissipate any excess heat from M.2 drives, which I'm sure isn't vital to their operation or they'd all have them already installed. Many of these drives are sold with the brand's heatsinks installed (think mainstream "gaming" RAM sticks) and from what I've seen, most M.2s with heatsinks sell for $50 to $75, or even more, over ones without. There are quite a few different designs, finishes and colors of these aftermarket M.2 heatsinks available at varying price points, some getting up there a bit. In my opinion, you could probably find something equal or pretty close to equal in quality and finish to these, but I highly doubt you'd find anything significantly better at any price. These only cost $12, making it a no-brainer for me, especially over paying the additional $50 or more premium for a preinstalled HS from the SSD brand. I put a lot of thought and care into my builds, both in performance and aesthetics and little details like these are a big part of having a nice polished look and optimal performance in my gaming PCs. If you have M.2 drives in your gaming PC, or intend to install these - they really are great and very fast - and you don't wanna pay and arm and a leg for one with preinstalled heatsinks, you should definitely consider one of these Yateng Chinese made models, you could hardly do better and the price is right.

Very nice quality. Drive fits great, extra insulating strip, hardware and screwdriver included; what more can you ask for? Okay, I wish they had some sexy color available, but black works for me, too. Included instructions are great and there is a video available from the manufacturer here on the sales site. Easy to assemble and install; 5 minutes if you take your time. Great product, and affordable.

I bought this heatsink to improve the cooling of my PC and it works great. It fits perfectly and is easy to install. Since using it, my system runs much cooler even under heavy load, and the fan stays very quiet. The build quality feels solid and durable. It really helps prevent overheating and improves overall performance. Highly recommend if you need efficient cooling for your computer.

My SSD was hitting 160 F and was throttling to keep the temperature down. After installation of the heat sink, the temperature was 135 F so the cooling was > 25 F in my case. The SSD should last longer and perform better now. The quality of the heat sink is high. The fit and finish is excellent. Everything fit together well. One concern is that there is no spring to maintain pressure to ensure good contact with the heat sink. Contact pressure relies on the screws not allowing the heat sink to separate, so occasional monitoring of the temperature is a good idea. Time will tell if this is needed or not. The kit comes with one extra silicone pad and one extra screw. The screw driver doesn't seem to be magnetic, which would have helped with the installation. The instructions could have been a little clearer, but there are videos if you have difficulty determing exactly how to install it.

This saved my ssd and my PS5. I was having issues with my PS5 crashing and repairing the memory every time I would put the system into rest mode. I initially just pulled out the ssd think it was faulty. I gave this heat sink a try and now I have no more crashes. The install was super easy and quick. The fit was perfect, and the performance has been a savior.

- High quality build - Good cooling performance - Fits PS5 - Suitable for NVMEs with chips on one or both sides, cools both sides - Comes with 3 thermal pads - Screw included - Super easy to install I will definitely buy again.

ممتاز 👍🏻

Rien à dire, produit correct avec des dimensions exactes pour les SSD NVME.

Pese ha tardar en llegar, es buenísimo he conseguido bajar masomenos 20° la temperatura de mi SSD, de unos 68 a 42.

Esta muy bueno este disipador de calor, se lo puse a la SSD que le instale a la PS5 y funciona muy bien, ya no aparece a mitad del juego que cierres la aplicación porque la SSD está muy caliente. Esta súper fácil de instalar, no te lleva mas de 6 minutos