30‘’ - 40‘’ LED String Light Color Pro

Works great. My only complaint is that the light is more blueish, while I prefer a more reddish (lower, “warmer” temperatures). I knew this going in, and for me, the convenience of the optional RF dimmer switch and the USB power trump this minor complaint.I installed the 118” “Large” Luminoodle kit on a Vizio P55-c1 (55” 4K TV). I installed in on the back where the back was parallel with the wall behind it. Because the rear of my TV is slightly curved around the edges (~5” radius), the “flat” area that I applied it to ended up being about 3” in from the left, right, and top. If you’re unsure what size you need, measure out a piece of string and see how well that would work. Note also the connector length when considering placement. It’s a very thoughtful design, with a flat cable and bi-directional USB connnector. The adhesive is genuine 3M OEM molding tape. This is the stuff they use in the automotive world to e.g. stick the chrome model name of the car onto the car. Trust me, it’s what you want. Once applied (you peel the red tape off from the grey adhesive, which itself is stuck on one side to the back of the flexible Luminoodle circuit board), it’s not going anywhere until you want it to. As long as you have clean hands and a clean surface (dust the back of your TV before applying the Luminoodle), you’ll be able to re-stick it as long as you’re careful if you mess up initially. Again, it’s the best stuff that they could have possibly used. Measure it out and plan where you want to install it before you go to stick it on and you’ll do well.I also went for the optional RF dimmer switch, which is equally great, and shares the flat cable + bidirectional USB connector (you can plug it in “backwards” and it works fine). I control it using a Broadlink RM-Pro, which is another IMO very good product. The RF range is good, there are MANY brightness levels, and the interface is simple.As some of you have been, I was curious about the actual power draw for the large size. I measured using two genuine Apple 110v USB adapters - the 5W iPhone adapter and the 12W iPad adapter. With the dimmer on full bright, the 118” Large Luminoodle drew [email protected] (3.7 watts). On the dimmest setting, it was drawing [email protected] (this was running through a USB 3 extension cable into my TV’s USB 2.0 port -> tester -> dimmer on lowest setting -> Luminoodle).TL;DR a USB 3.0 port should be able to provide 900mA of power at 5v. This draws less than that in all circumstances for the large size, even with the dimmer. If your TV has a USB port that is blue inside, this will work as bright as it can possible go. If you only have USB 2.0, there’s a small chance that your TV will complain about the device drawing too much power for the Large size (not sure if other sizes draw less power, but they *should*) and you’d have to potentiallly use a USB wall adapter or something.

I purchased these lights for my new TV that I had purchased. It wasn't hard to attach these lights to the back of the TV and it plugs into one of the USB ports on the TV. It comes with a remote and works as it should. It does make a difference in a darkened room.

I don't have a home theater room or anything but after reading others reviews I thought if it could improve the picture quality then it was worth a shot. I looked at various brands and makers that offered various configurations. I chose the Luminoodle because it was the most straightforward setup. It doesn't come with a remote or ability to change color as other sellers do. I decided that simple was better.The installation was easy, I found a video online so that I'd know what to expect. Even after watching the video and being aware of potential pitfalls, I still managed to peel the adhesive away from from the light kit. It went back easily enough and was still sticky so I could attach it to the back of the TV. I have a 50" screen and this was just enough to go around 3 sides (like they show in the picture). So if you have a larger TV then the light strip wont fully cover both sides. Other reviewers have complained that the adhesive wasn't durable and would peel away from the TV. That has not been my experience. It sticks well, even when you double it over to make the 90 degree turns.I'm not sure that the light strip makes a difference in color perception, but it does make it easier to watch by reducing eye strain. I noticed that I feel more comfortable or relaxed while watching nighttime tv.What I don't like... This may just apply to my circumstance, so bear that in mind. My TV is set against a wall that is right next to a hallway. Everytime I pass the TV on my way to or from the bedrooms, I get a shock of light. It's not a deal breaker and I imagine I'll get accustomed to it. If I could put the TV elsewhere I wouldn't even mention it.If I decide to buy another of these I would be more inclined to get a unit that offers the ability to adjust the brightness and different colors for mood lighting.Bottom line - the Luminoodle is well designed, uses quality adhesive, provides bright light, makes watching tv more comfortable (for me anyway). Its a good product and reasonably priced. I would recommend to anyone looking to add bias lighting to their home theatre. It would also be an inexpensive method to provide under cabinet lighting and I may consider that at some point in the future.

Easy to install and works beautifully. I have no problems what so ever.

Luminoodle makes the best bias lighting I've found. Their pricing has gotten lower over the years as well, which is certainly welcome.

Excelente producto para luz bias con temperatura en 6500K . La versión mediana (6.6 ft) cubre sin problemas todo el marco de un monitor de 32 pulgas y uno de 27. Vino mucho mejor de lo que esperaba en cuanto a calidad el precio me pareció bastante justo. Sin duda lo volvería a comprar.

LED light strip with a strong adhesive backing layer. Great for application onto TV screen/monitor. Provides enough bias lighting to ease eye strain. Love it on my gaming monitor. Though, folding the strip around right angled corners is a bit tricky, but after some trial-and-error, I made it work. Overall, good product.

Habe die Beleuchtung hinter dem Fernseher, sehr gute Qualität

These are the second set of Luminoodle lights I have bought. I bought a set of these a while ago after reading the reviews and I have to say they were brilliant. I then upgraded my tv recently and made the mistake of trying regular LED strip lights that had various colours. I noticed the difference immediately in the brightness and the difference to watching the tv with the standard LED strip light ie. Weren’t so bright, so didn’t really give the tv screen picture much depth. So I bought this set and applied them. Turned the tv on and noticed the difference straight away. These luminoodle lights are so much brighter and clearer than regular LED strip lights, and they plug straight into the usb of your tv so they come on automatically when you turn on your tv so no need for a remote. will say my old flat screen tv didn’t have a usb socket as it was old, so I just used a regular usb plug and made sure that was on the same extension lead as the tv plug so they would come on at the same time as the tv. If you didn’t want the backlights on every time you watched tv and wanted it just at night, you can just use a separate usb plug and socket and turn them on and off when required. They’re really easy to apply, and really do make a difference to watching tv.

Lamentablement se quedó corto para una television de 32 pulgadas, tuve que arreglarmelas para que ocupará todo el hueco posible, hacer giros es tremendamente dificil por no decir imposible. El mando funciona genial y ningun led ha fallado, veremos como evoluciona