Question 1

I have a vehicle lift that is 3 phase , 3 hp , 8.5-8/4 amps . Motor runs one direction pump . Which phase converter should I be looking at ?

Accepted Answer

I don't know about your needs ... but ... I have two of these units each running a lathe and milling machine. both are 3hp 3phase motors. they have worked without issue for about 6 months. I would buy this unit again if the need came about. Hope this helps ...

Question 2

Error 1 code. Electrician says there are no shorts. How do we troubleshoot this?

Accepted Answer

I had this same error. 2 electrician and I couldn't figure it out. Hahahaha I had to use the "run" button as the tools on switch and then ramp up the frequency with the dial.

If you use my tools on switch it goes into protection every time.

Question 3

Is it possible to wire in a jog button?

Accepted Answer

After the drive has been programmed for the motor that it is running then in the control wiring there should be a jog control just like run for forward & run reverse

Question 4

Will this make the motor less powerful than if it was in a true phase 3 outlet?

Accepted Answer

Simple answer, yes. It can spin a lot faster as it goes up to 400Hz, but it trips security and shuts down if more than 3 Amps (3000mA) is drawn by any of the three motor coils. Not truly 12 Amps as advertised. It starts to go up in frequency slowly to avoid overload, but almost any load in the motor will trip security and my motor was only 1.5 hp, not 3 hp as advertised. I ended up doing a rotary phase config by using two motors and a capacitor and not using this. Keep in mind that my need was to convert 2-Phase 220v to 3-Phase 220v, which it is supposed to handle, but it may behave different if needed in a different configuration. Just my experience (I am a certified technician).

ASIN	B07D76365G
Antenna Location	Spindle motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor
Best Sellers Rank	#1,123,556 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #25 in Power Spindle Sanders #1,303 in Electrical Motor Controls
Brand	MYSWEETY
Built-In Media	VDF
Color	Black
Customer Reviews	4.1 out of 5 stars 417 Reviews
Display Type	text
Electrical Output Waveform	Modified Sine Wave
Frequency	60 hertz
Input Voltage	220 volts
Inverter Capacity Volt-Amp	2200
Item Dimensions L x W x H	7.87"L x 5.12"W x 4.06"H
Item Weight	3 pounds
Manufacturer	MYSWEETY
Mfr Part Number	202549
Model Name	YL600
Model Number	YL600
Number of Items	1
Number of Outlets	3
Number of Packs	1
Output Voltage	220 volts
Peak Output Power Watts	2200
Power Source	220v
Recommended Uses For Product	Spindle motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor Recommended Uses For Product Spindle motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor See more
Standby Power Shutoff	90-98%
UPC	687345902642
Unit Count	1 Count
Wattage	2.2 KW

MYSWEETY Single Phase to 3 Phase Converter, 2.2KW 3PH VFD 220V/10A 0-3200Hz Output Variable Frequency Drive Control Inverter for Spindle Motor CNC Speed Control

Details

Details

Description

Specifications

Common Questions