ARCTIC Liquid Freezer III Pro 360 - AIO CPU Cooler,3 x 120 mm Water Cooling

I had thrown this baby into an ASUS prime 201 and it fit beautifully! It’s slim, sleek design and magnetic vrm cooler makes it even better. The fans do get a little noisy at 3000rpm however you don’t really need them that high. Installation was fairly easy, you just have to keep the left and right brackets a little loose. The all in one cable also came in really handy. For $80, performs way better than my nzxt lcd. You cannot complain about the price!

The ARCTIC Liquid Freezer III Pro 360 - AIO CPU Cooler is more than capable of extinguishing the Dragon fire breath from my Ryzen 9 9950x. I tried the Thermalright Phantom Spirit 120 EVO CPU Air Cooler first when I build the PC but after running the Topaz Video Upscaling AI and ComfyUI for a few days, I say that an air cooler was not going to cut it. The Liquid Freezer III gets loud when the CPU is under heavy load but when i do normal tasks it is verry quiet. It's appearance is not as fancy as an RGB one but it gets the job done. The accessories included in the box are all you need to install this AIO. The performance on this AIO is outstanding. It holds up to it's reputation. The instructions on the manual are verry clear and even a beginner PC builder would have no problem installing this AIO.

Works great and keep my cpu at a good temp, even when running demanding games like BF6, Cyberpunk and other MMO titles that I play, honestly I have all my fans arctic and the aio as well. Easy use and install, it fit great on my case and the compatible with my build. Can't go wrong with Arctic,this is my number 1 for pc parts over any other brand. Product is perfect, quality is great, installing it's products are easy for me, love the colors that I've bought and the prices for the parts are budget friendly for me. I'd recommend Arctic products to anyone. Arctic will be my personal go-to pc parts for me and I'm a PC builder. Great work Arctic!

Having tried this on 12700k, 285k, 9900x, and 9950x3d, here's my honest review.This cooler performance rocks on intel CPUs. The temps go really low and the cooler is not too loud. It does get noisy at full load, but not too loud. However, I'd not recommend this for 285k because you'll be removing the Reduced Load ILM feature of the socket when you mount it with a contact frame (removing basically doesn't guarantee the factory state if you reassemble). However, for 14th gen and below (which will need a contact frame anyways), this cooler is the best cooler I'd get all the time.For AMDs though, they still cool the CPU really well, but gets really loud. This may be the case for only the 9900x and 9950x3d I've tested, so take this with a grain of salt if you're using lower gen or different AMD CPUs. At full load, this cooler is by far the noisiest cooler I've used, making a noise like a jet engine. I won't really care too much if it was just occasionally loud at higher load, but this cooler also occasionally gets extremely loud at idle state. I suspect it's from temp spikes, and AMDs of course have a smaller surface area and denser hotspot compared to intel. I noticed that I'm not the only person experiencing this, there's a famous youtube video comparing AIO performance, and this issue is exactly replicated. The video even used three Artic LF III to mitigate defective unit possibility, but all performed exactly the same for the 9800x3d, having very high noise levels. I suspect it's something to do with the mounting frame not so secure for AMD motherboards, but this needs investigation.Aside from Intel vs AMD comparison, this cooler does offer a very straightforward cabling, you can either choose to simply plug one cable to your CPU_FAN header, and it's done. Also, the fans are pre-assembled and cleanly cable-managed which is excellent.So my final verdict would be: hands down the best cooler for intel CPUs equal or below 14th gen, cant fully recommend for AMDs. This is because the cooler performance doesn't drastically differ from others (1~2C at max), and you won't really notice the difference given the environmental factors that'll affect the most. So personally, I'd rather choose the most quiet cooler, and this LC is a bit of a mix.

Great CPU cooler. Dropped my computer’s idle temp to 32* with a maximum temp of 86* during stress test. (I have an i7-14900 that would thermal throttle at 100* during stress test with air cooling). Fans and pump on max aren’t that loud. Majority of the time it is silent. Amazing product for the price, plus no RGB lights, which is rare with pc parts and fans these days.

