CRC Evapo-Rust, Heavy-Duty Rust Remover, Reusable, Acid-Free, Non-Corrosive, ...

Had a bucket of expensive router bits that had gotten surface rust. I keep them oiled but rusted anyways. Soaked them in this stuff for a day or so and agitated a few times. They came out spotless and needed no cleaning. Rinsed, dunked in alcohol to displace water and oiled them up again for storage. Great stuff and no heavy smell.

cut the top off of an old water bottle and let it sit for 48 hours - the rust just wiped off with a paper towel. found a Gerber Multi-tool and Swiss army knife - they were in good shape, just must have been left in a wet place for over a year. Wasn't sure they'd be worth saving, they were so rusted. had to use pliers to pull out blade on knife - and the file on the multi-tool was just solid red brown, couldn't really see the ridges on it. so WORTH using this product. wish had before and after photos because, personally wouldn't have believed they are the same items. They look almost brand new.

Was sceptical because of the low price. But I've been using CRC products for many years. I needed to clean my outdoor griddle that had been sitting for about a year. I cleaned the grease off first like the directions said to do. I then poured the whole bottle on to the griddle and let it set for a day . The rust came off pretty easy. I would recommend it for small jobs like this.

Tools in my home studio and garage get rusty fast, between bike parts, metal rulers, and old clamps. This rust remover has been a quiet little helper. I just pour some into a plastic tub, drop in pliers or bolts, leave them while I work on a logo project, then rinse and wipe. The first time i used it on an old adjustable wrench from my dad, the orange rust lifted off and the markings were readable again. I like that it’s water based so my studio doesn’t smell like chemicals for hours. I’ve already reused the same batch a few times and it still works well, which made me glad I didn’t have to buy a huge jug.

This stuff is like legit magic. Never seen anything like it. If I could give it 10 stars I would. Stuff that I was ready to throw away. Rusted, ceased. Not only does stuff work now you can’t even tell it was rusty. Amazing

I’ve used Evapo Rust on a handful of small projects, and it does work with some limitations. It does a good job removing light surface rust and cleaning up parts that just have minor corrosion. If you’re dealing with light rust, it’s pretty much a soak and rinse solution and it saves a lot of scrubbing time. That said, it does not perform miracles. Heavy rust or deeply pitted metal didn’t come clean for me, even after extended soaking. One big plus is that it doesn’t have a strong chemical smell like many rust removers, which makes it much more pleasant to use in a garage. I also appreciate that it’s environmentally safe and non toxic compared to harsher alternatives. Overall, it’s a good product for light duty rust removal, but not the right choice if you’re trying to restore heavily rusted or pitted metal.

Don't bother wet sanding or using steel wool, this stuff works. I did a few tests since I can't submerge this cast shaper table. I soaked a doubled up blue shop towel with it using a sponge brush and covered it with plastic wrap. This is less than 24 hrs and only wiped clean with isopropyl. It needs more work, but I'll take it as a great start. Works as advertised, would reccomend.

I found a large size Channel Lock in an old junk pile outside. It appeared so rusted that most people would not even bother. I hate to see good tools go to waste. This size tool can be expensive and also very useful. Pool filter nuts. Large plumbing nuts. So I searched for a way to clean it up. Well hoped. I read about this product CRC EVAPO-RUST Purchased it on Amazon. Little pricey than I hoped but the tool is worth much more. To my amazement it looks brand new. Couple days I let it soak. Had to turn it over because small bottle had just enough . I used a very large tin baking tray.. Like magic! Best part you can pour EVAPO-RUST back into bottle and reuse over and over. Well worth the cost. See my photos. Then I purchased a self fusion silicone tape on Amazon to wrap handles. Perfect grip. Looks awesome. Works like new. Zero grease needed.

It dies it’s Job.

I soaked some rusted drum and guitar hardware overnight and the rust virtualy disappears. Might require a tooth brush and elbow grease to finish the job, but most parts came out perfect without scrubbing. I also recommend a product called "Dry Coat Rust preventative spray" to use hand in hand with this. My process is: Soak > Scrub if required > Put items in a plastic cup > Spray with dry coat > Rotatate cup to coat > Leave on paper towel to dry. Bonus points for being reusable although it does get pretty murky after a few uses.

I have been using this product for well over a month now. As a retired auto engineer I am absolutely amazed by the performance and de rusting capabilities, considering that it is environmentally friendly. I have been using it on my rusting tool kit which I have neglected and this has brought them all back to life. I just can't praise this enough! Even deep rust that will need a 24 hour dip is treated admirably. Well done to the person who formulated this. Highly recommended.

speravo meglio...toglie un po ma.alla fine devi usare olio di gomito

El producto funciona correctamente conforme a lo indicado por el vendedor, ya que desprende fácilmente el óxido de herramientas o piezas de metal, alijas y cromados de acero. Un detalle curioso es que se puede reutilizar y funciona igual de bien en aplicaciones posteriores. La única desventaja a tomar en cuenta es que es necesario recurrir a un segundo producto para proteger las superficies donde fue aplicado para evitar que se vuelvan a oxidar.