FLIPSKY 75100 FOC 75V 100A Single ESC Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller

Update: As of Jan 2023 there is a firmware update so this will run on the VESC v6 firmware. You'll need to download an manually update the firmware the first time. See the esk8 forum for instructions. This firmware fixes some issues in the stock firmware that ships with the device. I upgraded the motor and ESC on a Razor e100. This fit the bill and has plenty of overhead. Using with a Flipsky 6354 motor. So far no issues but this is bare bones so you may want to spend more money on an on/off switch. The VESC software has profiles and when I put it in Dad mode it pulls almost 100 amps. Kid mode allows you to cap top speed and max power which is nice. Definitely not an entry level esc but it works once configured.

After 4 days the Vesc I ordered dies with in 4 days I’m not happy

Super

First thing, the Flipsky VESC's never ship with the correct firmware installed. I installed the 75100 firmware with a 72V battery, and it read it as 120V and wouldnt run the motor setup due to an overvoltage. You can bypass by using 130V as the max voltage, or for some reason, use the 75100 V2 firmware. It works. Was a PITA but finally got it to work. Do not put this in a bag if using it for an Ebike, it will thermal throttle, I found that out quick. This controller needs to be in the open not in a bag.

These things are very weak, Easy to kill, Not ratted for 72v Batteries Systems. 2 in a row both got extremely hot and stopped working. Very safe setting were used on the 2nd one and still ended up not working. VESC TOOL Recognize that this controller is only capable of 72v MAX! So you cant used a Charged Battery. Im Not Buying This Brand Again. A very basic 80amp black box works way better.