The ARCTIC Liquid Freezer III Pro 360 lands squarely in “gamer-approved beast mode” territory — it’s one of the strongest-performing AIOs on the market right now, especially for high‑wattage CPUs. Across multiple professional reviews, it consistently punches above its price class with standout thermals, strong fans, and clever engineering.🔥 What Makes It a Gamer’s Cooler• Top‑tier cooling performance — Reviewers repeatedly highlight its exceptional thermal performance, thanks to the thick radiator, high‑pressure P12 Pro fans, and integrated VRM fan. It excels in both noise‑normalized and max‑speed tests, keeping even the hottest CPUs in check.• Built for modern high‑end CPUs — It’s praised as one of the best coolers for chips like the Ryzen 9950X3D and high‑draw Intel processors, delivering chart‑topping results at a surprisingly reasonable price.• Gamer‑friendly design — Hidden cables, long tubing, and a clean aesthetic make it easy to build with and perfect for RGB‑leaning setups. PC Gamer calls it “the new AIO to buy.”• Quiet until you push it — At normal loads, it stays impressively quiet. At max fan speed, it gets loud — but that’s expected for a performance‑first cooler.🎮 Real‑World Gaming Experience• High FPS stability — Lower CPU temps mean fewer thermal spikes, smoother boost clocks, and more consistent frame pacing in CPU‑heavy titles.• Great for overclockers — The integrated VRM fan helps keep motherboard temps under control during long gaming or stress sessions.• No‑nonsense installation — Native offset mounting for Intel and AMD helps center the cold plate over the CPU hotspot for better heat transfer.🧊 Quick Gamer VerdictIf you’re building a high‑end rig or pushing a power‑hungry CPU, th

So for those that do not want to read the review, I'll just say it is an excellent CPU water cooler, and a must if you have a higher end CPU that likes to run hot.Now for those that want to read more, here's my review:Before I start with the details, I definitely need to stress that is imperative that you measure your case before purchasing this CPU cooler, since the manufacturer isn't lying, it requires a lot of space. That being said, if you have a case that can handle it, it works great and keeps the CPU nice and cool.Okay so on to the review. The reason I purchased the Artic Liquid Freezer 3 Pro is after building a new system with an Intel Core I9 processor, I found that the CPU cooler I purchased for it (Cooler Master 120L) wasn't really rated for such a powerful CPU, and under load the CPU temp was hitting 85c. Now 85c isn't a killer if it's just a quick spike, but when doing video encoding it was hitting and staying at that temp, which just isn't good for the CPU. So doing a little more research, I saw that Artic Liquid Freezer 3 Pro got great reviews, and was recommended for high end processors like the I9.Installing the Artic 3 Pro is extremely easy, unfortunately I built the system in a smaller full size tower case, and the new CPU cooler wouldn't fit the chassis. Luckily my secondary machine was in an even bigger chassis, and it turns out it had mounting holes and rubber grommets already there to mount the Artic 3 Pro. So after stripping the 2 systems bare and swapping all of the components, booted up the new system with the Artic 3 Pro and checked the temps, and my basic idle temp is 26-28c, a good 10 degrees lower than the idle with the old water cooler. I haven't had a chance to stress it out with some video encoding yet, but I've already noticed that the heat spikes I was seeing previously seem to be gone.So in summary, I love the new CPU water cooler! I did run across one issue that had me worried when I first booted it up, and that was that there was a constant low humming noise that seemed to be coming from the unit. I'd read a couple of other people comments saying there was a low hum, but I figured it was a one off for them. Of course I like my rigs to be as quiet as possible, and since the PC sits right under my desk I knew this was going to drive me nuts. Luckily I was able to figure out the problem, which was the tubes from the CPU to the radiator are long and stiff enough that they were touching the side panel, and the humming sound was the noise from the liquid moving and being amplified by the metal door. Fixed this issue with a few zip ties to move the tubes slightly inward so they didn't contact the door, and now the system is as quiet as can be.I hope this review has been helpful, cheers.

