SAMA NEVIEW 4503 Mid Tower PC Case with Dual Tempered Glass Panels, 4×120mm ARGB Fans Pre-Installed, High Airflow ATX PC Case for Case PC Gaming, USB 3.0×2, Type-C Port, Supports Top 360mm AIO – White

This is a great full ATX case. Plenty of room for the installation of my RTX 4080 Super on a ASUS TUF Games Z890 Mother board. The power supply unit installs at the bottom in separate air flow than the main box. Cable management is made easy as you can run everything behind the mother board. The glass is tempered and looks great. It comes with 4 RGB fans that interface though an included RGB hub. The directions that come with this case are not good and provides no guidance on how the RGB hub should be hooked into the mother board. If you get this case use a SATA power cable from your PSU to power the RGB fan hub and connect the ARGB cable from the hub to one of the three prong ARGB connectors on the mother board. You can manually change the colors using the LED button on the front control panel or if you push and hold that LED button for 7 or 8 seconds the mother board can control the case fans colors. Also know, there is no fan speed control for the fans that come with the case, the hub does not have that interface. The fans do keep air flowing very effectively. I installed a TRYX Panorama SE 360 ARGB 360mm AIO and running a full bench test my CPU and GPU temps have never exceeded 65C. Normal temps average around 37 to 50 C while gaming. The fans that come installed in the case are very quiet.

I decided to go with this case for my ultimate build, and I don't regret it a bit. The case looks even better in person, it is big though, and a bit heavy, perfect for me as I like my computers big and imposing. The fans are nice, syncs well with the rgb in my cooler and rams, the light modes are varied and cool, there's multiple choices to make your pc lighting look great. A small problem would be the cable management at the back of the case, the cables come a bit tangled up and you must rearrange everything to make it snug and clean. Besides that I didn't have any other problem and the installation was swift. Totally recommended for its price as the quality is incredible.

This case is large and of good quality. It looked amazing once I was done building my son's PC. There a little unit in the back that all the fans plug into so you dont have to worry about plugging them into the motherboard and having enough slots. it comes with 4 fans preinstalled in the case and the LED colors are good.

BIG NOTE!!! For this case when purchased in black! The glass is tinted, the images almost make you think they are clear but it's definitely tinted you can see in the photos. Luckily for me with how easy it is to remove the panels I run it with no glass when I play it. Second note the 3 fans not on the rear of the tower are reverse finned to allow air flow in with the aesthetic of not looking that the fan supports for the motor. Last note when tucking the wires on the black side and you have a larger wad of wires, if sticking out just too far it will push against the panel and it'll not hold on.. learned the hard way. Overall its what I wanted from a case, I wanted to put my 360mm radiator on the side like I have it in this one. Love the glass and how easy it is. The removable corner piece perfect. I like the sneak a fan or hard drive under the bottom little drop shelf there and the hide away everything for your wires. It's also set up for the graphics card to be side mounted I'm definitely considering. The adjustment possibilities for all the fans are great because the holes are slotted it's amazing. Now you can set them to where it feels right rather than it being set although those slots end up making it feel flimsy that's just the other end of the coin when it comes to that. Great for supporting your radiators because most of the time when you have a corner of the case and your hoses coming off the radiator end up hitting the fan and makes you end up needing to try something different. So definitely satisfied, if I get another definitely white but I do love my grey and black theme!

They packed it well. Case arrived without any visible damage. I got this case for the following reasons: 1. My prebuilt PC case was too small to house an AIO. This case is able to fit my Arctic Liquid Freezer III 360mm AIO CPU Cooler (Top Support). My previous case was a tight fit and the AIO took up a lot of space and was squishing the PSU Cables for the CPU connectors. This case leaves a decent amount of room and the PSU cables is not squish by the AIO. 2. I preferred a Front IO Panel on the bottom of my PC since it will be sitting on my desk. 3. Price is good 4. ARGB fans pretty and this case comes with an ARGB hub 5. It fits on my desk. 6. The amount of USB slots on the IO Panel. 7. This case offers a lot of ways to do cable management in the back of the case. Zip ties and twist ties are included. Took off 1 star only because it's almost perfect, but has some minor inconvenience during the setup process. 1. The back of the PC case, the IO shield port is sunk in and not flushed, making it kinda difficult to line up my motherboard. 2. After turning on my PC, it has a funky plastic smell. Tolerable, but I hope it goes away. 3. I had no idea on how to switch the IO Panel from the side to the front, instruction manual left it, I was able to find 2 screws on the sides of the IO panel. Instruction Manual could do with more documentation. 4. After moving the IO panel to from the side to the front, the cables attached to the IO panel is very short and it was difficult to screw the IO panel back onto the front of the case. The IO Panel cables needs to be longer by like an extra 2 inches. Summary: Good case. Setup and instructions could be improved. Update: The included fans looks nice, but I can't control the speed on them which is useless. I have a I9-14900K CPU which gets hot really easily and I need as much cooling as possible.I will be replacing the default fans with pwm fans.

Llegó en perfecto estado, aunque la caja del gabinete llegó dentro de otra caja innecesariamente enorme jaja, ya que en su caja traía sus protecciones necesarias. La calidad es muy buena, las vistas son muy bonitas y el espacio para poner una figura le da un toque muy bonito al diseño. Las luces pueden apagarse con facilidad, vino con 4 ventiladores lo que viene muy bien! La instalación fue sencilla, no hubo nada más difícil de lo normal. Un gabinete muy bonito 💙

The only issue I found is the installation of several hard drives on case. It has a nice space for a ssd 2.5 drive but if you have more disks 3.5 size it becomes really difficult to install them. The case have the space but rails have to be created to allocate these extra hard drives. other than that is a very elegant case with really good air flow with the fans provided

Nice midrange case with features found in big name cases. However the HDD bracket in the back make cable management very difficult and the cage inside needed adjusting. I would consider this case more of a DIY case.

This is a very nice case and all of the fans are very quiet. Even with the with an additional 3 fans for the water cooling. I have never built a computer with ARGB before and all of the included wiring was a little baffling but I got it working well. The glass is awesome. Definitely recommend this case.

Great case for the money allowing all modern parts to fit for future upgrading.Comes with 4 fans and a fan hub contoller that allows up to 6 fans.My only thing I wished it had was a fan controller with more ports but you can replace that.