ARCTIC TP-3: Premium Performance Thermal Pad, 100 x 100 x 1.5 mm (Stackable to 2.0 mm Without Performance Loss), 1 Piece - High Performance, Particularly Soft, Ideal Gap Filler, Bridging Gaps

These are great. Easy to cut to size. Redid PS4 slim. No overheating problems combined with top notch paste for the main processor!

The ARCTIC TP-3 pads are a significant step up from stock thermal pads. They are incredibly soft, which ensures perfect contact between components without putting too much pressure on the board. Temperature control: 10/10. Installation: They are very easy to cut and apply. The consistency is just right—tacky enough to stay in place during assembly but easy to handle. Thickness & Compression: One of the best features is how well they compress. This ensures great compatibility even if your measurements are slightly off, as they mold perfectly to the gaps. Temperature Control: I noticed a visible drop in VRAM and VRM temperatures immediately after installation. They handle heat transfer much more efficiently than standard pads. Durability: Knowing ARCTIC, these will last for years without leaking silicone or drying out, making them a "set and forget" solution for any high-performance build.

Bought to repaste a MSI 3080 x trio lhr 12g. 1mm is for the vram chips around the GPU die. Absolutely phenomenal. Not only are they cheaper but the definitely make better contact vs the gelid kit which is actually almost double if not double the price. They also ran slightly cooler. Memory pre re-pad and paste was at 94-97c/ fans 65%. Gelid kit memory max that i saw was 85 at 65% and the arctics was staying at 83 but max of 84 at 65%. Reason for removing the gelids is because i didn't feel like they were making sufficient contact just by eyeing it but i could be wrong. But for half the price and in my opinion better contact and 2c less i would definitely go with arctic!

Replaced the worn/degraded stock thermal pads on my M.2 SSDs in my gaming rig with this 1.5mm ARCTIC TP-3 (stacked a bit where needed to hit ~2.0mm gaps). Big improvement: CrystalDiskInfo shows significantly lower temps now—worth the swap if your SSDs were running hot/throttling. Tips for sizing/cutting: Measure your gaps precisely (calipers help), then cut with a sharp tool like an #11 scalpel or model knife for clean edges. The 100x100mm sheet left plenty of leftovers for me, so small mistakes weren't a big deal—I only tossed one tiny messed-up piece. It's thick but compresses exactly as the compression chart on Arctic's site promises. Not super "sticky" like some pads, but has a nice tacky/moist feel that makes positioning on the SSD easy—no sliding around. Arctic's website support is excellent if you need extra guidance (charts, manuals, etc.). Highly recommend for anyone refreshing SSD/VRM/RAM pads—performs great without the hassle.

Legitimately the best thermal pad ever my laptop thermal paste was not cutting it was getting temps 99+ and with this installed it hasn’t even gotten hot too The touch 10/10 amazing thermal pad and I’m using a razor blade 15 advanced model and in boost mode there basically a paninipresss and it wasn’t even going over 90 while running modded gta at max graphics

Never an issue, always just works is intended.

I used these to repair an old 6800 graphics card and they work well. One sheet is plenty big enough to do more than a few repairs so you'll probably only need to buy one. It does take a steady hand and some patience, but easy to work with overall.

Replaced PS4 Pro console thermal pads with these. Runs super quiet now. Pads are awesome!

Très bon pad thermique. Je l'utilise sur une Rx 5700 XT qui normalement chauffe beaucoup. Elle montait régulièrement à 90°C. J'ai remplacé les pads thermiques sur la VRAM, sur les VRM et remplacé la pâte thermique par un pad résultat: 77°C avec MSI Kombustor au bout de 2 heures de test. Franchement très bon pad thermique.

Arctic har aldrig svikit mig förr och denna är inget undantag, grafikkortet (RTX2080) behövde nya och har fått nytt liv igen!

最近のMBに付いているM.2用ヒートシンクパッドと同じくらいの厚みです。

Excelente producto, compré de 1.5 y 1mm y 10/10 Lo usé en una RX 6800XT, el hotspot llegaba hasta 103° y después del mantenimiento no pasa de 80°, hablando de carga al máximo. Ya en reposo mantenía temperaturas de 45-50° y después del cambio mantiene 30-35° .

Probly the best low cost thermal pads. Found it easier to use sharp scissors over a straight blade and ruler. I was impressed with the temperatures. Iv tired just about all the thermal pads amazon sells to try and tame my alienware gaming laptop temps havent even passed 90°c when running benchmarks