As noted when buying it, the radiator is larger than most. I checked and double checked it would fit in my case so that did not cause an issue, but it may be for someone else.What is not mentioned (at least I didn’t see it) is that the pump is very particular about where it sits, ant its quite low. If your board has any large heatsinks below the socket, you may have a bog problem. I have an Asus x870E-E Neo and it has a large m.2 heatsink that prevented my install.Two other things to consider is that the mounting brackets and the tubes are not super flexible.Starting with the brackets instruction video was not clear to me and I ended up trying to install the brackets upside down (The letters should be up and visible). There is an offset in the hole of the bracket so the first attempt the pump was higher and the heatsink was not in the way. But the screws would not catch because the holes were too low. This caused me to waste the thermal paste that was provided and I had to buy more and rush deliver it. I watched the install video multiple times and had to zoom i. To finally see that the brackets were wrong. This led me to find out that the pump sits too low for my motherboard.Finally the hose. I put in the radiator first (not according to the video) because as always, I don't have enough hands to try and mount the pump and make sure the radiator does not fall into my case damaging the parts already installed. The hoses really fight you while trying to install. Just to note, I’ve installed multiple AIO Coolers before and this is how I always have done it and it was never a problem. It’s not something that I imagine would prevent an install, but something users should really be aware of.From what I can tell, all these issues listed are actually intentional because they make for a superior product. The larger radiator and the position of the pump improve the cooling performance. And the stiffer tubes likely improve durability. If you are aware of these things and make sure it will fit in your case and on your motherboard, I think it will likely be awesome (never could test, but other reviews support this). But it did make for a very frustrating install and a loss of significant time and money for me.

Coloquei esse Walter cooler no processador Ryzen 7 9800X3D e não passa de 40 graus

Se avete seguito l'evoluzione dei dissipatori AIO, sapete che Arctic è una garanzia, ma con questa serie III hanno superato se stessi. L'ho scelto per raffreddare il mio nuovo Intel Core Ultra 7 265K e i risultati sono semplicemente sbalorditivi per questa fascia di prezzo.​Una delle novità più interessanti è l'inclusione del contact frame specifico per il socket LGA 1851/1700. Invece del solito sistema a staffe, si sostituisce direttamente il meccanismo di ritenzione della scheda madre. L'installazione richiede un minimo di manualità in più, ma garantisce una pressione perfetta sul processore, eliminando i problemi di curvatura del chip. Sulla mia B860-Plus si monta perfettamente, anche se lo spazio intorno ai VRM è millimetrico.​Per quel che riguarda prestazioni termiche e silenziosità l'Arctic brilla. Mantiene l'Ultra 7 a temperature incredibili: in idle siamo sui 30°C e sotto carico pesante in rendering non ho mai visto la CPU superare i 75-78°C. Il radiatore da 360mm ha una massa radiante generosa e la ventolina dedicata sulla pompa non è solo marketing: aiuta davvero a tenere fresche le fasi di alimentazione della scheda madre, cosa fondamentale se non usate una top di gamma.​Il design è molto "industriale" e massiccio, deve piacere. Un enorme pro è la gestione dei cavi: le ventole sono già pre-cablate lungo i tubi e arrivano alla pompa, quindi avrete solo uno o due cavi da collegare alla scheda madre. Un paradiso per il cable management.​Cosa sapere prima di comprare:​- Spessore: Il radiatore è più spesso della media (38mm + ventole). Assicuratevi che il vostro case abbia spazio a sufficienza sul top, altrimenti rischiate che tocchi le RAM o i dissipatori della mobo (io ho dovuto tagliare un angolo dell'AIO per questo motivo)​- Tubi: Sono belli rigidi e di qualità, ma richiedono un po' di spazio per essere piegati correttamente.​Difficile trovare di meglio, anche spendendo il doppio. È potente, silenzioso e risolve alla radice i problemi di contatto dei nuovi processori Intel. Se avete spazio nel case, è la scelta definitiva per chi cerca prestazioni da workstation senza il rumore di una turbina.

رائع وسهل التركيب لقد انخفضت حرارت معالجي i9 13900k

Excelente producto, extremadamente eficiente y de precio muy bajo. Ya es el segundo que compro, y sinceramente me pregunto qué sentido tiene gastar más para tener un rendimiento y/o confiabilidad inferiores... Es sin duda uno de esos rarísimos casos en los que un producto superior se vende a un precio inferior. Milagroso!Sí, el grosor es un poco superior al de otros rivales, pero precisamente esto contribuye a las excelentes prestaciones del producto! Sin embargo, lo he instalado en tres PC diferentes y solo en uno tuve que intervenir modificando ligeramente el interior de la caja para instalarlo. Intervención de todos modos muy factible.

