Shelly Plus 0-10V Dimmer | WiFi Smart Dimmer Switch | Dimmable Lights | Home Automation | Compatible with Alexa & Google Home | iOS Android App | No Hub Required

I have paired a couple of these with Reylax 24V dimmable LED drivers to control LED strip lights, and they have been excellent. I fitted them near the drivers in the loft above the rooms, and they have worked flawlessly for well over a year. Unlike the experiences of others who have left reviews, I find the dimming to be very smooth, with no noticeable steps in brightness - maybe the drivers or lights that other people used are the actual problem, not the Shelly dimmer. I like that you can set the speed at which the lights go from off to on and vice versa, ramping up (or down) over a few seconds. I also like that you can set a schedule of how bright the lights are - one of the rooms I used one in is a bathroom, and I have set the lights to come on at a low level overnight so as not to be blinding. I have them set turn on and off with a simple switch, although they can be set up to work with a push switch (press and hold to change the brightness) or two push switches (one to increase and one to decrease the brightness). I have these connected to Alexa, via the Shelly skill, and to Home Assistant. For the latter I used MQTT because they are not installed in the house where my Home Assistant server is located. Voice control with Alexa works well and instantaneously, as does control from Home Assistant. Like many Shelly devices, they can be set up to act as Bluetooth proxies in Home Assistant if they are on the same internal network. This does not work for me directly because of where they are, but I have set them up to run a script that connects to Bluetooth room temperature sensors and sends that data using MQTT, which is very useful. Overall, even though they are relatively expensive, I think they are excellent value for money for how they work and what they are capable of beyond they basic light control functions.

Works brilliantly in my lounge for dimming two ceiling lights. A little larger than the Shelly minis. Wouldnt fit into a standard 25mm switch back box with the cables, switch and connectors in there too. Had to remove back box and fit a deeper 47mm. A 35mm may have done it but would be tight. Works well with Alexa. A touch pricey.

Seems very good and much more feature rich than many. Auto calibration to lights was a pleasant surprise. After the calibration, they just work.

Could not get it to work on multiple WiFi systems,help from Shelley was good but maybe I just got a bad one,was too late to return

It does what I says on the box

Works exactly as expected, very responsive, tiny... Just the job. I hid this in my ceiling rose allowing me control my 1-10v light with no dedicated low voltage wiring.

The Shelly unit should be really good. Nice small package, connects well, a good few features. However, the software does not have dimming curve compensation so when dimming down nothing happens for 80% of the time and then at the last 20% it dims quickly. It is also not Matter compatible so probably best opting for the Gen 4 model.

There are two types of 0/1-10v controllers: current sourcing (provides 10v supply) and current Sinking (requires 10v supply). This unit is current sinking, so requires the light controller to actively output 10v to this control unit, which returns 0-10v to control the dimming amount. My device to control requires a current sourcing input, so this Shelly dimmer is useless. It wouldn't have been a problem if Shelly had specified this, I could have just ordered something else.

Der Shelly Dimmer Gen3 überzeugt durch einfache Installation, stabile WLAN-Anbindung ohne Hub und zuverlässige Dimmsteuerung. Funktioniert mit LED & Co., lässt sich per App, Alexa/Google und über Automationen steuern. Sehr flexibel, schnell und zuverlässig – top Preis-Leistung!

Normally don't write reviews. This product is so adaptable and meets all of my needs. Controls a 13 thousand overhead lamp to perfection. 0-10 / 1-10 volt dimming is app selectable. Dusk to dawn, no problem. Separate motion detector input available. Auto time out to off, configurable. Scriptable, Yes.

No tiene soporte para 120v. En absoluto. Al menos que tires 220v para un foco de 8 watts, Es un retorno garantizado.

Dimmer-Controller funktioniert einwandfrei. Man sollte aber beachten das die 0-10 Volt aus einem PWM-Signal bestehen. Manche Dimmer mögen das nicht. Besser dann den Shelly Dimmer Gen3 benutzen, der liefert ein sauberes Analogsignal.

Perfect