Dracaena.io 120mm AIO CPU Cooler, Intel & AMD, ARGB, PWM, 180W TDP, Black | remote control · hydraulic bearing pump, 40,000-hour life · aluminum radiator with a copper cold plate

This is a great performing and versatile pump, radiator coil, and controller combination that has an easy to use remote included. All the cables and mounting components that you should need are included in the box for the compatible cpus. There is even a syringe of thermal paste. I found it really all-inclusive when assembling and hooking up.Although the smallest version of this cooler, with just a single 120mm fan and radiator combo, this system brings plenty of cooling capacity to your setup. The cooling effect is almost immediate in my experience, too, so the cpu temperature doesn’t get a chance to become too high.The installation of the pump onto the mounting brackets is misassembly-proof due to notches in the pump body so that you cannot install the metal brackets the wrong way. It takes a bit of patience to align the brackets, but this isn’t intended to be a clumsy and loose installation. The components are high quality and fit snug.The 120mm PWM fan generates very little noise and that is really only noticeable with the higher speeds. LED lights in the fan synchronize with the pump so you get a great dancing color display from both.The controller board LED cable can be either connected to the motherboard or not, if you’d like to use the included remote instead for lighting control. And, there are 6 ports of each, 12v 4-pin Fan and 5v 3-pin LED, on the controller for plenty of devices. There is even a connector to tie the case switch into the board for single button lighting control. To minimize space and allow versatile installation, the board doesn’t have a bulky case and includes a pre-installed adhesive foam backing. Just peel and stick. Mine stuck solidly on the first try.There are several programmed lighting effects and repeat patterns, beyond the typical single color look, and different light brightness levels. So, enough options to keep from getting bored.To top it off, the customer support is great with troubleshooting any installation and use challenges not covered in the paper manual. This was a welcome bonus when I had an issue with the LED lighting that turned out to be an installation error on my part. Dracaena made sure I was able to get the system operating properly and that is often lacking in other company’s support.Overall, this was a great deal for the quality of the components, easy of assembly, and thoroughness of customer support.

I just got this from the post office.I got the model with only one bracket that slides into the pump. I could not figure out how to stop it from sliding off so I stuck an old case screw into this hole.The back plate uses two adhesive strips to hold it in place till you can use the screws to attach the pump on the front. My old case does not give me easy access to both sides of the mother board.My case will not fit the radiator in the position so I will have to move the fan to the other side of the radiator.This could be considered damaged now so I can't return it. I'll update in a few hours once I get it installed and tested.Edit: It is working great. A little hard to install but my CPU temps are now under control and not spiking past 100 degrees like it was before.

Actually ordered two other before this one both did not work with older amd 3 like they promised not only did this work it's great! Easy to install and work exactly like promised!

cheap and works. comes with everything you need for amd or intel. it does stay very cool. even on a 8 core running at 4.7ghz. never above 100F. the instructions leave much to be desired. i run 6 rgb fans in my case. cant say about noise level.

I ordered this Dracaena CPU water cooling setup to replace an existing water cooling unit on an old Intel-based (LGA 1366 socket) gaming rig. So glad I gave it a try! It's working like a champ, and helped resurrect my old PC. A search on my motherboard/CPU combo revealed I had an LGA1366 CPU socket design. This is a really outdated Intel processor design, but the machine was perfectly fine, other than the failed cooling system. Some people suggested that water cooling systems were no longer made for old CPUs, but this Dracaena system said it was compatible with a variety of LGA socket types, including my old LGA 1366. With the included adapter brackets and screws, I was able to secure this new cooling hardware on my old CPU, and it's keeping the CPU at temperatures lower than I'd previously seen! I thought the brackets would interfere with some of the transistors on the motherboard, and the CPU hold-down arm, but the included brackets had just enough offset to clear the adjacent hardware. I was pleasantly surprised. The screws that hold the pump to the CPU are spring loaded, so they keep tension on the CPU once you apply the thermal paste and screw it in place. Fan is relatively quiet as well. Your experience may vary, but in my case, it's a winner! I can't really comment on the LED lighting system. My old motherboard didn't have an LED plug/port. It cycles through a rainbow of colors, and I can't seem to change the scheme with the remote control. But I think that's a limitation of my system, not the Dracaena unit. But the lights are not a priority to me. I'm just glad it's keeping my CPU cool, and I can keep my old system chugging along!

i love it looks awesome

I purchased this unit in June 2025 and didn't start the build until a week or so ago. well the parts need to mount this cooler were not in the box, "O" dam how am I going to get the parts. I sent an email to the seller, well to make a long story short after a few emails explaining the problem Dracaena.io sent me the parts needed at no cost.I install the cooler and it keeps my CPU 5 degrees cooler that the cooler that came with the CPU and much quieter.The customer services from this company has been outstanding, I expected to pay for the missing parts after have the unit for almost 9 month, but no just sent the parts first class mail.In the future for my computer needs I will chcek with them first.

Complete waste of time. Fans are loud as hell running at 100% with no ability to adjust speed (if you follow the directions). Despite all noise and power, did a worse job at cooling my AMD 8700G than my Dark Rock cooler or the OEM fan! Temps consistently running hotter than normal under the exact same testing conditions. The only reason I give it 1 star is for the cool light display. If you truly want a CPU cooler that does what it says stick with Noctua, BeQuiet, or Cooler Master. They cost more, but worth every penny.

Easy to fit, as advertised. Nice RGB and quiet.

Sehr guter Kühler, kann ich nur empfehlen.Preis/Leistung ist Top.Sieht sehr gut aus und Kühlt sehr gut.

冷却性能が良く、重宝しています。

Have not really used it since I had comparability issue with a MSi motherboard and an intel 14 th generation cpu. Would not boot and ca not flash the bios. But I must say the cooler was easy to setup the instruction manual is understandable unlike other manufacturers. Installed it in under 30 minutes and everything seem to work the remote is a great add on and if you into rbg lighting there are plenty of plugins on the board they supply, same for extra fans. The board has plugins for fans to the f your motherboard does not supply enough. Great product build and easy setup.

my mb is msi B760 gaming plus wifi lga 1700 intel 12 13 14 th cpu support and i buy that drakaena 360 mm water cooler and i cant fit it like that.