購入より幾分か時間が経過しましたので詳細をば。【CPU】・Ryzen 9950X(SMT運用)PPT:240W～256WEDC:232A～248ATDC:162A~192A【Mobo】・ASUS TUF-GAMING B650E-Plus WifiCPU Loadline Calibration:Level2～Level3運用C-State Limitterの解除状態:AutoClock Stretch(Core/L3 Cache):DisabledSpread Spectrum:Disabled[VRM for CPU]レスポンス:UltraFastVRMスイッチ速度:450kHz(MAX)電力供給方式:Extreme(電圧バランス優先)電流上限:100%[VRM for SoC]VRMスイッチ速度:450kHz(MAX)電流上限:100%【今回使用したCPUグリス】・ARCTIC MX-7まず初めにファンの静音性についてですが流石に3000RPMまで行くと結構ｺﾞﾜｧｱｱｱｱｱｱｱっと音がしますね結構ビックリするくらいな音出して来るのでなれない人は不安に思うかも知れませんねただ、2200RPM台であれば他の360mmと比較したとしても結構静かなモンですまぁこちらは正直同社が発売しているP12 Proまんまなのでそちらのレビューを参照したほうが早いですね性能はもちろん良いです。では本題へ。まず9950Xを冷やしきれる、その時点でとても素晴らしいですデフォルトPBO状態はさることながらCPUに関して結構無茶な熱を加えるASUS製のMoboでもCPU電圧は1.456vPPTは256WTDCは192AEDCは240Aまで耐えてしまいます最高温度はCCD1の96.3度で限界である115度まで11度程マージンがあります。俺は溶損が嫌なので90℃でスロットルする設定でやってますが最高性能を発揮させたい方にはこちらか、場合によっては当製品の上位グレードである420mm版を購入すれば間違いないと断言しておきます。ちなみに上記のスペックシートに記入した最小値の方のPBO設定では最高温度がCCD1の91.3度でしたこちらもまずまずの成果ですスロットルが効くまでのタイムラグを減らしたいようであればマザーボードにあるプリセット回転数に+10%程盛ってやればほぼほぼ指定した温度と合致する形で温度を制限しにかかってくれます。おすすめのPBOでのTjmax値はやはりと言うべきか85℃。この設定であればほぼ間違いなく95度には到達しないので溶損から貴方のCPUを保護してくれるでしょう。なお、CPUクーラーとしては言わずもがなGPUクーラーとしてもポテンシャルは高いです。某ドイツのエンスージアストの方を筆頭に、まれに当製品をGPUクーラーとして扱う人も居る模様。全体的に素晴らしいですが、一つ難点が。取付が非常にしづらい…正直ここは改善して欲しいですね、マジで9950Xのヒートシンクにガリ傷はいっちゃいましたもんほんっとに締め付けが難しい今まで水冷ヘッド取り付けて慣れてる人間からしても難しいこればっかりは悪い点として言及せざるを得ないです…ですが、本当にクーラーとしてはいい製品なので-1を打ち消して★5評価にさせてもらいます。以下、温度の大まかな概要を記載し当レビューを終了とさせていただきます。また何かあれば追記いたします。【アイドル時】・Curve Optimizer無し:39.2℃(室温25度以上)・Curve Optimizer無し:38.8℃(エアコン有り、室温20度)・Curve Optimizer有り@平均-24mv:38.4℃(エアコン無し)・Curve Optimizer有り＠平均-24mv:36.8℃(エアコン有り)【低負荷時:目測の為バラツキあり】・CO無し:45℃～53.4℃・CO有り:41.4℃～49.6℃【中負荷時:目測の為バラツキあり】・CO無し:63.2℃～66.5℃・CO有り:58℃～63.8℃【高負荷時】・CO無し:78～96.3℃程度・CO有り:73～91.3℃程度【上記温度計測時のPBO/Tjmax/電圧各種指定値】※CPU温度に影響する物のみ記載・Tjmax:95℃・Boost Clock Override:+200MHz<CCD1:5950MHz><CCD2:5650MHz>・PBO Scalar:x2・電力制限:上記レビューの最上位に記載・VRM速度/フェーズ:利用出来る限界値/常時フルオン・ProcHot VRM Throttling:Enabled・Disable Peak Limitter:Disabled(つまり上限設定あり)・CPU voltage:Auto=Default Behavior for Auto Overcloking VID. AMD Official.・SoC voltage:1.135v実観測値1.120v～1.125v。±10mv～15mv。LLC設定:無。BIOS内項目が存在せず。・VDDG CCD Voltagemin:0.900vmax:0.960v・VDDG IOD Voltagemin:0.900vmax0.960v・CPU VDDIO:1.232v-1.280v(HWinfo読み)BIOS内指定値は1.200v～1.250v。1.4vは危険と判断。最高でも1.350vが妥当。プラスオフセットが強めなのでIODへの損害が予想される為。