Bamboo Lab 3D Printer Bed Adhesive,3D Print Glue for Hot Bed,Avoid Warping for Printing ABS,PLA,PETG,TPU on Various Build Plate with Stronger Adhesion,No Residue, Durable than Glue Stick-60ml

This stuff is noticeably better than the glue stick I was using before. I run a Bambu Lab A1 and first layer adhesion was always my biggest headache with certain filaments like ABS and PETG. After applying this, prints stick firmly during the build and release cleanly once the plate cools down. No residue left behind on the plate either. A thin layer goes a long way so the bottle lasts a while. I have been through a couple of bottles now and the consistency has been the same each time. If you are tired of wrestling with first layer failures, this is worth trying.

This is a good and easily applied bed glue. I use it on the Bambu A1 printer. I had not used any type of bonding agent before on my printer. However, with some filaments, and the smooth build plate, it is pretty much a requirement. If you are getting lifts or bad plate adhesion the best thing to do is get a bonding agent, like this bed glue. This works so much better than the typical glue stick. Rather than being a solid glue this is liquid. It spreads much easier and more completely than a solid glue. The liquid nature of the glue gets into the pores of the build plate better. I have been using this for about a month and have had no negative issues with it. It cleans off easily and leaves nothing behind. The bottle itself is made from a softer plastic which allows you to squeeze the bottle to adjust the amount being laid down on the build plate. The applicator tip is some sort of material that is porous and lays the glue down evenly. So far I have only tried it on the smooth cool plate, and there it does well. I will use it on other plates in the future and if there is any change in my experience I will update this. Do not apply it when the plate is hot.

It had been suggested that I try this adhesive for those times when I am having issues with bed adhesion. I have to admit, this stuff really does the job and makes the prints stick better. It rolls on to the print bed easily, dries fairly quickly (as long as you don't put on too heavy a coat), and holds the print well. And then you can either choose to leave it on the print bed and benefit from it for a few more prints, or wash it off before the next print. Either way, it cleans easily or lasts for a long time. Plus, the prints aren't too difficult to get off once the print surface has cooled. They are stuck really on tight when the print surface is warm though, which is a real benefit when you're needing to print something that keeps coming loose when it shouldn't.

I'm impressed with the ENOMAKER Bamboo Lab 3D Printer Bed Adhesive. It's a game-changer for hot bed printing, eliminating warping and failed prints. This adhesive is far superior to traditional glue sticks, providing a strong and even bond. It's easy to apply and clean up, making it a must-have for 3D printing enthusiasts. Say goodbye to print failures and hello to successful, stress-free printing with this reliable and effective adhesive. It's a simple yet powerful solution that's taken my 3D printing to the next level.

Perfect for use with TPU and PLA-LW (foaming). This should be in your toolbox.

Excellent, tested with PETG and ASA on the Engineering Plate

Been 3D printing for years and this is the best adhesive I have found. Application is simple, it dries within 1 to 2 minutes, it cleans off very easily with water, one bottle lasts for 40 to 50 plate applications, and its "hold" factor is near perfect with sometimes getting 2 or 3 prints with one application.

Works well but seems less viscous than the original batch I had used before. It is worthwhile though just be aware it’s probably not verbatim the same