BTF-LIGHTING SP630E Bluetooth LED Controller Support PWM Monochrome CCT RGB RGBW RGBCCT Or SPI TTL IC Chip LED Strip WS2811 WS2812B WS2813 WS2814 WS2815 SK6812 LB1934 etc DC5V DC12V DC24V

It works very well! If you try to do a group on the app with two or more it can be a little finicky but still works great overall I used them to control the lighting in my car for my subwoofers

I have three of these and they work consistently every time I would say if your actual strip isnt lighting up, don’t just leave it plugged with the wires and stuff. unplug it because you don’t want to like burn out part of it while you’re troubleshooting I can almost guarantee it has something to do with how much of the wrapping on the cable you stripped or if there’s enough contact between the little wires and the contact plate inside the thing like sometimes when you clamp it down if you didn’t take off enough you’re clamping down on rubber so it’s not actually conducting anything. If you get a flicker, maybe the wires wrapped back around or something but you want to clamp directly onto the wires. and that sounds simple, but I literally have issues with it every time. that’s just how these things are. I’ve had the same type of hook up with other devices and converters and things and always there’s some struggling. Also, if you get a flicker, you wanna unplug it right away because it probably means that like one of the wires is not in but the other ones are so those ones are trying to conduct power, but there’s too much power going through them and you can destroy the strip.

At first I was unable to get this to work. After some research and some input from the seller it is now working great!

$230 on BTF products all of them designed to work with each other or at least that's what they told me first controller hooked up to a DC 24 volt power supply made by BTF damn near caught on fire in my hand. Thank God I didn't follow the instructions and mount it before powering it on would have had a fire department in my house. Second controller with a different power supply wouldn't provide enough power to power two different light strips made by BTF. Will be returning everything I bought and going with a different brand and solution for what I need. Also for anyone who doesn't know you cannot buy all in one kit from BTF everything is a la carte.

Biggest problem I had was trying to read the instruction - very fine type. Easy to install, connect and set once you master the BanLanX app. Cost effective, works well.

Works good

I ordered an inexpensive Running Water controller, but it was flickering like crazy and would burn out after a day or two. I got tired of dealing with them and bought this instead. I was pleasantly surprised that once I got the right combination to control the BTF Light Strip (FCOB Addressable WS2811 IC CCT COB LED) - it was able to animate the on when given power from the main switch. Since I'm using these in the closet, I may even replace the WLED Athom controllers since I don't need WiFi control or colors and configurable segments. When it comes to flickering, I found that WLED controllers might not deliver a clean signal even after connecting to a larger amperage LED driver. I will order more of these for my simpler setups with my BTF lights. I've tested with FCOB WS2814, SK812 RGBW, and FCOB WS2811 IC CCT LEDs after running a firmware update. Just be sure you use the correct voltage!

My rgb controller of choice. The addressable functions are good as well- I just have a slightly better controller I use in that situation but this one is a bit more affordable.