eSUN ABS+ Filament 1.75mm, 3D Printer Filament ABS Plus, Dimensional Accuracy +/- 0.05mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Cold White

I've used a variety of eSun filaments at this point, mostly PLA and PLA plus, this is the first ABS I've gotten from them and the first ABS I've ever printed with and let me tell you, this company really has their filaments down pat. Everything I've ever printed with eSun filaments has turned out phenomenally. And with this ABS, I truly expected a fight. Its supposed to be more difficult to print with due to warping and all that good stuff, but this ABS+ formula has everything you could desire for the perfect print. Its strong, has a beautiful matte sort of finish that makes it soooo much nicer looking than black PLA, its temperature resistant, AND holy cow is it easy to print with! I ran basically default profiles for everything in Orca and didnt have the slightest problem. Even printing without a brim, raft, or skirts, my first few prints went off without a hitch, which truly surprised me after fighting SOOOO hard with PETG right before this. I will say that ABS is traditionally considered to have some hydroscopic tendencies from what I've read, although not nearly as much a PETG for instance. I can't really say I experienced that with this filament. To be entirely honest, I threw it in the drier before hand anyway. But with PETG it seemed like if I didnt keep the drier cranked on full blast 24/7, it was so wet by the time you came back to print it was basically unprintable (depending on the brand). With this ABS, I forgot to turn the drier on a couple different times and never really saw a huge difference at all. On some layers it would seem to get a little flakey, if that makes sense. Almost as if it weren't laying down in a perfect layer or something. But it was, check out the photos for proof. It truly resulted in nothing but fantastic results on every print despite my observation of the strange flake that seemed to come off some of the solid infill layers as it printed. As I said, I'm rather new to this, so maybe all ABS just does that. I did have to add a brim to one print that warped a bit because it had such a small footprint on the buildplate AND because that side of the plate ended up slightly out of level when I checked it. I re-leveled the bed, added a small brim, and the next print went off without a hitch. Finally, ABS has a reputation for smelling horrid... Though while this filament does give off a faint "burnt plastic" kinda smell after you've been printing it legit all day, to me the smell wasnt potent enough to bother me in the least. Then again, my nose may be screwy, cause I can inhale resin fumes like its going out of style too without the slightest side effect. For the time being at least... lol. (I do use PPE while handling resin, Im just pointing out that my nose doesnt seem to be quite as sensitive to it as other people's does.) For the newbs out there like myself who have never printed in ABS before, I have added my basic slicer settings via screenshot, but if your working in Orca particularly, your basically fine to go with the default ABS profile and the default for your printer and nozzle. I would suggest turning the speed down just a hair, but it prints fine at full speed too! And MAKE SURE your cooling settings are dialed in or you risk cooling too much and causing warpage. Same goes for printing with an enclosure, it is ABSOLUTLE NECESSARY with ABS to avoid warpage. I would also recommend using a PEI plate for great adhesion, personally I used a textured PEI plate and had amazing results with minimal failure. I for one will be purchasing ABS from eSun again in the very near future, and in all honesty, I don't believe I'll go back to printing black in PLA at all unless I just need something with a gloss finish to it. This matte finish on the ABS from eSun is amazing, and I love it, and I want more of it. Haha.

Mała kurczliwość

EXCELENTE FILAMENTO

Mit dem eSUN ABS+ bin ich sehr zufrieden. Das Filament ließ sich bei mir sauber und zuverlässig drucken und hat durchgehend gute Ergebnisse geliefert. Die Druckteile sind stabil, die Oberfläche sieht ordentlich aus und auch die Haftung zwischen den Layern passt. Für technische Drucke und funktionale Bauteile aus meiner Sicht eine sehr gute Wahl.

Il filamento eSUN ABS+ è diventato uno dei miei materiali di base preferiti per la stampa 3D, grazie alle sue eccellenti caratteristiche. Qualità di stampa: La qualità di stampa è molto buona. Il materiale si comporta in modo stabile durante il processo e offre finiture solide e durature. È ideale per creare parti robuste e resistenti. Warping: Una delle caratteristiche che apprezzo di più di questo ABS+ è che il warping è ridotto al minimo. A differenza di altri filamenti ABS che tendono a deformarsi durante la stampa, questo mantiene una forma stabile, facilitando la realizzazione di oggetti anche di dimensioni più grandi senza dover utilizzare superfici riscaldate o tecniche aggiuntive. Resistenza e durevolezza: Il filamento offre una buona resistenza meccanica, che lo rende perfetto per progetti che richiedono solidità e durata. È una scelta ideale per creare oggetti che potrebbero essere sottoposti a sollecitazioni. Facilità di utilizzo: Anche se l'ABS è noto per richiedere attenzione in fase di stampa, questo filamento si comporta in maniera stabile e senza problemi, anche su stampanti 3D a temperatura standard. In conclusione, eSUN ABS+ è un filamento solido e affidabile, perfetto per progetti che richiedono robustezza. È facile da usare, ha un buon rapporto qualità-prezzo e, grazie al ridotto warping, si adatta bene a una varietà di applicazioni. Lo consiglio a chi cerca un materiale di base resistente e di qualità per la stampa 3D.