Spigen for Galaxy Z Fold 6 Case, Slim Armor Pro (2024) [Hinge Protection] - Black

After trying a few cases and having issues with them (flimsy kickstands, loose fittings, or overly bulky) decided to try this case and absolutely love it though I do have two slight complaints.The case itself feels durable and install was super simple and straight forward. Peel the covers off the sticky mounts and press on the phone with it open. Before install I noted the case resisted flexing before install and either open or closed the linked hinges feel solid and always line up perfectly and just feels great in the hand. I very much like that there is no built in screen protector so you can choose your own.But that leads to the first downside for me. The left side of the front screen case is super thin and just flexes and shifts alot. I am tempted to try and find some super thin adhesive tape to hold it down but without the built in cover it's to be expected. Though would be amazing if that was included.The other issue is the hinge cover. The springs return nicely and it's a very slim cover for dust and dirt but being so thin it does seem warped and doesn't sit very flush with the rest of the case. Pressing on it gently you can see it shift closer and flex slightly. I am not sure if it's a general fitment issue from the thin flexible edge of the front screen case or not. While not a major concern it should be noted.The magnet itself is insanely strong in mine. I have seen others complain but I feel with quality magsafe products it's not an issue. My scosche car mount can hold the phone folded open in portrait view without falling or rotating. My battery pack attaches strongly but the real kicker is the magsafe kickstand. I can not remove it folded flat against the phone the magnets are just too strong. I have to open it and lever it off the back to swap the the car dock. Not a downside in my opinion.Overall it's an amazing case without the gimmicks or niche ideas I have had in others that honestly just complicate the design without adding long term value. Will definitely be choosing spigen again.

So far this is the best case I've found for the Z Fold 8. It is one piece, good bumper for the front screen, and keeps the phone slim profile while protecting the phone from all angles. It is thr only full case I've used that doesn't make it awkward to use the fingerprint scanner either. Hinge protector is slim against the phone so it doesn't feel bulky either

After replacing my Fold 3 with a Fold 6, I knew I needed a better case. I'd used an aramid fiber case for my 3 and loved it, but I had no hinge protection. By the time I was done with it, the hinge had so much debris inside it that I couldn't unfold it all the way.For my 6, I absolutely wanted hinge protection. I knew it wouldn't seal it from dust and tiny debris, but it's better than nothing and should at least help. I really wanted an aramid case again as they're very thin and feel great, but couldn't find any acceptable one.I spent days and days researching different cases. After narrowing it down to three, I pulled the trigger on this one and planned to return it if I didn't like it. Lucky for me, it's great.It's slightly thicker than aramid fiber and is noticable, but not so much that it's uncomfortable or makes the phone feel significantly different. After a day or two I didn't even notice is was there. I was worried about the quality of the hinge cover as it's connected on only one side, but it's worked very well.My only complaint is with the front screen cover (more like bezel) which, unfortunately, is always the weak point on Fold cases. As is the case with most cases (pun intended), the most they can offer is a bezel that fits as tightly as possible and utilizes double-sided tape.They actually did a pretty good job! It fits the front of the phone very well, better than most. My only complaint is the right-side edge of the front cover portion; it uses double-sided tape along the length of the phone to secure itself to it, but the tape is too thin to be effective. Even with the great fit, immediately after installing it would slightly pop off. Not upward, but to the side. No amount of holding it back in place would last more than a few minutes.Luckily, as I said before, the front piece actually fits the phone extremely well, it's a tight fit, so there are no issues with the piece coming off - it's not going anywhere. That one edge will just have a tiny amount of play to it for a while. Fortunately, it seems that over time it's molded itself against the phone a bit. It's still not completely secure, for instance if you pull on it slightly with your finger you'll notice that it will bend outward a tiny bit rather than being secured to the side of the phone, but outside of intentionally doing that it seems to be a non-issue at this point.My only other slight complaint isn't unique to this case - the front screen lip. In order to protect the screen when you drop it flat on its face, the surrounding portion has a *slight* lip; maybe a millimeter or so. Because of this, actions that require you to slide to the very edges of the front screen are more difficult. Trying to select text that begins or ends at the edge of your screen, using swipe controls in place of recent/home/back buttons, trying to drag all icons to different home screen pages, etc, can all be a bit of a pain. Luckily some of these are fixed in software; for instance, you can now use two fingers to move apps and other stuff on your home screen (push and hold the all with one, then use a second finger to swipe between pages). Selecting a block of text where the first or last word begins/ends right at the edge of the screen is probably the biggest example - trying to get that one letter that's up against the screen border can take some finagling. Again, though, that isn't unique to this case and I'd rather be slightly annoyed twice a week than not have a screen lip and have my cover screen get cracked.Long story short - it feels high quality, the hinge cover is MUCH better than expected, the grip is good, it doesn't feel excessively thick, the cutouts for USB-C, the side buttons, cameras, and fingerprint sensor are all great, and it looks good.

