






Desertcart purchases this item on your behalf and handles shipping, customs, and support to Peru.
When ultimate power control is your goal, use the Fastronix 500A battery disconnect switch. This switch is rated to 500A at 12V with a 2000A intermittent duty rating for under 5 seconds. Mounting bracket with hardware is included to mount your switch in up to 96 different positions. Customize your mounting for any application! The black switch plate with easy to read ON/OFF labeling will ensure your switch is looking good and in the correct position every time. Review: "Ultimate" is The Right Word!!! - ** Added Several Photos in SEP 2023: The first is of the of the overall project - Soundstream amps and NVX capacitors. Next is the Optima Yellow Top D35 power source up front that NOW does not ever need to have its nearby fuse removed in order for me to do work in the trunk!!! And last but not least is the Fastronix 500A, seen in the background between the amps and the caps, cooly keeping things safe and conveniently accessible midships (i.e., the switch is easily reached through the back seat or trunk). ** I had been considering a heavy-duty battery disconnect for quite some time. But I wasn't too serious about it until I recently needed to do some mods to an elaborate car audio system in the trunk. I needed a reliable, bullet-proof, over-built way to: 1) "Unequivocally-no doubt about it" disconnect the car audio system from the battery - without having to pull an in-line fuse in the engine compartment, or disconnect the cable on the battery, or rely on some lesser part that was not up to par, or just not-very-wisely disconnect the power cable in the trunk and wrap it in a shop cloth or plastic bag, etc... and 2) Install and use the battery disconnect in the trunk to stop positive power flow to the audio system AND accommodate a cigarette lighter port so I can trickle charge the battery without having to open the hood or use the console cigarette port up front which is powered off by a relay after 15-minutes of the vehicle being off. After receiving the battery disconnect and taking a first look and feel of it, I knew it was going to be an easy and effective solution. After getting the battery disconnect position and cable run designs down pat, I set aside a couple hours to get it installed. After mounting it, I gave it a turn or two just to get a sense of the tension. I was rewarded with a bruised knuckle as the switch/handle combo had no affinity for a neutral position... it slams itself properly into the open or closed position... trying to balance it in a neutral position is not going to succeed. Excellent! In use? Well... just... Wow! What a solid, essential but unobtrusive piece of wizardry this switch is!! It has been of use already for a number of routine jobs. The ability to just turn a handle and turn off power supply to my car audio system, for whatever reason, is a necessity and convenience I wish I'd pursued many, many years ago. It is easy to see its use for a hot cable that got laid on a fender by mistake. And for a hobbyist such as myself, who owns a car audio system which has hot capacitors and other pieces of equipment that just can't be replaced very easily after some catastrophic blunder, like... I don't know, burning down the car... this is a miracle, must-have, should-have-had-by-now device. Add to that the fact I can now remove the car audio system, especially the capacitors, from the battery circuit and use the connected cigarette lighter port to send unimpeded (i.e., not thwarted by a relay) trickle charge to battery... well, let's just say that is an incredible bonus!! (Note: The cigarette lighter port design was simple: attach cigarette lighter port Y-cable positive to Fastronix battery disconnect positive - hot upstream, cold downstream when battery disconnect is in "open" position. Next, connect cigarette lighter port Y-cable negative to audio system common ground on the body.) Review: TOP QUALITY - GOT THIS SWITCH TO INSTALL ON MY TRUCK. TOP QUALITY. STURDY!!!!!! NOT THOSE FLIMSY CHINESE KNOCK OFFS










| ASIN | B0C5P74S47 |
| Actuator Type | Rotary |
| Brand | Fastronix Solutions |
| Circuit Type | 1-way |
| Colour | Silver |
| Connectivity Protocol | Wi-Fi |
| Connector Type | Screw |
| Connector type | Screw |
| Contact Material | Metal |
| Contact Type | Normally Open |
| Contact type | Normally Open |
| Control Method | App |
| Controller Type | Push Button |
| Country Of Origin | Taiwan |
| Current Rating | 500 Amps |
| Current rating | 500 Amps |
| Customer Reviews | 4.5 out of 5 stars 79 Reviews |
| Insulation Resistance | 100 Ohms |
| International Protection Rating | IP66 |
| Item Dimensions | 9.1 x 8.9 x 14.5 centimetres |
| Manufacturer | Fastronix Solutions |
| Manufacturer Part Number | 303-007 |
| Material | Metal |
| Mounting Type | Panel Mount |
| Number of Items | 1 |
| Number of Positions | 2 |
| Operating Voltage | 12 Volts |
| Operating voltage | 12 Volts |
| Operation Mode | ON-OFF |
| Operation mode | ON-OFF |
| Specification Met | IP66 |
| Switch Type | Rotary |
| Terminal | Screw |
| Unit Count | 1.0 count |
| Upper Temperature Rating | 185 Degrees Fahrenheit |
| Wattage | 6 KW |
R**M
"Ultimate" is The Right Word!!!
