Real Avid Universal Glock Sight Pusher – Front & Rear Dovetail Sight Installation & Adjustment Tool – Works with Glock 19, 17, 43, 26, 22, 48 & More – Includes 2-in-1 Pin Punch & Nut Driver

All my handguns are Glock. I bought this sight pusher to use on my Glock. Upon opening it and trying to get it set up correctly, it took me about 5 minutes to figure it out. The direction sucks and did not mention any of this. AS I try to lock my slide into place, I notice that my slide sits too high and the pusher is hitting the slide. I spent a few minutes trying to adjust it down but it did not make any difference. After looking at the sight pusher, I notice there are 3 plates on the bottom, 1 is black and the other 2 are silver. If your slide sits too high, you have to remove the silver plate. I removed 1 of the silver plates and my slide was still sitting too high so I had to remove both of the silver plate and kept the black plate on there in order for my slide to finally sit in correctly. Using the sight pusher to push out the rear sight was very easy. It was putting the new rear sight back on that will require you to use some power. All in all, it worked for what I needed it for but I don't know if it's worth the price. It's almost $100 for this, when you can just use a rubber mallet for $10 on here and will do the job better. So to make this short, this sight pusher works but I would rather use a rubber mallet instead. It's cheaper and so much easier to use. Update 2025: after owning this product for close to a year and getting familiar with it. I wanted to update my previous review on this product. This sight pusher is actually the best one out there! Easy to use and putting on the rear sight is a cake walk. I highly recommend this sight pusher.

Overall I really like this product and it's a good buy. If I can offer 2 suggestions to improve the product....First, I'd like to have a non-marring tip on the adjustment tooth so as to avoid banging up sights. I did get some scuffing on my Ameriglo UC rear sight, but I'm honestly not upset as I will be using that particular gun alot and it will get some wear anyways, but if I were maybe setting up a nice "show piece" (yes, even Glocks can be made to look very nice) with something like some Heinie Gold Bead sights, I'd likely want to avoid the scuffs. Secondly, I think it would be nice to have a small cut out in the side of the sight pusher, just to one can get a slightly better view of the alignment when shimming the slide in place. Overall though, great little product! The instructions on ReadAvid's sight are easy to follow. Quick hint, you Glock 17, 19, 26 and 34 shooters just need to set the shoe orientation to "wide" and use the small shim. The tool is mostly metal, but the plastic grip is easy on the hands and it wasn't too hard to adjust the rear sight. It's a nice touch to get the 2 in one combo tool which stores in the adjustment handle. The bit for the front sight actually fits snug like you would expect it too, even better than the OEM Glock version IMHO. It's reasonably compact, so if you have a larger range bag (I use an old 5.11 backpack), this will be a nice addition to your range kit. This is also a nice gift option for the Glock owner in your life. Worth a try!

I used this to replace the rear sights on my 17L gen5 with mos slide cut. This tool worked very well removing the factory sights, and installing the new aftermarket cowitness sights. The extra 2 in 1 tool seems to work very well, also. I have not used other sight pushers before, but this one worked very well for me.

If you're looking to just change sights on Glocks, this thing is awesome. Well set up, easy to use for either a 43 or a G17. The front sight tool is high quality and has a reversible Glock pin tool. This is an excellent sight pusher for Glocks, especially for the money!

As with other Real Avid firearm tools, this is a quality, well made and sturdy tool that should last a long time with proper use and care. I have a G19 clone that I was having a difficult time with getting the rear steel sight mounted. I tried using other sight tools, to no avail, even with sizing carefully with small files and lubricant. I returned the tools. I saw the Real Avid Glock rear sight tool, and on sale here on Amazon, so ordered one. It came quickly. I took my time, with some more minor filing, and worked slowly tightening and releasing the sight pusher until the sight was, finally, mounted. This is a great tool, and I highly recommend it. Good job, Real Avid, I will definitely be purchasing more of your tools!

Vice moves as it tightens. Scratched sights as it did and ultimately didn’t move the sight all the way

Excellent tool for removing the rear sight on my glock 19 gen 6.

This tool makes pushing, moving or adjusting the rear sights a breeze; without marring the finish of your slide or destroying the rear sight. I had my old rear sight off and my new night sight back on and centered in less than three mins. If you own more than one Glock or plan on changing sights, this tool is a must. The hardest thing is figuring out how to get the spacers off that are not needed for any standards or compacts. you have to raise the silver foot thing up, enough to remove them, then put the slide in and tighten. The worst thing is the goofy tool that stores in the turning handle. Its a great idea, but a poor implementation. Its unscrews and comes in half, when you're trying to get the front sight screw out and you can't get enough torque on it, while keeping it on the tiny screw on the bottom inside of the slide. I finally had to grip the tool with Vice grips. If that tool wasn't such a pain, I'd have given this a 5 stars!!! Will use again to upgrade other sights...

This is a great sight pusher. Easy to use (g17.5) on a side note also fits m&p slides (back sight didn't try the front) but the BUT the front sight tool... hex driver.. didn't work, almost like it wasn't cut or punched center. Had to use another tool for that..