FLASHFORGE Adventurer 5M 3D Printer, 600Mm/S Max High Speed FDM 3D Printers with Fully Automatic Leveling, 280°C Direct Extruder with Detachable Nozzle Rá

It's a great printer. Super easy to set up. I had it out of the box and printing in 20 minutes. I came to this from an old bedslinger and it's a night and day difference. Automatic leveling and a full enclosure makes a huge difference. I bought the full set of nozzle sizes and tried out the finest one. It makes amazingly detailed prints. I haven't tried the large nozzle yet, but I'm sure it'll be fine. There are a few little annoyances. The top of the feed tube rubbed on the lid for the first few prints until I trimmed it down. The placement of the feed for the filament is in the top right rear corner of the machine, which limits placement options. I got a filament dryer and modified it with a feed tube coming out the top. It sits right next to the side and works great. Most annoying is the small fan that runs constantly when the rear power wlseitch is on. It is quite annoying, so I just flick the switch when I'm not using it. Beyond those little issues it's been pretty much flawless. I had one print fail, but it was my fault because I touched the build plate with my bare hands and oil from my skin caused the next print to not adhere. After Cleaned the plate with soap and water and applied the included glue and never had another issue. I have made some taller objects and it is so much more stable than a bedslinger. I have been using the orca slicer and coming from Cura it was a bit different, but not a steep learning curve. I like that I can send the files wirelessly to the printer on my network. I have not tried the cloud print. Any annoying things about the printer are forgotten when the first perfect layer goes down and the speed ramps up. This thing prints So Fast compared to my old machine. It's like 5 times faster. Being fully enclosed means that errant drafts don't cause parts to cool unevenly and warp. This alone is worth the extra cost. Now I spend more time actually printing, and less getting the printer to work.

Great printer for the price, very happy with this purchase. I got this to replace an older printer I had. The auto bet leveling is an awesome feature, I wish I had it years ago. I've printed several things on it now and they are a nice quality. Setup was easy. I think I had the test print started within 10 minutes of opening the box. The removable bed plate makes getting the prints off really easy but there has been a bit of a learning curve for me to get good adhesion, just need to use quite a bit of the included adhesive. The wireless printing is also a big improvement over the sd card I used on my old printer. The app is pretty intuitive and I'm getting used to it quickly. The standard settings have been working well for the PLA I've been printing except I've had to turn the movement speed down until I can get better adhesion. I would definitely recommend this printer. I may even buy another for my retired parents to try.

I have wanted a 3D printer since the craze really took off, and a friend of mine recommended this machine as a good starter printer. He was absolutely right. This machine is extremely easy to use. Even my 8-year-old son was able to grasp the basics pretty quickly. I’m an avid tinkerer, and I have already printed so many things with it that have made life around the house easier. I did have a warranty issue right off the bat with the LCD screen and ribbon cable, but customer support was excellent. I sent a quick email, and they had the replacement parts in the mail the same day. I received a brand-new screen and cable in just under three days. That kind of support and after-sale service is impressive. Would I recommend this to a beginner? Absolutely. The one thing I have found a little challenging is multi-color printing, but that is not really a fault of the machine. I knew what I was buying, and this is clearly designed as a single-color printer. That said, it does make it very easy to schedule pauses during a print so you can swap filament colors when needed. The software is pretty straightforward overall. I have noticed that sometimes, after back-to-back prints, it may require a reset before the software reconnects to the printer. For example, if I am printing four objects, it may print the first two just fine and then need a quick power cycle before continuing. Once reset, it works fine again. I do wish it allowed both Wi-Fi and Ethernet to be active at the same time. I have multiple networks in my house, and it would be nice to have the printer available on both, mostly for redundancy. All in all, this is a 5-star machine for me. It is beginner-friendly, reliable, easy to use, and backed by great customer support.

i bought this because it was supposed to be easy to use and ready to go out of the box after a few screws are removed and a bed test, well the bed wont heat up, the filament it came with is brittle, the cube it prints failed i suspect because the bed wont heat up, not at all, i placed my hand on it and it wasnt even warm a little bit, i got a broken printer out of the box, its not my job to repair a new printer. i should not have to fix anything on it right now. when we order something new it should work, going to message amazon about it later and try to return it, i will try again though and get another one because bad products can and does happen, sure they test the printer at the factory by running filament through it but that doesnt mean they test the rest of it or that damage doesnt happen during shipping so i am willing to give them another chance as of right now they get 1 star, way to much money for something that doesnt work properly out of the box.

This is a really solid option if you’re new to 3D printing or just want something that’s easy to get up and running quickly. The setup was straightforward, and I was able to get it going almost immediately without having to troubleshoot or adjust a bunch of settings. It comes with a small amount of filament, which is helpful for getting started right away and testing your first prints. Once it’s up and running, it prints quickly and consistently, and the overall process feels very user-friendly compared to other printers I’ve tried. Pros: Very beginner-friendly and easy to set up Quick start—able to begin printing almost immediately Includes starter filament to get going Fast printing speeds and smooth operation Cons: Only includes a small amount of filament, so you’ll likely want more on hand Overall, this is a great choice if you want a reliable, easy-to-use 3D printer without a steep learning curve. I’d definitely recommend it for beginners or anyone looking for a more plug-and-play experience. Hope this helps if you’re deciding!