B&C Home Goods Anti-Slip Toolbox Liner - Adjustable, Protects Tools, 16" x 16 ft

This liner is just what I hoped it would be. It’s thick, stays in place, easy to cut. I bought it to line drawers of an older Master Mechanic tool chest. This liner is much thicker than the liner that came with my new Craftsman tool chest. I’m glad I took a chance on this rather than purchase an expensive roll of Craftsman liner. I expect this to hold up very well. But I’m not a heavy user of my tools. This is a liner I would buy again.

The liners in a couple drawers in one of my toolboxes were really getting on my nerves. Apparently the good liners in my other box are produced exclusively for SnapOn and you'll pay for it too. This isn't as nice a liner (the SO liner is just perfection) but it's not bad at all. The old liner was bunching up and letting tools slide around or it was that grid type stuff I could never stand. I swapped it into and reorganized a pair of drawers that needed it badly and so far I'm happy, it's not AS grippy as the SO liner but the little bit of give to it really does help hold tools in place and keep them from sliding around. I'm sure eventually I will work my way through the box and replace them all. This is a good drawer liner, I would and may have to purchase it again. It's similar to the HF solid liner but a good bit cheaper and it may even be nicer, they're pretty close so far. We'll have to see about durability. Bottom line, I like it. A few months in and I've replaced the liner in another drawer (box has been filled for years but I had to reorganize a drawer) and the other 2 drawers are still holding up great. This stuff is way WAY better than that grid type liner that the box had in it when I bought it. After a few months of opening & closing some of the pliers have shifted a touch but nothing requiring me to really move anything around. I'm also using scraps in a small hand tool box I'm cleaning up, this stuff is great!

Great value for the money. I used this to line the drawers in my new tool cart and I was completely impressed with the quality and ease of cutting. A sharp utility knife and a straight edge made it easy to fit the drawers perfectly. The thickness was very nice and my tools do not slide around. The price is a little more than some others but, after seeing the high quality of this product, I was very happy that I choose this one. I think this will last a lifetime. This is so much nicer than the other types that have holes, you do not have to worry about dust or anything getting where you do not want it. Product lays flat nearly right away.

I love this stuff.. due to fulfillment/shipping had some minor damage but was able to cut most of the damage and hide the little that was left.. Was able to easily complete my 8 drawer top chest.. The grid lines are askew so a straight edge is required but not a big deal.. Even the demo picture on the ad shows grid not straight but again NO big deal.. This stuff is strong for the job and has great grip.. This is exactly 16" so may need to second cut for a 16" drawer as the outside measurement given is for outside of drawer and not inside... This stuff is excellent to use.. Point off for fulfillment/Shipping..

Just perfect for my tool bench drawers.

Bought several Craftsman tool boxes and wanted to protect both the inside of the drawers from scratches and my tools. The rolls of material were wide enough that I cut them to flow up both the front and back of the 16" deep drawers about an inch on each side to help protect from tool rolling back and forth when opening and closing the drawers. The material is solid without the usual perforations. This keeps and liquids from seeping under the liner. Material is a very sturdy rubber about 1/8" thick with just enough give to keep tools in place. I bought 3 of the 24' rolls and each one was nearly perfect. The dimples in the material are not exactly square with the rolls sides so use a straight edge to cut, don't rely on the line of the dimples. The material lays flat immediately after unrolling so you don't have to weigh them down first. The end of one roll had wrinkles in it from being spooled up and had to flatten out about 6 feet. I would definitely recommend to anyone wanting a good tool box drawer liner. These will last as long as I need them.

Don't do a lot of reviews, but I'm going to share everything that I wanted to know about this pad before ordering. Looked at many different liners on Amazon, ebay, Lowes, harbor freight, etc. Decided to take a chance on this one because of the price for the roll length. Did not notice any odor for those of you who care about that. Grids make it easy to cut if you have good lighting. Cuts easy, clean, and quick with a razor blade, but kitchen scissors work just as good. 11 drawers and 2 compartments in the top in less than 30 minutes. Take your time on the first and use it as a template for the rest. Pad is 1\8" thick which is plenty. Don't be skeptical and look for something thicker. You're not sleeping on it. There may be thicker pads out there but this pad is dense and rugged. Pad appears to be impermeable. Ran hot water on it for 30 seconds and nothing came through. Wipes dry so it should be easy to clean. This is an upgrade on my old liner which lets dirt and grease pass through to the drawer bottoms. Compared to the old liner, it doesn't provide quite as much friction but the trade off for being solid, firmer, and better looking is worth it. Video shows that tools stay in place well so it's not a big deal to me. I cut out squares the same size for the new and old and put a roll of electrical tape on each for weight and put on a baking sheet. New didn't slide until about about 50 degree angle and the old made it to around 70 degrees. Both more than enough for a level drawer. Scraped fairly hard with a screw driver several times and it held up well. Would protect the drawers if something were to fall or scrape. Both sides look the same so they could be flipped over years later and look new again. Still have several feet left over which I will probably be using for shelves around the house and dashboard compartments in vehicles. Worth buying a large roll. Be creative and think of other uses. Tried to give an honest and unbiased review and really could not think of anything negative. It's clear that they put a lot of thought into making the perfect balance of foam/rubberiness(?) to provide the highest level of practicality. Hope this helps.

I recently restored an older toolbox that has 9 drawers and needed at least 20' of drawer liner. This roll was the perfect size. I first cut the edge square with a large steel square. I found that the pattern in the liner was not at an exact 90 degrees, so I cut every piece using the large steel square. It cut easily, looks great, and doesn't slip. Nice product, good value.

Impressed with the quality - came packaged neatly rolled up & was easy to cut with the markings on the backside. Tools finally stay in place when opening and closing the tool boxes. Will buy again when needed.

Perfect width for my toolbox. Easy to cut, worked perfect, doesn’t slide around whatsoever. Perfect for anyone who needs good durable mats for your toolbox.

IO

very pleased with the product many thanks

Good quality, used in caravan cupboards and shelves, purchased again for tool box