** Added Several Photos in SEP 2023: The first is of the of the overall project - Soundstream amps and NVX capacitors. Next is the Optima Yellow Top D35 power source up front that NOW does not ever need to have its nearby fuse removed in order for me to do work in the trunk!!! And last but not least is the Fastronix 500A, seen in the background between the amps and the caps, cooly keeping things safe and conveniently accessible midships (i.e., the switch is easily reached through the back seat or trunk). ** I had been considering a heavy-duty battery disconnect for quite some time. But I wasn't too serious about it until I recently needed to do some mods to an elaborate car audio system in the trunk. I needed a reliable, bullet-proof, over-built way to: 1) "Unequivocally-no doubt about it" disconnect the car audio system from the battery - without having to pull an in-line fuse in the engine compartment, or disconnect the cable on the battery, or rely on some lesser part that was not up to par, or just not-very-wisely disconnect the power cable in the trunk and wrap it in a shop cloth or plastic bag, etc... and 2) Install and use the battery disconnect in the trunk to stop positive power flow to the audio system AND accommodate a cigarette lighter port so I can trickle charge the battery without having to open the hood or use the console cigarette port up front which is powered off by a relay after 15-minutes of the vehicle being off. After receiving the battery disconnect and taking a first look and feel of it, I knew it was going to be an easy and effective solution. After getting the battery disconnect position and cable run designs down pat, I set aside a couple hours to get it installed. After mounting it, I gave it a turn or two just to get a sense of the tension. I was rewarded with a bruised knuckle as the switch/handle combo had no affinity for a neutral position... it slams itself properly into the open or closed position... trying to balance it in a neutral position is not going to succeed. Excellent! In use? Well... just... Wow! What a solid, essential but unobtrusive piece of wizardry this switch is!! It has been of use already for a number of routine jobs. The ability to just turn a handle and turn off power supply to my car audio system, for whatever reason, is a necessity and convenience I wish I'd pursued many, many years ago. It is easy to see its use for a hot cable that got laid on a fender by mistake. And for a hobbyist such as myself, who owns a car audio system which has hot capacitors and other pieces of equipment that just can't be replaced very easily after some catastrophic blunder, like... I don't know, burning down the car... this is a miracle, must-have, should-have-had-by-now device. Add to that the fact I can now remove the car audio system, especially the capacitors, from the battery circuit and use the connected cigarette lighter port to send unimpeded (i.e., not thwarted by a relay) trickle charge to battery... well, let's just say that is an incredible bonus!! (Note: The cigarette lighter port design was simple: attach cigarette lighter port Y-cable positive to Fastronix battery disconnect positive - hot upstream, cold downstream when battery disconnect is in "open" position. Next, connect cigarette lighter port Y-cable negative to audio system common ground on the body.)
T**R
TOP QUALITY
GOT THIS SWITCH TO INSTALL ON MY TRUCK. TOP QUALITY. STURDY!!!!!! NOT THOSE FLIMSY CHINESE KNOCK OFFS
B**N
Well built
I used it for a dump trailer switch. It works , heavy duty, easy to mount.
A**R
packaging quality control
Well built switch. For the price it would have been nice to include the bolt or pin that holds the handle on
J**Y
Heavy duty , quality
Used cheaper ones that failed after a year .. seems much better quality,
Trustpilot
2 weeks ago
4 days ago