Stepping in the Smart Life Era we can own Smart Things except our handy phones or tablets, just like RGBW Bulb Lights! We don't need old inflexible Light Bulbs! Wherever you stay in your house, just control all the lights/Strips with only one mini remote control, on/off, colors changing, long distance accessible, all operations easy and portable! What we offer are the 2.4G LED Remote Control and RF controller for the LED strips. When you already have RGBW LED Bulbs/LED Strips, then you'll need this group. RGBW Remote Control: -Linking new Lights (1 to 4 Zones) -Touch both Keys and Dimmer -On/OFF Switch and Touch Color Dimmer -compatible with all RGB/RGBW LED Bulbs, 5M distance 2.4G remote control Strip RF Controller: -Connect a Strip Light with Socket on the controller. If you wanna connect several LED Strip Lights, then you need to buy more RF Controller for connecting, just like pictured. In this case only one remoter Control needed. -For RGB LED strip light, the white is mixed from Red, Green and Blue, so the white is not pure. / -For RGBW led strip light, the white is pure white. Unlink Bulb: 1, blank out the bulb which you wanna unlink 2, then charge it again, once the bulb lights pls press the digit on the "on" button(over the digit there is vertical direction) which controlled the buld for about 4 sec immediately. The light will flash 9 times, this means unlink succeeds When you want to unlink all the bulb, press the master switch (the vertical direction), other steps are identical. Note: Not compatible with RGB Light.Package included: 1 x 4-Zone RGBW Remote Controller with instruction 1 x Strip RF Controller with instruction
M**.
Instructions are typical Chinese to English translation but operation pretty self explanatory - the only point to note is ...
Used in 20m external wall wash install in combination with a 200w led driver and x3 RGB slimline amplifiers.Control box - is small and compact 12v can either be connected be +/- screw terminals or a barrel jack. Screw terminals on the opposite side allow you to wire the the LED Strip - I have RGB strip but this unit supports RGBW on reflection I should have purchased RGBW as the would have allowed for a wider range of pastel colours and a bright white light. A strip of double sided tape is supplied for mounting.Remote - Takes 2 AA batteries and feels well built the controls are all touch sensitive and respond well. Instructions are typical Chinese to English translation but operation pretty self explanatory - the only point to note is you need to sync the remote with the control box before anything will work.Operation - I have the controller mounted in a waterproof box on the outside of the house the RF signal works outside / inside / halfway down the street. Colour wheel allows a good range of colours, dimmer settings work from full to nothing and everything in-between, there are 9 different modes allowing different combinations of colour fades / flashes and you can select the speed that each of these modes runs at. To be picky I thought the modes were a bit basic - but I comparing this to the xmas lights we have and not sure if they work in the same way. There is a option to control up to 4 zones independently but this requires a separate controller for each zone. The controller remembers its last setting when powered off from the remote or if power is cut from the controller - I have a light sensor installed between the mains supply and the LED power driver white so the lights comes on at dusk and go off a dawn.One thing that is not clear from the listing is that if you wish to control using a mobile device over WiFi is that you need to buy a separate bit of kit that links to the controller - as there is no visible connections on the controller so I am assuming the WiFi kit would link to the controller via the RF link.
S**A
Excellent remote & receiver.
Definitely very happy I decided to shop around for a good quality receiver & remote for my lighting setup, which ended up being this neat little product. I've setup a lighting rig using 3 receivers, and all of it was extremely simple & straight forward to control with this remote. It's touch sensitive in a good way, very responsive & no openings to get grubby or dirty on the front.The less obvious things about this I'll point out... Holding the on buttons for individual zones will show the full bright white colour if you're using RGBW, and same for the master on button at the top, which will set all zones to bright white if you hold it. The dimming control is superb, allowing every level of adjustment you desire by dragging your finger left to right or tapping on the scale. And the remote takes AAA batteries not AA as suggested in another review here, and they DON'T come with the product, but I knew that before buying.The receiver has dual inputs for power, so if you're wiring or using a 5mm plug in driver, you're covered. The 5 wire output has the screw tighteners to keep the wires in place & there's no fuss linking it to the remote. Simply pressing the zone on button after flicking the power on links the receiver & the LED strip flashes 3 times, blatantly, to show it's linked.The only negative I've had is the red - green on the colour wheel seem to be swapped, either that or my entire LED strip reel is somehow reversed. I can't test this as I only have the one remote & a huge reel of LED strip, but it makes no difference either way. And no it's not my wiring, as I have different circuits running in parallel & I'm using multiple receivers. So it's either the remote or strip, but makes no difference as it all works.I couldn't be happier choosing this product & i will buy again in the future when I decide to do some more lighting.
M**R
Excellent upgrade to existing 44-key LED system
Once set up this works fantastically well. I have two sets of RGB LED strips running on this and a second controller. Very responsive, range is about 7m and doesn't need line-of-sight. The IR controllers I used previously (standard one included with 5m LED strips) had ranges from 10cm to 1m.Setting up the first controller was very easy, but the second required some patience and several attempts before it recognised the remote. Took maybe five minutes, and once done everything worked perfectly. This is the reason I have rated four rather than five stars.Unlike the 44-key control boxes that come with most of the SMD5050 strips, this controller has a connection per wire (four or five total, depending on whether you use RGB or RGBW strips) instead of a four-way plug. I took a spare RGB extension cable I already had (https://www.amazon.co.uk/dp/B00H70FO1Q/ref=cm_cr_ryp_prd_ttl_sol_14) and cut it in half to create two wires-to-plug leads.
H**D
I highly recommend the XCSOURCE DC 12V 24V Magic UFO LED WIFI ...
Flawed design of the controller/remote, this states it is Comptable with RGBW strips like the one that comes with it but the remote gives you no option to control the white LEDS on your strip at the same time as the coloured ones, it's either one or the other..I highly recommend the XCSOURCE DC 12V 24V Magic UFO LED WIFI Controller for RGB RGBW RG... http://www.amazon.co.uk/dp/B00Q7STR4E/ref=cm_sw_r_cp_udp_api_dyVKxbD202CB2Which I've now replaced it with. Although it requires you to have wifi and it to be on, so if you don't have it or you turn it off at certain times then I really recommend a Bluetooth version of it. Actually I regret not getting the Bluetooth version myself because it takes my new Virgin media HUB 3.0 a while to turn on, as we turn it off every time we leave the house so I don't have immediate control over the lighting.Any questions just post them under my review and I'll be happy to answer them :)
N**K
Great for the Price
Great for the Price, the color mixer does not alow adjustmentof white -it only mixes the RGB, however is some of the colour mix modes the white is included. the white is controled seperatly when you double tap relevant sub master the on 'I' then the fader.
Trustpilot
1 week ago
1 week ago