Spigen is awesome!!! I've bought Spigen cases for the past four Samsung phones I've had and it's never disappointed. I spent over $50 on z-fold 7 case and it was garbage compared to this one. Quality material, spring loaded hinge unlike others where it's just a plastic hinge, feels great in the hand with awesome beveling for ease of use of the sidebar and ease of button accessibility. Definitely worth more than what I paid great case

Don't recommend for anyone who uses the open mode to play games. Very expensive and because of the design the hinge protector, phone can no longer sit flat on table in tablet mode. Some people like this as it props the phone up a tad for watching a video. The problem with this is if you want your phone to stay still while tapping on screen, it will not.Since there is no way to disable hinge protector, especially while open that does not require you to either completely remove the case (ruining the adhesive strips every time) or ripping the hinge off completely defeating the purpose of a hinge protector in the first place as once it's forcibly removed I doubt it will just pop back on (considering it's held in place with springs that would unwind once removed). This is an enthusiast level price being 75+ USD and some countries complaining of prices due to shipping issues of 200+ in some areas because of availability. That is a lot to spend on a case that offers close to no protection if dropped while screen is open (the bevel on insides is same level as the screen, so realistically it's offering no protection for dropped open devices which is the most likely scenario I drop it in. Realistically, with this case on this phone it becomes worse than my s23 for gaming purposes since the outside screen is smaller, and who buys a MSRP $2k phone for not enjoying games on the larger screen.TLDR; Overpriced cheap Chinese design that uses super glue to hold it on the device (adhesive strips). No forethought went into the design of this case for the device it was made, as the usage of this device is meant to be primarily open for the bigger screen real estate. Avoid this and get an otter box, you'll get a better protecting case, that is bulkier, but will not require you to play games at a third of the size of the device is capable of. If someone had handed me the (2) pieces of the case that locks on phone and asked me how much I thought it cost, I would have said 15-20 bucks, not 70+.I probably wouldn't buy another Spigen case, as this is the second case I bought in the last 3 years for 2 different devices at a high price that burned me. If Spigen would stop firing their engineers (the people that made them a good company in the first place) and outsourcing their manufacturing needs to a cheap Chinese company(ies) (only to slap their own "logo" on the side and call it a day) they might retain some of their somehow loyal customers for a mediocre overprice product. I on the other hand won't get burned a third time, and if you're considering buying spigen, don't. Save 30 bucks and buy an otterbox, as it offers better protection and a better design especially for games. Couldn't be more disappointed in spigen products over the last year or two. Management seems to be making poor decisions to cheap out in cost while cheapening the quality of the product. Some might call that "good marketing" but even a student failing a basic economics course in college can tell you this strategy only pays off in the extreme short run and always leads to bankruptcy. The shame here is spigen used to make amazing cases. Now management destroyed the name.

The case looks great and has great intentions. The case itself especially on the front screen where it folds out has a VERY flimsy plastic portion. You can easily bend that plastic portion by touching it with near zero pressure. It feels very cheap for the price you're paying. The slim portion of the case is awesome, specifically when folded open.The case itself if a great option (when I bought it at $45) just for the fact that it's almost half the price of an otter box. But it is most definitely not worth in any sense, a $79.99 price tag.As for the magsafe, the magsafe portion is a 50/50 shot whether you'll be able to use it or not. I personally can only use my magsafe magnetic stand and that's it. My code 118 wallet with magsafe capabilities won't work. The case would be perfect if they could just simply relocate the magsafe portion of the case down another 1/8" inch.Overall the phone feels a lot better in your hands and feels more protected than if it didn't have the case on there (Duh). As of right now, if something was to break on this case I would break down and buy the otterbox if I was wanting a more superior warranty guarantee and definitly more superior protection.Some other key points that may be of interest:-this case doesn't hinder the sounds quality of your speakers-great hinge protection-YOU CAN USE A GLASS SCREEN PROTECTOR PERFECTLY! (a huge selling point for me!)-somewhat the same size as my s23 ultra with an otterbox on it (maybe 1/8" thicker when folded closed)-very thin when folded open (doesn't really change the thickness of the phone, keeping the advertised thickness as advertised and seen on praised on YouTube videos)-you can easily get to your buttons and still use your fingerprint scanner on the side with ease (Even when folded closed)Cons:-Magsafe accessories have a 50/50 shot that they're truly going to be compatible or not due to how far they molded their magnet into the case-double sided tape used for extra "hold security" on the inside with a form of a "Snap one in to fit"-flimsy plastic (DON'T SPEND A FORTUNE ON THIS CASE, IT'S DEFINILTY NOT WORTH MORE THAN $50)

Very lightweight and slim. I dropped my Fold 7 phone a few times recently on the tile floor and its old, bulky case saved it. I'm hoping that 1) I don't drop my phone again any time soon and 2) if I do, this new case from Spigen protects it. I've had good luck with Spigen cases in the past and am very happy with the fit of this new one. The mag fit is a nice bonus (once you use it, you'll never go back). The first case I bought for my Fold 7 came with a mag fit wallet/kickstand. That case was junk, but the wallet is nice, so I'm still using it. It works great with this Spigen case. The wallet bulks up the phone but it snaps off in a second if I want to lighten it up. This case is really nice: It protects my phone (appears to, at least), lets me access all of its buttons, adds mag fit to an otherwise outstanding phone, and doesn't add a lot of bulk. I will try to report back when the inevitable fall to the ground happens about its durability. So far, tho, it's highly recommended.

The Spigen Fold Seven case is exactly what a foldable phone case should be. The fit is absolutely perfect—snug, precise, and secure without adding unnecessary bulk. It maintains the sleek profile of the phone while still feeling solid and protective in hand.One of the most impressive aspects is how fluid the open-and-close motion is. The phone opens and closes smoothly with zero resistance, binding, or awkward pressure on the hinge. Even better, there is no separation at all between the faceplate and the phone. Once installed, it stays firmly in place and feels like a natural extension of the device rather than an add-on.The case doesn’t flex, shift, or loosen during daily use, and it inspires real confidence when handling a foldable phone—something not all cases manage to do. Spigen clearly put thoughtful engineering into this design, and it shows in everyday usability.If you’re looking for a non-bulky, well-engineered case that protects without interfering with the foldable experience, this one is an easy recommendation. Spigen nailed it.

J’adore cette coque de téléphone. Elle protège très bien mon téléphone.J’ai juste une question : quelle protection d’écran puis-je utiliser avec cette coque pour le Samsung Galaxy Z Fold 6 ?

It is the best case for protection and looks if you don't care about pen or standBUT EXPENSIVE

Ottima cover robusta.Aumenta volume e peso del telefono ma é indispensabile per la sicurezza da caduta.Spigen sempre al top

Encaja muy bien y el tacto de la bisagra y calidad es muy bueno

Product was easy to install, feels solid and like it will actually protect the device. Adds a lot of much needed grip and thus enhances the phone when opened. Recommend. Price is high though